Page 1
TeckNet X373 Bluetooth Keyboard
Note:
German and French language user manuals can be downloaded
from our website: www.tecknet.co.uk.
Page 2
Welcome
Thank you for choosing this TeckNet product. To ensure optimum
performance and safety, please read these instructions carefully before
operating this product. It is strongly recommended you keep this manual for
future reference.
Product Layout
Product Specifications
Interface: Bluetooth 3.0 interface standard
Operating Distance: 10 M
Modulating System: GFSK
Keyboard Size: 240 x 175 x 7.5mm
Operating Voltage: 3.0-4.2V
Operation Current: <2.5mA
Standby Current: 0.3mA
Sleeping Current: <40uA
Charging Current: >200uA
Standby Time: >100 days
Charging Time: <2 hours
Battery Capacity: 500mA
Continuous Working Time: 100 hours
Lithium Battery Life: 3years
Key Strength: 50g~80g
Key Life: <3 million strokes
Operating Temperature: -10-+55º C
01
Page 3
Package Contents
1 x X373 Bluetooth Keyboard
1 x Micro-USB Cable
1 x User Manual
1 x Warranty Card
Operation Instructions
FN+FKeys
These provide shortcuts to useful functions. Firstly, press and hold theFN
key, then press the "F" key you want to use. Press and hold "FN" and
combination media keys will simplify computer operation.
Function Keys
Note: The functions of combination key may be different due to different
keyboard version.
+
↑+→
+
←
Home
Decrease
brightness
Increase
brightness
Paste
Play/Pause
Volume
Down
Select all
Copy
Page down+
↓
+C
+v
+A
Previous
Track
Mute
Lock
Switch
language
End
Copy
Language
Exchange
Next Track
Volume Up
Paste
Page up
Home
Virtual
Keyboard
02
Page 4
Bluetooth Pairing
1.Turn on the keyboard “On/Off” switch, the "Status" indicator will illuminate for
4 seconds before it turns off.
2.Press the “Connect” button, the Bluetooth indicator will start flashing. Now
the keyboard is ready for pairing.
3.Access to the settings and click on “Bluetooth” to turn on the connection.
The tablet PC will automatically search for a Bluetooth-enabled device.
When the wireless keyboard is searched, click on the device name
“TeckNetX373” to connect.
4.Enter the password shown on tablet screen and click "Enter" on the X373.
5.When the wireless keyboard is successfully connected, the Bluetooth
indicator will turn off.
Keyboard Indicators
1)Status indicator:
• It will show blue light and illuminate for 5 seconds when you turn on the
keyboard.
• It will show blue light and flash about 3 minutes for paring; the light will turn
off if the pairing is complete or no available device for pairing.
2)Power indicator:
• It will show blue light and keep flashing if the voltageis less than 3.3V.
• It will show red light when charging the keyboard; the light will turn off when
it’s completed.
Battery Life
The rechargeable battery can last for several weeks. With no memory effect,
the lithium battery can be charged at any time. In order to extend service life,
we recommend you turn the keyboard off when it’s not in use for a long time.
Battery Charging
Turn on the Bluetooth keyboard. If the “Status” indicator shows green, it
means the battery has enough power. If the “Status” indicator shows red, it
means the battery needs to be charged and please follow the steps below.
1.Plug the Micro-USB charging cable into the keyboard.
2.Plug the USB end into an empty port of your computer or a power adapter.
3.Charge for about 2 hours or until the battery status light turns off.
Note:For other Bluetooth enabled devices, please verify the Bluetooth
standard & compatibility before attempting to connect to the keyboard.
03
Page 5
Energy-Saving Sleep Mode
The keyboard’s long-life battery lasts for several weeks of normal use. The
keyboard will go into sleep mode if left on and not being used. Press any
key and wait a second or two to wake it up.
Cleaning
Clean the keyboard with a damp cloth moistened with water, alcohol or
alcohol based disinfectant.
Troubleshooting
Unable to connect
1)Make sure the keyboard is on (the power indicator light will be on).
2)Make sure the keyboard is in operating distance (within 10 metres).
3)Check that the battery isworking (if the power indicator is red when
keyboard is connected to a power source, the battery needs to recharge).
4)Make sure the Bluetooth setting on the tablet computer is turned on.
5)Press the “Connect” button to check the Bluetooth status.
Unable to charge the keyboard
1)Make sure the USB power cable is connected properly to the keyboard
and the power source.
2)Make sure the wall charger is plug into the power outlet.
Note: The output voltage and current of the power adapter must not exceed
DC 5.0V, 500mA. Otherwise, the keyboardwill be damaged.
Disposal of waste batteries
Insert a flat-head screwdriver between the keyboard’s plastic top and metal
case, prize the plastic top open and remove it completely. This action
destroys keyboard by separating the battery from circuit board. It is your
responsibility to hand the battery over to an appropriate collection and
recycling center to help to conserve natural resources and prevent potential
negative consequences for human health and the environment, due to the
possible presence of hazardous chemicals in batteries and electronic
equipment.
04
Page 6
Warning
1.Keep the item away from sharp objects.
2.Do not place heavy object on the keyboard.
3.Keep away from microwave items.
4.Do not force or distort the keyboard.
5.Keep away from oil, chemical or other organic liquid items.
Disclaimer
Every effort has been made to ensure that the information and procedures in
this guide are accurate and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make any changes without
further notice to any products mentioned herein.
Warranty
We warrant that products purchased from authorised distributors will meet
the applicable product specifications and be free from all defects in design,
assembly, materials and workmanship. Please contact TECKNET retailers,
or visit our website(www.tecknet.co.uk) for more information about the
product.
05
Loading...