Techspray 1733 Data Sheet

Product Information

Zero Charge® Mat & Table Top Cleaner

Anti-Static Cleaner

1733

Introduction

A neutral pH cleaner for general use in production areas that removes insulating
contaminants such as flux residues, oils, greases, nicotine, dirt, and grime. Mat &
Table Top Cleaner eliminates charge while leaving an anti-static agent that helps
prevent static charge build-up.

Features / Benefits

Rejuvenates Anti-Static Mats
No Ammonia
Non-Corrosive
Anti-Static Formulation
Non-Abrasive
Leaves No Insulating Film

Chemical Components

Deionized Water………………………………. (7732-18-5) 95-99%
Sodium Hydroxide…………………………….. (1310-73-2) <<1%
Poly(oxy-1,2-ethanediyl………………………. (9016-45-9) <1%
Dodecylbenzene Sulfonic Acid………………. (27176-87-0) <1%
Isopropanol…………………………………….. (67-63-0) .4%
Tetrasodium Ethylenediamine-Tetraacetate <<1%
Diethanol Amide of coconut fatty acid <<1%

Environmental Policy

Packaging and Availability

Sodium Tripolyphosphate…………………….. (7758-29-4) <<1%

Techspray® is committed to developing products to ensure a safer and cleaner
environment. We will continue to meet and sustain the regulations of all federal,
state and local government agencies.

Zero Charge® Mat & Table Top is available in the following sizes:

1733-2FP 2 Ounce Finger Pump
1733-PT 1 Pint with Trigger in Plastic
1733-QT 1 Quart with Trigger in Plastic
1733-G 1 Gallon in Plastic
1733-5G 5 Gallons in Plastic

Resources

Techspray® products are supported by a global sales, technical and customer
services resources.

For additional technical information on this product or other Techspray® products
in the United States, call the technical sales department at 800-858-4043, email

North America Europe Countries Outside US

Tech Spray L.P. Techspray International Call to locate a distributor
P.O. Box 949 UNIT 4, 44/46 Bunyan Road, Kempston in your country.
Amarillo, TX 79105 Bedford MK42 8HL United Kingdom
800-858-4043 [phone]
email: [e-mail] email: [e-mail]

Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The
results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to
determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s
only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no
case will Techspray® be liable for any special, incidental, or consequential damages based on breach of warranty,
negligence or any other theory.

[e-mail] or visit our web site at: www.techspray.com.

Tech Spray, L.P.
P.O. Box 949
Amarillo, TX 79105

www.techspray.com

English MSDS
French MSDS
German MSDS
Italian MSDS
Spanish MSDS

Copyright 2003 Tech Spray, L. P.

For Commercial Use Only