Tecknet GM299 Instructions Manual

TeckNet GM299 wired Gaming Mouse

Welcome

Thank you for purchasing this TeckNet product. To ensure optimum
performance and safety, please read these instructions carefully before
operating the product. It is strongly recommended you keep the manual
for future reference.

Product Layout

01

Technical Specifications

Button Count: 8 buttons
Resolution: 1000(red)/2000(blue)/3000(cyan)/4000DPI(purple),

500-4000DPI by software

Interface: USB version 2.0
Operating Voltage: 5V
Operating Current: ≤100mA
Weight Tuning Set: 6pcs, 5g/pcs, total 30g
LED Color: Red, Green, Bl ue, Yellow, Purple, Cyan, White

LED Brightness Mode: Spectral pattern, Fixed color breath, Multi-colors

breath, Permanent

LED Brea th Ti m e : 4-8s adjustable i nt ervals
Macro Settings: incal c ulable macro settings and up to 200 butt on

events for each macro

Cable Length: 1.5m
Dimensions: 126 x 70 x 39mm
Weight: 150g

Package Contents

1 x TeckNet GM299 Gaming Mouse
1 x User Manual
1 x Warranty Card
1 x CD Driver

System Requirements

To use this mouse, your computer must meet the following hardware
requirem ents and run one of the operating systems listed below.

Hardware

• PC with a Pe nti um pr ocessor or equivale nt AMD proc essors

• USB 2.0

Operation System

Window s 98 /ME/2000/XP/VISTA/Windows7/Windows8/WIN10
Note: The scroll wheel only works under the operating systems listed

above. If you use the mouse under a different operating system, the
mouse may either not work or lose its enhanced features.

02

DPI Switch

The mouse supports 1000/2000/ 3000/4000DPI( 500-4000DPI by software). To
switch to either setting, press the DPI button. The default setting is 1000 DPI .
Click the "DP I +" button on the top of the mouse once to upgrade the DPI, LED
light would change. Click the "DPI -" button on the top of the mouse once to
downgrade the DPI, LED light would change.

TeckNet GM299 Software Instructions
Installation:

1. Connect to your PC, insert disc and double click the software icon,
select a language.

2. Press “Next Step”.

03

3. Select "I accept the terms of the License Agreement" then click "Next"
to Install.

04

4. Click "Finish" to complete installation.

5. Double click the software icon after installation is completed. The
main interface as below shown. You can change the language by
click the s etting button on the top right corner.

05

Button Setting

Mouse button: Left button, Right button, Middle button, Forward
butto n, Bac kward button.
Gaming setting: Fire button, Combined button, Macro button.
Media and Website: Favorite, Search, Refresh, Stop, Forward, Backward,
My Computer, Player, Play/Pause, Stop, Vol+, Vol-, Last, Next, Mute,
Home Page, Calculator.
DPI setting: DPI +, DPI­Window s Functi ons : Win 8 Charm Menu
Windows Shortcut key: Cut, Copy, Paste, revoke, Select All,

Search, New-built, Print, Save, enlarge, reduce

Examples
Single Key setting

1). If you would like to set up for “Right Button”, click it first and a drop­down me nu wil l show up as below.

06

2) Then click "Single Key", input the key you need, click "OK" to save
the setting, then click "Apply", "OK" before exiting the software.

Mouse Function Setting

1) If you would like to set up mouse function for “Right Button”, click it
first an d a dr op-d ow n me nu wi ll sh ow up as below.

07

2) Then click "Mouse Function", select the function you need, click "OK"
to save the setting, then click "Apply", "OK" before exiting the software.

Macro Setting

1) If you would like to set up macro for “Right Button”, click it first a nd
a drop-down menu will show up as below.

08

2) Then click "Macro", select the pre-set macro you need, click "OK" to
save the setting, then click "Apply", "OK" before exiting the software.

Note: Macro must be pre-set be for e us e thi s f unc t ion.

3) You can select one type as you need under the drop-down menu at this

step. click "OK" to save the setting, then click "Apply", "OK" be for e
exiting the software.

09

Switch Profile Setting
TeckNet GM299 gaming mouse offers three profiles.

1) If you would lik e t o swit c h for “Right Button”, click it first and a drop-

down me nu wil l show up as below.

2) Select profile you need, click "OK" to save the setting, then click

"Apply", "OK" be for e ex i ti n g the s o ft war e.

10

Run Program

1) If you would like to set "Right Button" as "run program", click
"Right Button" first and a drop-down menu will show up as below.

2) Then click "Run Program", a pop-up window as below, select the
program you need, then click "Open", at last click "Apply", "OK" before
exiting the software.

11

Multimedia Setting

1) If you would like to set "Right Button" as "run program", click
"Right Button" first and a drop-down menu will show up as below.

2) Select the action you need, click "OK", then click "Apply", "OK"
before exiting the software.

12

Window s Su per F unction

1) If you would like to set "Right Button" as "Windows Super Function ",
clic k "R ight But t o n" firs t and a drop-d ow n m en u will show up as below.

2) Then a po p-up window as below show, select the action you need, click
"OK", then click "Apply", "OK" before exiting the software.

13

Windows Hot-Key Setting

1) If you would like to set "Right Button" as "Windows hot-key ", click
"Right Button" first and a drop-down menu will show up as below. Select
"Windows Hot-Key".

2) A pop-up window as below shown, select the hot-key you need, click
"OK", then click "Apply", "OK" before exiting the software.

14

Combo Key Setting

1) If you would like to set "Right Button" as "Combo Key", click "Right
Button" fi r st and a dro p-down menu will show up as below. Select
"Com bo Key" .

2) A pop-up window as below shown, i nput the combo key as you need, click

"OK", then click "Apply", "OK" before exiting the software.
Note: Combo key should be "Shift" or "Window" or "Ctrl" or "Alt" +

normal lett er or num b er .

15

Forbidden

If you would like to set "Ri ght Butt on" as for bidden key, simply clic k "Right
button", Select "Forbidden", the right button now is forbidden for usage.

USB Report Rate and DPI Settings

You can change the USB report r ate and DPI setting simply in below section.

Profile Setting

TeckNet GM289 offers three profile for user, you can set the profiles as
you need, then click "Apply", "OK" before exiting software.

16

Macro Setting

Click "Macro Setting", a pop-up window as below shown.

1) Creat a new macro, input the macro name in the box under "New
macro", then click "New". The macro name would be shown on the list of
"Select name".

You can delete the macro, re-name, export, import the macro through
below button:

2) Click "Start" to set up the macro. Input the keys needed and cli c k to sav e.

17

Note: Software support endless macro, each macro support 200
actio ns, inc l u di ng button down, butto n up action.

3) You can modify or delete, clear the macro action by below buttons
: Select a action, then click this button, the caption action would

be moved to to the top.

: Select a action, then click this button, the caption action would

be moved to to upper layer.
: Select a action, then click this button, the caption action would
be moved to to next layer.

: Select a action, then click this button, the caption action would

be moved to to the last layer.

: Select a action, then click this button, the caption action would

be deleted.

: Click this but to n, all the action would be delet ed.

4) You can insert script command or mouse event, or relative coordinate

and adjust fixed delay , loop count after stopping record. Click "OK" to
save the macro, and click "Apply", "OK" before exiting the software.

18

LED Setting

1) Click the c hec k box of "Light", LED would be forbiden.

2)Select t he LE D mode fr om the dr op-down menu.

3) Adjust the brightness and the LED speed throught t he tool bar.

19

Default Setting
Simply click "Default Setting" button, all the user-defined settin g
are cha ng ed to de f a ul t s etting.
Advance Setting
You can adjust the mouse move speed, scroll speed, click speed, and lift-

off Dist ance by adju s ti n g the t o ol bar. Click "Apply", "OK" before exiting
the software.

Uninstallation:
Open the cont r ol panel and click "Pr oc e dures and Functi ons " .

Select "TeckNetGamingMouse" and double click to uninstall.

20

Attention

1. Any attempt to disassemble, adjust or repair the mouse may result

in expos ur e an d ot h er safety hazards.

2. If not used, the mouse will drop into auto-sleeping mode within 3

seconds, press any key or scroll wheel to activate the mouse.

3. Do not use the mouse on a glass or mirrored surface, as these surfaces

will cause the mouse to fail temporarily.

4. The mouse might not work smoothly on some special surfaces, such

as smooth, dark or black, reflecting and 3D mouse pads surfaces.

5. Please avoid using the mouse on a metal surface. Metals, such as iron,

aluminium or copper, shield the radio frequency transmission and may
slow dow n th e mo us e pr esenter ’s response time or cause the mouse to
fail temporarily.

IMPORTANT SAFETY INSTRUCTI ONS-CAREFULLY FOLLOW
THESE INSTRUCTIONS.

1.SAVE THESE INSTRUCT IONS - This sheet contains important safety
and operating instructions.

2.Before using the product, read all instructions and caution markings on
the product, accessor ies an d dev i c e us i ng our pro duct.

3.Thi s appli anc e is not intended for use by persons (incl uding children) with
reduced physical, sensory or ment al capabi lities, or lack of experienc e and
knowledge, unl es s they have been given supervision or instruction conc er ning
use of the appliance by a person responsible for their safety.

4.Children should be supervised to ensure that they do not play with
the appliance.

5.Keep the product away from fire or explosion may occur.

6.For indoor use onl y. Do not expose to r ain, water, excess moistur e or snow. 7.Do

not place product in or near inflammabl e, explosive or hazardous object. 8.Do not
place in or near water, rain, excess moisture or extr eme heat.

9.Do not operate product with damaged cord or plug.

10.Do not operate product if it has been damaged in any way.

11.Do not disassemble the product. Disassembly may result in a risk of
safety hazards.

12.Do not throw or shake the product

13.To reduce the risk of electric shock, unplug the product from the
power supply when not in use or switch off the power supply

21

Limited 18-Month Warra nty:

What this warranty covers.

Shenzhen Unchain Technology Co., LTD. (Manuf acturer: “Unchain” ) warrants
to the original purchaser of this Teck Net produc t that the product shall be free
of defect s i n design, assembly, material, or workm anshi p.

What the period of coverage is.

Unchain warrants the TeckNet product for 18 Months.

What will we do to correct problems?

Unchain will repair or replace, at its option, any defective product free
of charge (except for shipping charges for the product).

What is not covered by this warranty?

All above warranties are null and void if the TeckNet product is not
provid ed t o U nch ai n for i ns p ect ion upon Unchain’s request at the sole
expense of the purchaser, or if Unchain determines that the TeckNet
product has been improperly installed, altered in any way, or tampered
with. The TeckNet Product Warranty does not protect against acts of God
such as flood, earthquake, lightning, war, vandalism, theft, normal-use
wear and tear, erosion, depletion, obsolescence, abuse, damage due to
low voltage disturbances (i.e. brownouts or sags), non-authorized
program, or system equipment modification or alteration.

How to claim the warranty

Please contact retailers or visit TeckNet website www.tecknet.co.uk for
more information

Disclaimer

Every e f for t has be en mad e to ensure that the in fo r m ati on an d pr ocedures
in this guide are accurate and complete, no liability can be accepted for
any errors or omissions and we reserve the right to make any changes
without further notice to any products mentioned herein.

Warranty

We warrant that products purchased from authorized distributors will
meet the applicable product specif ications and be free from all defects in
design, assembly, materials and workmanship. Please contact retailers
or visit our website www.tecknet.co.uk for more information.

21

TeckNet
P.O. BOX
122 Liverpool

L9 7 WQ
www.tecknet.co.uk