Tecknet BLUETEK iEP360 User Manual

TeckNet BLUETEK™ iEP360

for iPhone 3G/3G S, 4G/4G S, 5G/5G S/5G C, 6G，6G plus

BLUETEK™ iEP360 Power Bank

BLUETEK™ iEP360 Power Bank

User Manual

Descriptions

（1）LED Power Indicator
（2）Switch Button
（3）USB Output Port
（4）Micro USB Input Port
（5）LED Torch
（6）USB to Micro USB Cable

1

Welcome

Thank you for purchasing this product. To ensure optimum performance
and safety, please read these instructions carefully before operating the
product. It is strongly recommended you keep the manual for future
reference.

6

Specifications

Product name: BLUETEK™ iEP360 USB Power Bank
Battery type: Li-Ion battery Capacity: 6400mAh
Input: DC 5.0V, 1.0A max Output: DC 5.0V 2.4A

2

Using your BLUETEK™ iEP360 Power Bank

1. Charging the power bank

You can use the provided “USB to Micro USB cable” to charge the
BLUETEK™ iEP360 Power Bank from a USB power source It takes
around 7 hours to fully charge this Power Bank via a USB power source
（5V 1A).

Note: While the BLUETEK™ iEP360 Power Bank is being charged,
the blue LEDs will flash. Once the Power Bank is fully charged,
all LEDs will light up and the Power Bank will stop charging.
Disconnected from its power source, and your power bank is ready
for charging now. The Power Bank can provide power output during
charging period.

Compatibility

iPad, Mobile Phones, iPhone, iPod, and all other digital devices
requiring charging through a DC 5.0V 0.1A-2.4A USB port. LG Grade A battery
cells and premium chips ensure reliability and safety. Include smart IC function.

BLUETEK™ Technology identifies the compatibility of devices from
Apple, Samsung and many other brands to optimise USB power and
enable faster recharge rates of up to 2.4A saving you valuable time.

Battery Capacity Indicator & LED Light Switch Button

The LED power indicators provide information about the battery
charging status and battery power level:
Press the “switch button” to check power level, the LEDs will
illuminate for 30~50 seconds.

LEDs indicate:
1 LED Flashes: <20% Power 1 LED on: 20%Power
2 LED on: 40% Power 3 LED on: 60% Power
4 LED on: 80% Power 5 LED on: 100% Power

LED Torch

There is a LED Torch located at the front of the Power Bank.
To switch it on, short press the Switch Button twice; and to switch it
off, short press the Switch Button twice again.

Maintenance

In order to maximize the battery life, please maintain your BLUETEK
™ iEP360 Power Bank as recommended below:

1. Re-charge your BLUETEK™ iEP360 Power Bank once every
three months if it has not been in use.

2. Keep your BLUETEK™ iEP360 Power Bank dry and away from
moist or corrosive materials.

3

2. Recharging your devices

There is an on/off power switch on the BLUETEK™ iEP360
Power Bank. Upon Pressing the “switch button” and the “LED
power indicator” will illuminate for 2 to 3 seconds. After that, the
Power Bank will start charging your devices. To stop charging
your device, simply disconnect the device from the BLUETEK™
iEP360 Power Bank. The power output will remain for 30-35 seconds
and automatically switch off if the Power Bank is not connected
with any device within this period.

Package Contents

- 1 X BLUETEK™ iEP360 Power Bank

- 1 X USB Cable

- 1 X User Manual

4

Warning

Please read all instructions and warnings prior to using this product for the first
time. Failure to read and follow these safety and usage instructions could result
in fire, explosion, electric shock or other hazard that could potentially cause
property damage or even fatal injury.

1. Do not modify, disassemble, open, drop, crush, puncture or shred the product.

2. Do not expose the product to water or excessive moisture.

3. Keep away from heat sources and direct sunlight to prevent heat build-up.

4. Keep away from high voltage devices.

5. This product is not a toy, keep away from children and ensure that all persons
who use the product read and follow these instructions and warnings.

6.

Do not wash the BLUETEK™ iEP360 Power Bank with harsh chemicals, soaps

detergents.