TECHVIEW LA5597 Operation Manual

LA5597 IR Transmitter Operation Manual

- 1 -

LA5597- IR Transmitter

Operation Manual

LA5597 IR Transmitter can intelligent control home electrical IR device using in home
automation system which can connect wireless AM433Hz signals with wireless IR signals.
Through 5597 IR Transmitter, users can control all the devices which can use IR remote
controllers like TV, air c onditioner, electric curtain etc . Its wireless communic ation is stable, fast
and it does not need any wire. Installing it, you just need to bind relevant IR controlled devices. It
is very convenient.

1.0- System Featur e

• Learn two IR signal from any IR device (TV, air conditioner etc) and two wireless control

panel signal.

• Double color LED indicate learning status

• One learn mode and one test mode

2.0 – Location of components

• Do not site an IR Transmitter where its field of view may be obstructed (e.g. by curtains.)

• Ensure the IR signal of IR transmitter cover with IR electrical device(TV, air condition etc)

24°

LA5597 IR Transmitter Operation Manual

- 2 -

3.0 - PCB

Section 1 - Using IR T ransmitter

4.0 - How to register IR Electrical Device

i. To learn IR signal from IR remote control to LA5597 IR Transmitter

1. Signal A : Press the LEARN button 1 time, the LED becomes
Red indicating learn mode for IR signal A.

2. Signal B. Press the LEARN button 2 times, the LED becomes
Green indicating learn mode for IR signal B.

Note:

1. To complete the whole learn ing process of a signal once a time..

2. If no operation on the button system within 15 seconds will exit learn mode automatically.

ii. To register by pressing either key to be learnt on remote control of electrical device.

iii. The LED light off indicates IR signal had been learnt into the IR Transmitter and

exiting to normal mode.

Press LEARN
button 1 time

Red LED light

TEST BUTTON

LEARN BUTTON

IR Receiver

IR Transmission LED

Double color LED

Green LED light

Press LEARN
button 2 times

LA5597 IR Transmitter Operation Manual

- 3 -

4.1 - How to register Control Panel H

Set home automation controller entering to learning status as follow:

i. Set home automation controller entering to learning status as follow:

·System is in Day mode.

·Press [SET] to go into Program Mode

·When cursor is on SETUP character, press [SET] to go

into SETUP program mode

·Rotate [SET] to select Output Device.
Then press [SET] to go into Output Device function.

·Rotate [SET] to select Output 1

Note: Learning B IR Signal must to be selected other output device number.

Then press [SET] to go into setup output device 1 function.

·Rotate [SET] to select Device T ype.
Then press [SET] to go into Output Device Type function.

·LCD display current output device type
Rotate [SET] to select IR Signal type.

·Rotate [SET] to select A signal.

Note: Learning B IR Signal must to be selected B signal.

·Press [SET] to go to “Tx Learn Data”.

Note: Controller transmits learn data, ID save to Output device

OUTPUT DEVI CE

Output 1?

SETUP MENU

Output Device?

SETUP MENU

Setup System?

Output Device

Tx Learn Data?

Device T ype

IR Signal?

OUTPUT DEVI CE

Device T ype?

08:00 01- Jan

ACT INFO

SETUP

Home Automation Control Panel

POWER

[SET]

[ACTION]

[RESET]

08:00 01- Jan

DAY

IR Signal

A