Page 1
®
ORX 1702
yellobrik
Analog Sync / Video Fiber Optic Receiver
• Supports analog black burst, bi-level, tri-level
sync signals and NTSC and PAL composite video
• Two outputs
• Broadcast quality performance
• Versions for LC, ST or SC fiber connections
• Multimode version available
• Supports hot swapping and hot plugging
• yelloGUI compatible to access additional internal settings
Technical Specifications
Fiber Input
Singlemode
LC
singlemode
Using the same basic module we provide four versions suitable for LC, ST or SC
singlemode fiber connections, as well as a version for multimode fiber. Each version
has a different SFP installed.
The ORX 1702 is a compact analog sync or NTSC/PAL composite video
to fiber optic receiver. This device is specifically designed to combat the
restrictions involved with the distribution of broadcast quality analog
reference and composite video signals over long distances.
When paired with the fiber optic transmitter OTX 1712 you have a very
cost-effective optical transmission system for analog sync reference
signals or NTSC/PAL composite video. This device is particularly useful
for reference sync distribution between remote installations to maintain
correct synchronization.
Unlike other very basic analog to fiber conversion solutions, the ORX 1702
incorporates technology to maintain a very high degree of sync and burst
phase stability during the fiber reception and analog conversion.
The module receives an SDI signal (including reference and other relevant
information) before it is converted to an analog signal. Therefore when
the ORX 1702 is used for 525 or 625 SDI video sources it is possible to
convert the signal to an analog NTSC or PAL composite output directly.
For example: if the 525 or 625 signal is received from an SDI video
transmitter OTX 1812.
ST
singlemode
SC
singlemode
LC
multimode
Fiber Input
Multimode
Analog Output
Power
Physical
Ambient
Model #
Includes
yelloGUI compatible
ORX 1702 LC Version Shown
1 x fiber optic Input
LC, ST or SC connection
SMPTE 297M - 2006
Input range (wavelength): 1260nm to 1620nm
RX sensitivity: -3dBm to -19dBm
RX active LED on side of module
1 x fiber optic input
LC connection
SMPTE 297M - 2006
Input range (wavelength) 780nm to 880nm
RX sensitivity: 0dBm to -15dBm
RX active LED on side of module
Sync = analog black burst / SDTV bi-level / HDTV tri-level
Video = NTSC / PAL composite video
2 identical outputs provided
75 Ohm BNC connectors
NTSC SMPTE 170M, PAL CCIR624
Analog tri-level sync SMPTE ST 274, ST 276
Return loss: 46.5dB to 10MHz
+12VDC @ 3.5W nominal - ( supports 8 - 24VDC input range )
Size: 140mm x 42mm x 22mm (5.51” x 1.65” x 0.86”) including connectors
Weight: 125g (4.4oz)
5 - 40ºC (41 - 104ºF) 90% Humidity (non condensing)
ORX 1702 LC - ( EAN# 4250479320383 )
ORX 1702 ST - ( EAN# 4250479320390 )
ORX 1702 SC - ( EAN# 4250479320406 )
ORX 1702 MM (multimode) - ( EAN# 4250479320413 )
Module, 12V DC power supply and plastic transport case
The ORX 1702 provides two analog outputs and support for LC, ST or SC
singlemode fiber connections. An LC version suitable for multimode fiber
is also available.
®
LYNXTechnik AG
www.lynx-technik.com
Power Adapter Options
The kit INCLUDES AC power supply. The power adapters below are optional.
P-TAP 1000
Use with a standard
battery P-TAP power
source.
LYNX Technik AG
Brunnenweg 3
D-64331 Weiterstadt
Germany
PH +49 (0) 6150 1817 0
info@lynx-technik.com
LYNX Technik Inc
26366 Ruether Ave.
Santa Clarita, CA 91350
USA
PH +1 (661) 251 8600
infousa@lynx-technik.com
XLR 1000
Use with a standard
4 pin XLR camera
battery power source.
Specifications subject to change
LYNX Technik Pte Ltd
19 Burn Road
#01-01 Advance Building
Singapore, 369974
PH +65 648 1622
infoasia@lynx-technik.com
Loading...