Tecnare Sound Systems IBZA Series, IBZA P204, IBZA6, IBZA6 Plus, IBZA12 Operation Manual

Keep these important operating instructions.

Check www.tecnare.com for updates.

Operation Manual

Version 2.5

Full-Range Compact Multipurpose Loudspeaker

IBZA Series

IBZA6

General Information

IBZA6 Operation Manual
Ver.: 2.5_UK 11/2016
©EXEL ACOUSTICS SL; all right reserved

The information contained in this manual has been
carefully checked for accuracy, at the time of going to
press, however no guarantee is given with respect to
the correctness.

Exel Acoustics SL accepts no responsibility for any
errors or inaccuracies that may appear in this manual
or the products and software described in it. Technical
specifications, dimensions, weights and properties do
not represent guaranteed qualities. As manufacturers
we reserve the right to make alterations and
modifications within the framework of legal provisions,
as well as changes aimed at improving quality.

EXEL ACOUSTICS SL
CL Encinar, 282 – Pol. Ind. Monte Boyal
45950 Casarrubios del Monte (Toledo) Spain
Phone: [phone] Fax:

[e-mail]

e-mail:

www.tecnare.com

Operation Manual

IBZA Series | rev.

2.50

2

Operation Manual

IMPORTANT SAFE INSTRUCTIONS

Before using our product, be sure to carefully read the manual and safe Instructions. Keep this document with the device all
time.

1 Read these instructions.

2 Keep these instructions.

caution around the enclosure with data
storage devices such as phones, computers
or hard drivers.

3 Heed all warnings.

4 Follow all SAFETY INSTRUCTIONS as well

DANGER and OBLIGATION warnings.

5 Only use attachments / accessories

specified by the manufacturer.

6 Use only with the cart, tripod, bracket or

table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart / apparatus
combination to avoid injury from tip-over.

7 If the equipment is used in a manner not

specified by the Exel Acoustic, the protection
by the equipment may be impaired.

8 Read the entire Product Information

document before exploiting the system.

9 Read the Rigging Manual before installing

the system. Use the rigging accessories
described in the rigging manual a follow the
associated procedures.

CAUTION: Rigging should only be done by experience

professionals.

11 Handles are for moving the system only.

12 Beware of sound levels. Never stand in the

immediate vicinity of loudspeaker driven at
high level. Professional loudspeaker
systems are capable of causing a sound
pressure level (SPL) detrimental to human
health. Hearing damage can also occur with
prolonged exposure to sound: 8h at 90
dB(A), 30 min at 110 dB(A), less than 4 min
at 130 dB(A) Source: European Directive

relating to the assessment and management
of noise 2002/49/CE

13 When setting up the loudspeaker or

loudspeaker stand, make sure they are
standing on a firm surface. If you place
several enclosures on top of one another,
use straps to secure them against
movement.

10 This speaker enclosure is capable of

creating a strong magnetic field. Please use

2.50

3 IBZA Series | rev.

Operation Manual

DECLARACIÓN DE CONFORMIDAD

DECLARATION OF CONFORMITY

EXEL ACOUSTICS SL

CL Encinar, 282. Polígono Industrial Monte Boyal. 45950 – Casarrubios del Monte (Toledo),
España (Spain).

Declara que el producto IBZA6 y sus respectivas opciones, cumple con las Directivas:

Declare under our sole responsibility that devices in the IBZA6 range of products, comply with
relating Directives:

(1) Directiva de Baja Tensión - 2006/95/CE
(2) Directiva de Compatibilidad Electromagnética - 2004/108/CE
(3) Directiva RoHS - 2011/65/UE
(4) Directiva RAEE - 2012/19/UE

(1) Low Voltage Directive 2006/95/CE
(2) EMC 2004/108/CE
(3) RoHS Directive 2011/65/UE
(4) WEEE Directive 2012/19/UE

IBZA Series | rev.

2.50

4

Table of Contents

Table of Contents

IMPORTANT SAFE INSTRUCTIONS ......................................................................................... 3

DECLARACIÓN DE CONFORMIDAD ........................................................................................ 4

1 Introduction ........................................................................................................................ 6

1.1 Welcome to Tecnare .................................................................................................... 6

1.2 IBZA Series .................................................................................................................. 7

1.3 The IBZA6 Compact Loudspeaker............................................................................... 8

1.4 Connections ................................................................................................................. 9

1.5 Processing and Amplification ..................................................................................... 10

2 Loudspeaker Configuration ............................................................................................ 11

2.1 Point Source ............................................................................................................... 11

2.2 Point Source with low-frequency element .................................................................. 11

3 Configuration .................................................................................................................... 13

3.1 Connection to PA4.450 .............................................................................................. 13

3.2 Connection to PA900 ................................................................................................. 14

3.3 Connection to T-44 Series ......................................................................................... 14

4 Integrating IBZA6 Using Subwoofers .......................................................................... 15

4.1 Integrating IBZA6 Loudspeakers Systems with Tecnare Subwoofers ....................... 15

4.2 Signal Delay ............................................................................................................... 15

5 Technical specifications .................................................................................................. 16

5 IBZA Series | rev.

2.00

Operation Manual

1 Introduction

1.1 Welcome to Tecnare

Thank you for choosing the high-quality Tecnare

EXEL ACOUSTICS SL.

Please spare a little time to study the contents of this manual, so that you obtain the best

possible performance from this unit.

All Tecnare

®

products are carefully engineered for world-class performance and reliability.

If you would like further information about this or any other Tecnare

contact us. We look forward to helping you in the near future.

As part of a continuous evolution of techniques and standards, Exel Acoustics
SL as manufacturer of Tecnare

®

products reserve the right to change the specifications

of its products and the content of its documents without prior notice.

Updates and supplementary information are available on the Tecnare

http://www.tecnare.com

Tecnare Technical Support is available at:

• (T): [phone] - [phone]

• (e-mail): [e-mail]

Thank you again for placing your confidence in Tecnare

®

IBZA6 System “Made in Spain” from

®

product, please

®

website:

®

products.

IBZA Series | rev.

2.00

6

Introduction

1.2 IBZA Series

IBIZA Series is the ultimate reference for rental productions, fixed installations and dance

clubs environments. It is a combination of high-end audio, sound quality, stunning aesthetics,
extreme sound pressure level and reliability. IBZA is a family of distinct format of loudspeaker
systems, engineered for different short-throw applications, including FOH systems, distributed
systems, side-fill monitors, complementary fills and, of course, dance environments, where high­output, low-distortion, and the highest quality sound are required.

The series is formed from:

• IBZA P204, passive ultra-compact loudspeaker, 120º axis-symmetric, 80Hz-20KHz.

• IBZA6, passive compact loudspeaker, 80º axis-symmetric, 82Hz-20KHz.

• IBZA6 Plus, passive ultra-compact loudspeaker, 70º axis-symmetric, 85Hz-18KHz.

• IBZA8, passive compact loudspeaker, 110º axis-symmetric, 65Hz-18KHz

• IBZA10, passive compact loudspeaker, 70ºx50º, 45-18KHz

• IBZA12, passive/active enclosure, (50ºx100º)x60º, 56Hz-18KHz

• IBZA15, passive/active enclosure, 80ºx50º, 48Hz-18KHz

IBZA Series constitutes a broad range of point source, full range loudspeakers that

providing high SPL, different directivities patterns and a good sonic performance off-axis.

The IBZA Series is suited to various sound reinforcement applications as a main or

complementary system.

IBZA Series enclosures are easy to integrate, combining sonic character with style. Its

aesthetic appearance makes it ideal for the most demanding architectural environments.

The DP Series Processor and T-Series amplified controllers are the heart of the
system. Thanks to their dedicated factory presets, they constitute an extremely advanced and
precise drive system for the enclosures.

Applications:

• Dance Clubs.

• Theatre and corporate events.

• Houses of worship.

• Touring.

• Live music venues.

Main Characteristics:

• Built in proprietary hardware for simple, fast and safe rigging.

• Enclosures made with the latest techniques ensuring a perfect and rigid construction.

• Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture

finish and protected with specially treated grills.

• 16mm or 18mm birch plywood. Finished in black semi-matt textured Durawood

weatherized coating. One recessed carrying handle.

• Powder coated perforated steel grid with acoustically transparent reticulated foam.

2.50

7 IBZA Series | rev.

Operation Manual

1.3 The IBZA6 Compact Loudspeaker

The IBZA6 is a small trapezoidal compact full-range loudspeaker of studio quality, designed

to be used in a wide variety of audio applications requiring a small, inconspicuous cabinet that
also delivers high sound pressure levels, low distortion, and uniform directional control.

The IBZA6 offers exceptional audio performance in a compact package. As a standalone
loudspeaker, the IBZA6 can be used for vocal reinforcement, front-fill coverage, and delay
coverage for under-balcony applications. Its wide conical directivity pattern gives smooth off­axis response - assuring the best sound where most of the audience is located. The IBZA6 can
also be paired with an optional subwoofer to create a full-range system.

Available series in a grey colour or white custom colour, the IBZA6 can be easily integrated
into any building style for ultimate discretion, satisfying the most demanding architectural needs.
Rigging options include wall mount, ceiling-mount and pole-mount in various orientations for
integration into any possible situation.

IBZA Series | rev.

2.50

8

Introduction

IN speakON® point

1+

1-

2+

2-

Connection

LF +

LF -

NC

NC

1.4 Connections

IBZA6 loudspeaker utilizes Neutrik
connectors on the rear of each IBZA6. These connectors mate with Neutrik
compatible in-line cable connectors. Only two pins (1+/1- ) of both connectors are wired in
parallel. The following subsections describe the electrical connections. Other configuration
should be requested at the purchase time.

The IBZA6 uses the pin assignment 1+/1+.

Using one as the input, the second connector allows
for direct connection to a second cabinet in parallel.

®

SpeakON® connectors. There are two NLT4

®

NL-4 or NL-4

Internal pinout for IBZA6 enclosures

9 IBZA Series | rev.

2.50

Operation Manual

1.5 Processing and Amplification

Only operate Tecnare loudspeaker with a correctly configured Tecnare preset. Tecnare
offer a complete solution that guarantees the highest level of performance. A complete range of
controllers, amplified and amplified controller with DSP are available to get this objective.
Otherwise, there is a risk of damaging the loudspeaker components.

1.5.1 Processing

There are two options using our digital controllers. The DP2696 or DP4896 are the
approved processor for use whit IBZA Series. The options vary depending on the final
application. Refer to DP2696 or DP4896 user manual.

You may obtain the settings from the DP Series at

1.5.2 Amplification

To power IBZA Series, Tecnare recommends amplifiers with the power ratings enough
to feed the loudspeakers. For high power or live applications, it is recommended to
oversize the amplifiers relative to the nominal AES output of the loudspeakers. A lower
power amplifier will not reduce the chances of driver damage due to over-excursion,
and may actually increase the risk of thermal damage due to sustained clipping.

In certain specific cases it is possible to slightly under-power the subs or loudspeakers
as long as the amplifier will not be driven to its limits.

In any case, the Tecnare processors should be deployed in front of the amp to ensure
that the amplifiers to not go into clip.

The TSeries amplifier or DP4896 processors also include:

- Virtual Xover Limiter for passive systems

http://www.tecnare.com

website

- Thermal protection from power surges or overload

- Xmax Excursion displacement protection

The T10-44/T6-44 and T-48 Series amplifier is the ideal companions for maximum
performance of the IBZA Series loudspeakers. These Advanced System Amplifiers controlled
with DSP offer a complete both preset and protection solution for any application.

IBZA Series | rev.

2.50

10

Operation Manual

Frequency Range (+/- 6dB)

2 Loudspeaker Configuration

2.1 Point Source

In this configuration the system operates over the nominal frequency range of the
enclosure.

IBZA6 enclosure is driven by the PA4.450, PA900 amplifier with the DP Series Processor or
T-44/T-48 Series amplifier controller both with factory preset.

IBZA6 Standalone mode

82- 20Hz

2.2 Point Source with low-frequency element

In this configuration, the frequency response of the IBZA6 is extended in the low end.

IBZA6 enclosure is driven by the PA4.450, PA900 amplifier with the DP Series Processor or
T-44/T-48 Series amplifier controller both with same factory preset as in point source
configuration. The subwoofer will be operating with its corresponding factory preset. The upper
frequency limit must be 110 Hz for an optimal acoustic coupling with the enclosure.

If your IBZA6 loudspeakers and subwoofers are separated by a greater distance - or delay
must be used between them - a measurement system such as SMAART should be used to
determine the correct delay and polarity.

IBZA Series | rev.

2.00

11

Operation Manual

Frequency Range (+/- 6dB)

40- 20Hz

Recommended ratio

1xSW-118M: 4xIBZA6

IBZA6 + SW-118M

IBZA Series | rev.

2.50

12

Operation Manual

3 Configuration

Tecnare® Sound Systems recommended operating the IBZA6 loudspeaker together
Tecnare loudspeaker controllers.

Tecnare
a risk of damaging the loudspeaker components. DP Series Loudspeaker Controller, PA Series
amplifier and T-Series amplifier are ideal for this purpose.

Ensure that the right preset was selected before connecting the loudspeaker with the
amplifier.

Operating with an incorrect preset can damage part of the loudspeaker.

Ensure that the amplifier is properly size according to requirements. Under-power or
oversize power amplifier without the supervision of an expert may damage the loudspeaker.

Please note the technical specification section.

®

only recommends using preset/amplifier developed by Tecnare; otherwise there is

3.1 Connection to PA4.450

MAXIMUM OF 4 ENCLOSURES PER PA4.450

2 x IBZA6 can be connected to each output channel on the PA4.450. Therefore, a single
PA4.450 amplifier controller can drive up to 8 enclosures.

Impedance load: 8Ω for 1 enclosure, 4Ω for 2 enclosures.

IBZA Series | rev.

2.00

13

Operation Manual

3.2 Connection to PA900

MAXIMUM OF 4 ENCLOSURES PER PA900

2 x IBZA6 can be connected to each output channel on the PA900. Therefore, a single
PA900 amplifier controller can drive up to 4 enclosures.

Impedance load: 8Ω for 1 enclosure, 4Ω for 2 enclosures.

3.3 Connection to T-44 Series

MAXIMUM OF 16 ENCLOSURES PER T-44.

4 x IBZA6 can be connected to each output channel on the T-44/T-48 Series amplifier.
Therefore, a single T-44 amplifier controller can drive up to 16 enclosures. A single T-48
amplifier controller can driven 32 enclosures

Impedance load: 8Ω for 1 enclosure, 4Ω for 2 enclosures, 2Ω for 4 enclosures.

T-44 Series Amplifie

IBZA Series | rev.

2.50

14

Operation Manual

4 Integrating IBZA6 Using Subwoofers

4.1 Integrating IBZA6 Loudspeakers Systems with Tecnare Subwoofers

An IBZA6 loudspeaker system can be deployed in combination with Tecnare's subwoofers

likes a SW-12, SW115, SW118M. These subwoofers can achieve very low frequency response
extending system response appreciably and increasing the overall acoustic power of a system
in the lowest frequencies.

The ideal ratio of IBZA6 loudspeakers to subwoofers depends on the configuration of the

system, the application, and the frequency content of the signal being reproduced.

For most application, a ratio of two IBZA6 for each SW-12 subwoofer and four IBZA6 for

each SW115 or SW-118M subwoofer yield good results in frequency response and headroom.

4.2 Signal Delay

If IBZAs loudspeaker and subwoofers are used in their full-range configuration together DP­Series Loudspeaker controlled or T-Series Amplifier, use the factory preset setting if they are
co-planar or near to each other.

For other configuration or if they are separated by a great distance it will usually be
necessary to determine the signal delay and polarity setting with a measurement system such
as SMAART audio analyzer.

NOTE: If the subwoofer’s amplifier/DSP Limit LED begins to light before
reaching the required SPL, consider adding more subwoofers to meet the
SPL requirements without exposing the drivers to excessive heat and
excursion.

IBZA Series | rev.

2.00

15

82Hz -20 kHz±3dB, measured on axis. 95Hz-18kHz Recommended operating frequency range.
Response depends on loading conditions and room acoustics

Low Frequency

1 x 6-inch cone driver ferrite magnets, direct radiation, bass-reflex

signal (6 dB crest factor).

High Frequency

1 x 1-inch dome tweeter on symmetric horn

signal (6 dB crest factor).

5 Technical specifications

IBZA6 FULL-RANGE COMPACT LOUDSPEAKER SPECIFICATIONS

ACOUSTICAL

Operating Frequency Range

Axial Sensitivity 93 dB (1w/1m)

Calculated SP L 116 dB continuous/122 Peak

Nominal Dispersion 80º Axis-symmetric

Power Handling 200 W AES / 400 Continuous

COMPONENTS

Nominal impedance: 8Ω
Voice coil size: 1.46-inch
Power Handling Capability: 170 W AES / 340 W continuous
Note: Power Handling measured using AES Standards= 2 hours test made with continuous pink noise

Nominal impedance: 8Ω
Voice coil size: 1-inch
Power Handling Capability: 30 W AES / 60 W continuous
Note: Power Handling measured using AES Standards= 2 hours test made with continuous pink noise

Technical Specifications

AUDIO INPUT

Connectors IN: 1 x NL4 SpeakON® LINK: 1 x NL4 SpeakON®

Wiring Pin 1+/-: Input Signal ; Pin 2+/- : Parallel

PHYSICAL

Enclosure 16mm birch plywood. Finished in Polyurea surface.

Protective Grille Powder-coated perforated steel with acoustically transparent reticulated foam

Rigging 2 x M6 insert for TUB-6 U-Bracket

Dimensions (HxWxD) 330mm x 215mm x 207mm (13.07” x 8.46” x 8.11”)

Weight 4,5 Kg. (14.10 lbs)

Custom finish White code available on request W ithout charge. RAL code on special order.

Application information is presented for guidance only. Exel Acoustics SL reserves the right to make any necessary
changes to the products and the published specifications. As part of the ongoing development program Exel Acoustics
SL tries to maintain the highest degree of product compatibility.

16 IBZA Series | rev.

2.50

Operation Manual

IBZA6 Dimensions

17 IBZA Series | rev.

2.50

Operation Manual

IBZA Series | rev.

2.50

18

Operation Manual

Reinventing The Rules

©2016

Tecnare Sound Systems. All rights reserved.
IBZA6 Operation manual

The contents of this manual are furnished for informational purposes only, are subject to change without notice, and
should not be construed as a commitment by Exel Acoustics SL. Exel Acoustics assumes no responsibility or liability for
any errors or inaccuracies that may appear in this manual. Except as permitted by applicable copyright law, no part of
this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, recording or otherwise, without prior written permission from Exel Acoustics. Tecnare and PCC-Net are
trademarks of Exel Acoustics SL. Podware, System Engineer, BvNet, Smaart and all third-party trademarks mentioned
herein are the property of their respective trademark holders.

Printed in Spain.

19 IBZA Series | rev.

2.50

EXEL ACOUSTICS SL

CL Encinar, 282 - Pol. Ind. Monte Boyal
45950 Casarrubios del Monte (To)
Spain
(e) [e-mail]

www.tecnare.com - www.facebok.com/tecnare
(T): [phone] - [phone]
(F): [phone]

rev.:2.50 2018