TecNec ES-562U User Manual

COMBINATION CLOCK / TIMER

In many instances having a clock or a timer is just not enough. And just as often, having a separate clock
and a separate timer is inconvenient. With those situations in mind, ESE offers the convenience of the
“Clock/Timer”... two units in one!

The advantages are obvious... two units and only one enclosure with one set of shared controls.

The ES-562U(12 Hr)/ES-564U(24 Hr) and the ES-572U(12 Hr)/ES-574U(24 Hr) are combination six-digit 12 or 24
hour Clocks (Real Time of Day) with a built-in “Up” Timer (Up/Down on the ES-562U/ES-564U only). These
units can be switched back and forth (from “Clock” mode to “Timer” mode) without losing any “Real Time”
or “Elapsed Time” in the process. Both units feature five separate controls (“Timer”, “Up/Down”, “Set/Stop”,
“Select/Reset” and “Clock”) that are used to operate the “Clock/Timer”.

Features:

• Easy Installation • Long-Life LEDs • 12 or 24 Hour Format • Optional ESE Serial Time Code Output

• Simple Operation • Dual-Function “Clock/Timer” Display

• Remote Control Inputs (Optional On ES-562U/ES-564U)

ES-562UQ

ES-572U ES-574UMES-562U

ES-562UP

DESK MOUNT (Rack Mount Optional)

The ES-562U/ES-564U is a six-digit “Clock & Up/Down Timer” with .56” yellow LED displays. The unit is housed
in a desk mount enclosure. Specifying option “P” mounts the unit behind a 1¾” x 19” front panel. The unit
is controlled via the five front-mounted switches and can also be operated by remote control if the option
“R” is specified. Option “ESE ” also includes an ESE Serial Time Code output which is capable of driving any
of the “Remote” Displays described in the “Master Clock Systems” brochure.

CONSOLE MOUNT

The ES-572U/ES-574U is a six-digit, console-mount “Clock/Timer” with .4” red LED displays. The unit is controlled
via the five control inputs accessible on the rear-mounted edge-card connector. No switches are supplied on
the unit unless option “M” (Front-Mounted Switches) is specified. Option “D” (Remote Control) provides push
button switches mounted to a switchplate that is connected to the unit via a six foot cable with connector.
The ES-572U/ES-574U, when in Timer Mode is an “Up” Timer only.

SPECIFICATIONS

ES-562U ES-564U ES-572U ES-574U

Power: 5 Watts 5 Watts 4 Watts 4 Watts
Electrical: 117 VAC, 50/60Hz 117 VAC, 50/60Hz 117 VAC, 50/60Hz 117 VAC, 50/60Hz
Line Cord: 2-wire, 6’ 2-wire, 6’ 2-wire, 6’ 2-wire, 6’
Enclosure: Desk Top Desk Top Console Mount Console Mount
Mechanical (HxWxD): 2.5” x 8” x 6” 2.5” x 8” x 6” 2.2” x 4.5” x 4.5” 2.2” x 4.5” x 4.5”
Controls: Push-buttons Push-buttons Remote Remote
# of Digits: Six (Hr-Min-Sec) Six (Hr-Min-Sec) Six (Hr-Min-Sec) Six (Hr-Min-Sec)
Display Height: .56” Yellow .56” Yellow .4” Red .4” Red
Viewing Distance: 20 feet 20 feet 10 feet 15 feet
Format: 12 hour 24 hour 12 hour 24 hour
Options: Black, C, D, ESE, J, N, Black, C, D, ESE, J, N, C, D, J, M, UL, C, D, J, M, UL,
P, P2, Q, R, UL, W P, P2, Q, R, UL, W V(12VDC), W V(12VDC), W

10

142 SIERRA ST., EL SEGUNDO, CA 90245 [phone] FAX [phone] www.ESE-WEB.com