25
For more information: 800-858-4043 - tsales@techspray.com MSDS / Specs: www.techspray.com
TECHCLEAN
®
WIPES
CLEANING TOOLS
2351 • 2352
TECHCLEAN ABSORBWIPE
™
For Sensitive Surfaces
Very soft and absorbent hydroentangled
polyester wipe for cleaning optical
equipment, fiber optics, and other
sensitive surfaces.
• Non-abrasive
• Extremely soft
• Highly absorbent
2351-100 100 4"x4" (10cm x 10cm) flat wipes
2352-100 100 9"x9" (23cm x 23cm) flat wipes
2354
TECHCLEAN ULTRAWIPE
™
Textured Scrubbing Wipe
Patterned, hydroentangled
cellulose/polyester wipe is designed for
aggressive scrubbing. Texture provides
abrasive surface, but will not scratch most sensitive surfaces.
• Textured Surface Scrubs Without Scratching
• Tear Resistant
2354-100 100 12"x12" (30.5cm x 30.5cm) flat wipes
2355
TECHCLEAN PURWIPE
™
Low-Linting Poly Wipe
100% polyester wipe is a strong, lowlinting wipe that is idea for SMT stencil
cleaning and PCB rework. Tear resistant
to allow cleaning around leads without fraying.
• Very Low Particulate Count
• Tear Resistant
2355-100 100 9"x9" (23cm x 23cm) flat wipes
2357
TECHCLEAN TWILL WIPE
Tear Resistant Cotton
100% cotton twill weave designed for
wiping abrasive surfaces. Tear resistant to
allow cleaning around leads without
fraying. Low static generation, so good for static sensitive areas.
• Tightly Woven 100% Cotton
• Tear Resistant
• Low Static Generation
2357-100 100 6"x6" (15cm x 15cm) flat wipes
2358
TECHCLEAN SMT WIPE
Lint-Free Foam
Polyurethane foam wipe designed for
cleaning surface mount stencils and
screening equipment. Fiber-free foam
does not generate lint, which can clog fine pitched stencils
and cause misprints.
• Fiber-Free Construction — No Linting
• Will Not Snag on Stencils
• Tear Resistant
2358-50 50 9"x9" (23cm x 23cm) flat wipes
Also available:
See page 5 and 6 for other great SMT cleaners including water, IPA, or
Hydrocarbon based pre-saturated wipes.
2362
ANTI-STATIC WIPE
Polyester wipe that is interwoven with
DuPont's NEGA-STAT carbon yarn.
NEGA-STAT dissipates static charge,
preventing static build-up and allowing
dissipation. Perfect for dry wiping ESD-sensitive components
and boards. Tear resistant to allow cleaning around
through-hole leads without fraying.
• Anti-Static — Will Not Generate Charge
• ESD-Safe
• Very Low Particulate Count
• Tear Resistant
2361-150 150 9"x9" (23cm x 23cm) flat wipes
2366 • 2367
ROLL WIPES for DEK and MPM SMT Printers
Made from low lint fabric and designed for vacuum operation.
• Maximum Absorbency
• Strong Both Wet & Dry
• Textured Non-Woven Fabric
• Low Linting – Prevents Misprints
• Density 68 GSM
Fits DEK 265 and 288 SMT printers.
2366-DEK 39' (11.9M) L Roll x 20.3" (51.5cm) W, .79" (20mm) ID
Fits MPM AP23, AP24, AP25, and AP27 SMT printers.
2367-MPM 39' (11.9M) L Roll x 17.5"(44.5cm) W, .75" (19mm) ID