Page 1
TeckNet U502 5-Port USB Charger
Note:
German and French language user manuals can be downloaded
from our website: www.tecknet.co.uk.
Page 2
Welcome
Thank you for choosing this TECKNET product. To ensure optimum
performance and safety, please read these instructions carefully before
operating this product. It is strongly recommended you keep this manual for
future reference.
The TeckNet U502 is a 5-Port USB charger with BLUETEK technology,
which is the ideal solution for simultaneously charging of up to 5 devices
such as smartphones, tablets and almost any USB powered devices while
being connected to only one AC power socket.
Product Layout
SKU: U502-EU
Input: AC 100-240V 50/60Hz 1.1A
Output: Total USB 5V/8.0A(Max)
Each BLUETEK 5V/2.4A
BULK: YXO296
Manufacturer's SKU : ASSA58
ACPlug
AC Power Cord
(UK/UK/EU plug optional)
USB Output Port
LED Indicator
01
Page 3
Product Specification
• Product Name: TeckNet U502 BLUETEK USB Charger
• Material: High Grade ABS Plastic
• Input: 100~240V AC 50/60Hz
• Each USB Output: 5V/2.4A
• Total Output: 5V/8A
• Dimensions: 88 x 60 x 26mm
• Weight: 170g
• Certificates: ETL&CE&FCC&ROHS
Instructions
1 Connect the AC plug or AC Power Cord with the adapter, make sure both
connect firmly then insert the AC wall socket. Now the U502 is ready for
use.
2 Connect your iPad, mobile phone or any other electronic devices to U502
USB port and it will start charging the devices automatically. The
corresponding LED would lights up while charging.
3 To stop charging your devices, simply disconnect them from the U502.
Product Layout
1 x TeckNet U502 USB Charger
1 x AC Plug
1 x AC Power Cord
1 x User Manual
1 x BLUETEK Instruction
1 x Warranty Card
Compatibility
iPad, iPhone, iPod, Mobile Phones and all other digital devices requiring
charging through a DC 5.0V 0.1A-2.4A USB port (with smart IC function).
BLUETEK™ Technology identifies the compatibility of devices from Apple,
Samsung and many other brands to optimise USB power and enable faster
recharge rates of up to 2.4A saving you valuable time.
Note: The output current of the fourth, fifth USB would turn down to
5V/0.8Ato prevent overheat and extend the product life, because if U502 is
charging more than four devices, the total output current would be over 10A
for a while. When the first three USB output current decreased to 5V/6A,
then the last two USB would resume normally.
02
Page 4
Warning
Please read all instructions and warnings prior to using this product for the
first time. Failure to read and follow these safety and usage instructions
could result in fire, explosion, electric shock or other hazard that could
potentially cause property damage or even fatal injury.
1.Do not modify, disassemble, open, drop, crush, puncture or shred the
product.
2.Do not expose the product to water or excessive moisture.
3.Keep away from heat sources and direct sunlight to prevent heat build-up.
4.Keep away from high voltage devices.
5.This product is not a toy, keep away from children and ensure that all
persons who use the product read and follow these instructions and
warnings.
Disclaimer
Every effort has been made to ensure that the information and procedures in
this guide are accurate and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make any changes without
further notice to any products mentioned herein.
Warranty
We warrant that products purchased from authorized distributors will meet
the applicable product specifications and be free from all defects in design,
assembly, materials and workmanship. Please contact retailers or visit our
website(www.tecknet.co.uk)for more information.
03
Loading...