Techspray 1666 Data Sheet

Product Information

Asahiklin AK225 AES

Light Duty Defluxer

1666

Introduction

Using ethanol instead of methanol as the defluxing additive, Asahiklin AES offers
improved user safety. Ethanol, although not as good a defluxing solvent as
methanol, is much safer to use. The azeotropic mixture is non-flammable and
safe on plastics and metals. Configured for vapor degreasing and cold-batch
cleaning, AES is the safer choice for flux removal.

Features / Benefits

Non-Flammable
Rapidly Evaporating
Does Not Contain Methanol
Zero Residue
Safe on Most Plastics
Low Ozone Depletion Potential
Non-Corrosive
Replacement for CFC-113
Replacement for HCFC-141b
EPA SNAP Approved

Chemical Components

3,3-Dichloro-1,1,1,2,2-pentafluoropropane…. (422-56-0) 40-45%
1,3-Dichloro-1,1,2,2,3-pentafluoropropane…. (507-55-1) 50-55%
Ethanol………………………………………….. (64-17-5) 4-5%
Nitromethane…………………………………... (75-52-5) < .5%

Environmental Policy

Techspray® is committed to developing products to ensure a safer and cleaner
environment. We will continue to meet and sustain the regulations of all federal,
state and local government agencies.

Packaging and Availability

Asahiklin AK225 AES may be ordered in the following container sizes:
1666-5G 55 Pounds in Metal

1666-55G 660 Pounds in Metal

Physical Properties

Boiling Point
Flash Point (TCC)
Evaporation Rate
Surface Tension
Kauri-Butanol (KB Value)

52°C / 136.5°F
None
>1

Resources

Techspray® products are supported by a global sales, technical and customer
services resources.

For additional technical information on this product or other Techspray® products
in the United States, call the technical sales department at 800-858-4043, email
[e-mail] or visit our web site at:

North America Europe Countries Outside US

Tech Spray L.P. Techspray International Call to locate a distributor
P.O. Box 949 UNIT 4, 44/46 Bunyan Road, Kempston in your country.
Amarillo, TX 79105 Bedford MK42 8HL United Kingdom
800-858-4043 [phone]
email: [e-mail] email: [e-mail]

Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The
results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to
determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s
only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no
case will Techspray® be liable for any special, incidental, or consequential damages based o n breach of warranty,
negligence or any other theory.

www.techspray.com.

Tech Spray, L.P.
P.O. Box 949
Amarillo, TX 79105

www.techspray.com

English MSDS
French MSDS
German MSDS
Italian MSDS
Spanish MSDS

Copyright 2004 Tech Spray, L. P.

For Commercial Use Only