Techspray 1673 Data Sheet

Product Information

Economy Duster

HFC-152a Duster

1673

Introduction

Formulated with HFC-152a, this exceptionally pure, moisture-free, inert gas
removes particles without the use of harmful solvents. Because HFCs do not
harm the ozone, this product has a zero ozone depletion factor. Duster removes
microscopic contaminants, lint, dust, metallic oxide deposits and other soils. Not

for use on powered electrical equipment, on hot surfaces, and around open
flames or sparks.

Features / Benefits

32% Higher Volume than 134a-based Duster (1671-10S)
Non-Ozone Depleting
Moisture-Free Gas
Odorless
Zero Residue
Low GWP (Global Warming Potential)

Chemical Components

Difluoroethane……………………...………….. (75-37-6) 100%

Environmental Policy

Techspray® is committed to developing products to ensure a safer and cleaner
environment. We will continue to meet and sustain the regulations of all federal,
state and local government agencies.

Packaging and Availability

Duster is available in the following sizes:
152a-based Economy Duster
1673-10S 10 Ounce Aerosol

134a-based Non-Flammable Duster
1671-8S 8 Ounce Aerosol
1671-10S 10 Ounce Aerosol
1671-10RS 10 Ounce Aerosol Refill
1671-15S 15 Ounce Aerosol
1671-10SK 1 Kit Containing:

Multi-Directional Spray Attachment

1671-10RS

Resources

Techspray® products are supported by global sales, technical and customer
services resources.

For additional technical information on this product or other Techspray® products
in the United States, call the technical sales department at 800-858-4043, email
[e-mail] or visit our web site at:

North America Europe Countries Outside US

Techspray Techspray International Call to locate a distributor
P.O. Box 949 UNIT 4, 44/46 Bunyan Road, Kempston in your country.
Amarillo, TX 79105 Bedford MK42 8HL United Kingdom
800-858-4043 [phone]
email: [e-mail] email: [e-mail]

Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The
results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to
determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s
only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no
case will Techspray® be liable for any special, incidental, or consequential damages based o n breach of warranty,
negligence or any other theory.

www.techspray.com.

Techspray
P.O. Box 949
Amarillo, TX 79105

www.techspray.com

Copyright 2006 Tech Spray, L. P.

For Commercial Use Only