Tecknet iEP1200 User Manual

TeckNet iEP1200 Power Bank

TeckNet iEP1200

for iPhone 3G/3G S, 4G/4G S, 5G/5G S/5G C

TeckNet iEP1200 Power Bank

User Manual

Descriptions

（1）LED Power Indicator （2）Power Switch Button
（3）USB Output Port 1 （4）USB Output Port 2
（5）Micro USB input Port （6）USB to Micro USB Cable

1

Welcome

Thank you for choosing this product. To ensure optimum performance
and safety, please read these instructions carefully before operating the
product. It is strongly recommended you keep the manual for future
reference.

6

Specifications

Product Name: TeckNet iEP1200 USB Power Bank Battery
Type: Li-ion Battery Capacity: 12000mAh
Input: DC 5.0V, 1.2A max Port 1 Output: DC 5.0V/1 .0A
Port 2 Output: DC 5.0V/2.1A

Using your iEP1200 Power Bank

1. Charging the power bank

You can use the included USB-Micro USB cable to charge the iEP1200
Power Bank from a USB power source.
Note:
While the iEP1200 Power Bank is being charged, the blue LED
indicators will flash. Once the Power Bank is fully charged, all LEDs will
light up and the Power Bank will stop charging. Then, simply disconnect
from its power source, and you power bank is now ready for use.
The Power Bank will not provide power output during the charging
period.

2. Recharging Your Mobile Device

Connect your iPad, mobile phone or any electronic device compatible
with this Power Bank. Press the power switch to start charging your
device.
To stop charging your device, simply disconnect it from the Power Bank.
The power output will remain on for 45 seconds and will stop
automatically if the Power Bank does not start to charge a device within
this period.

Compatibility

iPad, Mobile Phones, iPhone, iPod, more than 85% of Samsung Galaxy
Tablets, and all other digital devices requiring charging through a DC 5.0V
1A or DC 5.0V 2.1A USB port.

Note:

Your original USB data cable might not be suitable for use with this Power
Bank to re-charge your device. Please use the supplied USB to Micro USB
cable.

2

Battery Capacity Indicator & LED Light Switch Button

The LED power indicators provide information about the battery
charging status and battery power level: Press the Power Switch
Button, the LED light will also indicate the power level as follows:

1 LED Flashes: <10% Power (power level is lower than 10%, the
LED keeps on flashing automatically)
1 LED on: 10%-25%
2 LEDs on: 26%-50%
3 LEDs on: 51%-75%
4 LEDs on: 76%-100%

It takes around 10 hours to fully charge this Power Bank via a USB
power source (5V 1.2A)

Note:

The 2 USB ports can provide power output simultaneously with 5V 1A
power output on USB Port 1 and 5V 2.1A power output on USB Port 2.

Maintenance

In order to maximize the battery life, please maintain your iEP1200
Power Bank as recommended below:

1. Re-charge your iEP1200 Power Bank once every three months if it
has not been in use.

2. Keep your iEP1200 Power Bank dry and away from moist or corrosive
materials.

3. Do not wash the iEP1200 Power Bank with harsh chemicals, soaps or
detergents

3

1. Do not modify, disassemble, open, drop, crush, puncture or shred the
product.

2. Do not expose the product to water or excessive moisture.

3. Keep away from heat sources or direct sunlight to prevent heat
build-up.

4. Keep away from high voltage devices.

5. This product is not a toy, keep away from children and ensure that
anyone who uses the product reads and follows these instructions and
warnings.

6. Please do not try to charge your device when you are charging the
power bank.

Warning

Please read all instructions and warnings prior to using this product for
the first time. Failure to read and follow these safety and user instructions
could result in fire, explosion, electric shock or other hazard that could
potentially cause property damage or even fatal injury.

Package Contents

• iEP1200 Power Bank x1

• USB Cable x1

• User Manual x1

4