TECHVIEW QM-3578 User Manual

1

17” LED Surveillance Monitor

QM-3578

User Manual

2

Box Contents:

1 x 17” LED Surveillance Monitor
1 x Power Cable
1 x HDMI Cable
1 x VGA Cable
1 x 3.5mm Audio Cable

Connection Diagram:

Please connect the monitor to the external device according to the following I/O interface list.

A. IEC Power Input
B. 3.5mm Audio Output
C. 3.5mm Audio Input
D. BNC Video Output
E. BNC Video Input
F. S-Video Input
G. VGA 15 Pin Input
H.HDMI Input

Main Menu:

Press the menu button on the bottom left of the screen, the main menu will be displayed on
the screen. The submenus of the main menu are: PC menu, Audio menu, Picture menu,
Function menu, OSD menu and Geometry menu.
Press the menu button to choose the submenus. The menu chosen will pop up with a dialog
box, press ▲▼ button to move among the secondary menus of the submenu.

3

A B C D E

A. “Source” button

 Press the button to display all the input channel menus of devices connected.

B. “Up” button

 Press the button to move the cursor up to the required function.
 Press the button to choose function in the OSD menu.

C. “Down” button

 Press the button to move the cursor down to the required function.
 Press the button to choose function in the OSD menu.

D. “Menu” button

 Press the button to display the OSD main menu.
 Choose an affirming button in OSD menu.

E. “Power” button

 Press the button to turn on or off the display.

PC Menu:

The PC menu can set contrast, brightness and colour temperature. Press the ▲▼ buttons to
move or press the menu button to confirm and exit.