Tecknet BLUETEK iEP300 User Manual

BLUETEK™ iEP300 Power Bank

SKU: iEP300-BLACK

Thank you for purchasing this product. To ensure
optimum performance and safety, please read these
instructions carefully before operating the product. It
is strongly recommended you keep the manual for
future reference.

Welcome

1) ON/OFF/Operation Button

2) USB Output Port

3) Micro USB Input Port

4) LED Torch

5) USB to Micro USB Cable

Descriptions

Product Layout

Thank you for purchasing this product. To ensure
optimum performance and safety, please read these
instructions carefully before operating the product. It
is strongly recommended you keep the manual for
future reference.

Welcome

Product Name:BLUETEK™ iEP300 USB Power Bank
Battery Type: Li-Ion battery
Capacity: 3200mAh
Input: DC 5.0V, 1.0A max
Output: DC 5.0V, 1.0A max

BLUETEK™：
Features cutting-edge BLUETEK™ Technology.
BLUETEK™ Technology identifies and optimises USB
power compatibility of devices from Apple, Samsung
and many other devices.

Specifications

Mobile phones, iPhone, iPad, iPod, Samsung Galaxy
tablets and digital devices that recharge through a
USB port with DC 5.0V/1A.

Compatibility

You can use the included USB to Micro USB cable to
charge the iEP300 Power Bank from a USB adapter in
a mains power socket or USB socket in a PC.
Note: While the BLUETEK™ iEP300 Power Bank is
being charged, the red LED will either turn red, yellow
or green based on the battery capacity. Once the
power bank is fully charged, the green light will light
up. It takes about 4 hours.

Using your BLUETEK™ iEP300 Power Bank
Charging the Power Bank

Once your mobile device is connected to the
BLUETEK™ iEP 300 Power Bank, press the Switch
Button once, this will illuminate the LEDs for 5 to 7
seconds, and the Power Bank will start charging your
device, mobile phone or any electronic devices. To
stop charging your device, simply disconnect the
device from the BLUETEK™ iEP300 Power Bank.

Recharging your devices

1) ON/OFF/Operation Button

2) USB Output Port

3) Micro USB Input Port

4) LED Torch

5) USB to Micro USB Cable

Descriptions

Product Layout

1

Product Name:BLUETEK™ iEP300 USB Power Bank
Battery Type: Li-Ion battery
Capacity: 3200mAh
Input: DC 5.0V, 1.0A max
Output: DC 5.0V, 1.0A max

BLUETEK™：
Features cutting-edge BLUETEK™ Technology.
BLUETEK™ Technology identifies and optimises USB
power compatibility of devices from Apple, Samsung
and many other devices.

Specifications

The LED power indicators provide information about
the battery charging status and battery level: Press the
Switch Button once check power level, the LED will be
illuminated for 5 seconds.

Battery Capacity Indicator & LED Light Switch

The LED Torch is located at the top of the Power
Bank.
Double-click the button to turn the torch on.
Double-click again for the SOS mode - the torch emits
three long and three short SOS signals.
Double-Click a third time turns the torch off.

LED Torch

In order to maximize battery life, we recommend you
maintain the BLUETEK™ iEP300 Power Bank as
follows:

1. Re-charge your BLUETEK™ iEP300 Power Bank
once every 3 months if it has not been in use.

2. Keep your BLUETEK™ iEP300 Power Bank dry
and away from moist or corrosive materials.

3. Do not clean the BLUETEK™ iEP300 Power Bank
with harsh chemicals, soaps or detergents.

Maintenance

- 1 X BLUETEK™ iEP300 Power Bank

- 1 X USB Cable

- 1 X User Manual

- 1 X Lanyard

Package Contents

Mobile phones, iPhone, iPad, iPod, Samsung Galaxy
tablets and digital devices that recharge through a
USB port with DC 5.0V/1A.

Compatibility

You can use the included USB to Micro USB cable to
charge the iEP300 Power Bank from a USB adapter in
a mains power socket or USB socket in a PC.
Note: While the BLUETEK™ iEP300 Power Bank is
being charged, the red LED will either turn red, yellow
or green based on the battery capacity. Once the
power bank is fully charged, the green light will light
up. It takes about 4 hours.

Using your BLUETEK™ iEP300 Power Bank
Charging the Power Bank

Once your mobile device is connected to the
BLUETEK™ iEP 300 Power Bank, press the Switch
Button once, this will illuminate the LEDs for 5 to 7
seconds, and the Power Bank will start charging your
device, mobile phone or any electronic devices. To
stop charging your device, simply disconnect the
device from the BLUETEK™ iEP300 Power Bank.

Recharging your devices

2

The LED power indicators provide information about
the battery charging status and battery level: Press the
Switch Button once check power level, the LED will be
illuminated for 5 seconds.

Battery Capacity Indicator & LED Light Switch

Please read all instructions and warnings prior to
using this product for the first time. Failure to read and
follow these safety and usage instructions could result
in fire, explosion, electric shock or other hazard that
could potentially cause property damage or even fatal
injury.

1. Do not modify, disassemble, open, drop, crush,
puncture or shred the product.

2. Do not expose the product to water or excessive
moisture.

3. Keep away from heat sources and direct sunlight to
prevent heat build-up.

4. Keep away from high voltage devices.

5. This product is not a toy, keep away from children
and ensure that all persons who use the product
read and follow these instructions and warnings.

Warning

Every effort has been made to ensure that the
information and procedures in this guide are accurate
and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make
any changes without further notice to any products
mentioned herein.

Disclaimer

We warrant that products purchased from authorized
TeckNet distributors will meet the applicable product
specifications and be free from all defects in design,
assembly, materials and workmanship. Please contact
TeckNet retailers, or visit our website for more
information about the product.

Warranty

The LED Torch is located at the top of the Power
Bank.
Double-click the button to turn the torch on.
Double-click again for the SOS mode - the torch emits
three long and three short SOS signals.
Double-Click a third time turns the torch off.

LED Torch

In order to maximize battery life, we recommend you
maintain the BLUETEK™ iEP300 Power Bank as
follows:

1. Re-charge your BLUETEK™ iEP300 Power Bank
once every 3 months if it has not been in use.

2. Keep your BLUETEK™ iEP300 Power Bank dry
and away from moist or corrosive materials.

3. Do not clean the BLUETEK™ iEP300 Power Bank
with harsh chemicals, soaps or detergents.

Maintenance

- 1 X BLUETEK™ iEP300 Power Bank

- 1 X USB Cable

- 1 X User Manual

- 1 X Lanyard

Package Contents

Status of LED light Capacity percent

=100%
60-100%

30-60%

≤30%

The green light is illuminated
The green light flickers

The yellow light flickers
The red light flickers

3

Please read all instructions and warnings prior to
using this product for the first time. Failure to read and
follow these safety and usage instructions could result
in fire, explosion, electric shock or other hazard that
could potentially cause property damage or even fatal
injury.

1. Do not modify, disassemble, open, drop, crush,
puncture or shred the product.

2. Do not expose the product to water or excessive
moisture.

3. Keep away from heat sources and direct sunlight to
prevent heat build-up.

4. Keep away from high voltage devices.

5. This product is not a toy, keep away from children
and ensure that all persons who use the product
read and follow these instructions and warnings.

Warning

Every effort has been made to ensure that the
information and procedures in this guide are accurate
and complete, no liability can be accepted for any
errors or omissions and we reserve the right to make
any changes without further notice to any products
mentioned herein.

Disclaimer

We warrant that products purchased from authorized
TeckNet distributors will meet the applicable product
specifications and be free from all defects in design,
assembly, materials and workmanship. Please contact
TeckNet retailers, or visit our website for more
information about the product.

Warranty

4

Vielen Dank, für den Kauf dieses Produkts. Um die
optimale Leistung und Sicherheit zu gewährleisten,
lesen Sie diese Anleitung sorgfältig durch, bevor
Sie das Produkt in Betrieb nehmen. Es wird
dringend empfohlen, das Handbuch zur späteren
Einsichtnahme aufzubewahren.

Willkommen

Produktname:BLUETEK™ iEP300 USB Power Bank
Batterietyp: Li-Ionen Akku
Kapazität: 3200 mAh
Eingangsleistung: 5.0 V DC, 1.0 A max.
Ausgangsleistung:5.0 V DC, 1.0 A max.

Technische Angaben

1) AN/AUS-Taste / Betriebstaste

2) USB-Ausgang

3) Micro-USB-Eingang

4) LED-Taschenlampe

5) USB auf Micro-USB-Kabel

Beschreibungen

Produktansicht