Techspray 1977 Data Sheet

Product Information

Transistor Silicone Grease

Heat Sink Compound

1977
Introduction
Features / Benefits
Conducts Heat Nanthe Cleaning Easy Application
Color Specific Gravity Penetration, worked (ASD 217)
Service Temperature Range Thermal Conductivity, cal/cm/ C/s Dielectric Strength, KV/mm (UTE C 26225) Dielectric Strength at 1 kHz (AS D 150) Tangent of loss angel at 1 kHz (AS D 150) Volume Resistivity, ohm.cm (UTE C 25215) Drop Point, C (F) (AS D 566) Flash Point (TCC Method)
Chemical Components
Environmental Policy
Zinc Oxide, USP……………………………….. (1314-13-2) >70% This material is not considered to be a hazard. Products of this type are sold to consumers, over the counter
Techspray® is committed to developing products that have minimal effects on the environment. We will continue to meet and sustain the regulations of all federal, state and local government agencies.
Technical Data
White, opaque
2.4 @ 25˚C per ASTM D70 test method 280 Penetration, unworked after 24 hrs.,
maximum: 270 Bleed, 24 hrs./200°C (392°F), % maximum: 1.5 Evaporation, 24 hrs./200°C (392°F)
-40°C to 200°C/-40°F to 392°F 1 x 10-3 W/m/ C/s: 0.42 15
3.5 5 x 10-3 1 x 1015 None None
Packaging and Availability
Transistor Silicone Grease is available in the following sizes: 1977-DP 4 Ounce Squeeze Tube
Resources
Techspray® products are supported by a global sales, technical and customer services resources.
For additional technical information on this product or other Techspray® products in the United States, call the technical sales department at 800-858-4043, email tsales@techspray.com or visit our web site at:
North America Europe Countries Outside US
Tech Spray L.P. Techspray International Call to locate a distributor P.O. Box 949 UNIT 4, 44/46 Bunyan Road, Kempston in your country. Amarillo, TX 79105 Bedford MK42 8HL United Kingdom 800-858-4043 +44 (0) 1234 855443 email: tsales@techspray.com email: tseurope@techspray.com
Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no case will Techspray® be liable for any special, incidental, or consequential damages based o n breach of warranty, negligence or any other theory.
www.techspray.com.
Tech Spray, L.P. P.O. Box 949 Amarillo, TX 79105
www.techspray.com
Copyright 2004 Tech Spray, L. P.
For Commercial Use Only
Loading...