Techspray 2316, 2317 Data Sheet
Product Information
Fiber Optic Swabs
2316, 2317
Introduction
The 1.25mm (2316) and 2.5mm (2317) wrapped foam fiber optic swabs are ideal
for removing transmission disrupting contaminants in bulkhead connectors. The
head conforms to the various connector shapes, cleaning the conductor
bulkhead corners inside the bulkhead pocket. These swabs may be used wet or
dry to remove dirt and oil contamination. Each swab is manufactured with
superior proprietary foam; no glues are used in the manufacturing process,
thereby minimizing leachable contaminants.
Chemical Components
This product does not contain any hazardous ingredients as
Environmental Policy
Packaging and Availability
Resources
North America Europe Countries Outside US
Tech Spray L.P. Techspray International Call to locate a distributor
P.O. Box 949 UNIT 4, 44/46 Bunyan Road, Kempston in your country.
Amarillo, TX 79105 Bedford MK42 8HL United Kingdom
800-858-4043 +44 (0) 1234 855443
email: tsales@techspray.com email: tseurope@techspray.com
per OSHA 29 CFR 1910.1200 Subpt.(z).
Techspray® is committed to developing products to ensure a safer and cleaner
environment. We will continue to meet and sustain the regulations of all federal,
state and local government agencies.
Fiber Optic Swabs are available in the following sizes:
2316-10 2316-50 2316-1000
2317-10 2317-50 2317-1000
Techspray® products are supported by a global sales, technical and customer
services resources.
For additional technical information on this product or other Techspray® products
in the United States, call the technical sales department at 800-858-4043, email
tsales@techspray.com or visit our web site at: www.techspray.com
.
Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The
results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to
determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s
only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no
case will Techspray® be liable for any special, incidental, or consequential damages based on breach of warranty,
negligence or any other theory.
Tech Spray, L.P.
P.O. Box 949
Amarillo, TX 79105
www.techspray.com
English MSDS
French MSDS
German MSDS
Italian MSDS
Spanish MSDS
2316
2317
Copyright 2003 Tech Spray, L. P.
For Commercial Use Only
Loading...