Pairing Method
Mak e sure the distance between the keyboard and the PC is within 3M.
Plug the Nano receiver into USB port of the PC and turn on the keyboard.
The blue "Power" LED will be on and red "Power" LED will flash for 1-2
seconds and turn off. Now the pairing is successful.
Note: If the red indicator only flashes one time then turns off, the pairing
is unsuccessful. Press "Esc" + "K" to re-connect.
Numeric Zone
Press the "Num Lock" button, the LED of "Num" will turn on. Letter "M",
"J", "K", "L", "U", "I", "O" are changed to numeric 1, 2, 3, 4, 5, 6, 7, 8, 9.
Press "FN" + "F11" again, the LED of "Num" will turn off. Numeric 1, 2, 3,
4, 5, 6, 7, 8, 9 are changed to letter "M", "J", "K", "L", "U", "I", "O".
Energy Saving Mode
1. When the keyboard is not used for 10 minutes, it will enter dormant.
Press any key to act ive.
2. Press and hold any key for 2 minutes, the keyboard will enter
dormant. Press any key to active.
IMPORTANT SAFETY IN STRUCTIONS-CAREFULLY FOLLOW
THESE INSTRUCTIONS.
1.SAVE THESE INST RUCT IONS - This sheet co n t ains important safety
and operating instructions.
2.Before using the product, read all instructions and caution markings on
the product, acc essori es and device using our pro duc t .
3.Thi s appli anc e is not intended for use by persons (incl uding children) with
reduced physical, sensory or ment al capabi lities, or lack of experienc e and
knowledge, unles s they have been given supervisi on or instruction concer ning
use of the appliance by a person responsible for their safety.
4.Children should be supervised to ensure that they do not play with
the appliance.
5.Keep the product away from fire or explosion may occur.
6.For indoor use onl y. Do not expose to r ain, water, excess moistur e or snow. 7.Do
not place product in or near inflammabl e, explosive or hazardous object . 8.Do not
place in or near water , rain, excess moisture or extreme heat.
9.Do not operate product with damaged cord or plug.
10.Do not operate product if it has been damaged in any way.
11.Do not di sassem ble the product. Disassembl y m ay result in a risk of s afety
hazards.
5