Techspray 1665 Data Sheet

Product Information

Flux Remover AMS

General Purpose Defluxer

1665
Introduction
Features / Benefits
Non-Flammable Rapidly Evaporating Zero Residue Low Ozone Depletion Potential Non-Corrosive Replacement for CFC-113 Replacement for HCFC-141b
Chemical Components
3,3-Dichloro-1,1,1,2,2-pentafluoropropane (HCFC-225ca).. (422-56-0) 32-42%-Aerosol 40-45%-Bulk 1,3-Dichloro-1,1,2,2,3-pentafluoropropane (HCFC-225cb).. (507-55-1) 40-50%-Aerosol 50-55%-Bulk Methanol………………………………… (67-56-1) 4.6%-Aerosol
5.8%-Bulk Nitromethane…………………………….. (75-52-5) <.5% Aerosol - 1,1,1,2-Tetrafluoroethane…… (811-97-2) 18-23% Carbon Dioxide (Aerosol Propellant)…….… (124-38-9) 1-2%
Plastic Compatibility
Material Compatibility Material Compatibility
ABS Nylon Lexan HDPE CDPE C. E. Phenolic
Physical Properties
Boiling Point Flash Point (TCC) Evaporation Rate Surface Tension Kauri-Butanol (KB Value)
Excellent Excellent Excellent Excellent Excellent Excellent
PMMA POM PP PS PTFE PVC
56°C / 133°F None >1
Excellent Excellent Excellent Excellent Excellent Excellent
Environmental Policy
Techspray® is committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the regulations of all federal, state and local government agencies.
Packaging and Availability
Flux Remover AMS may be ordered in the following container sizes: 1665-8S 8 Ounce Aerosol
1665-18S 18 Ounce Aerosol 1665-5G 50 Pounds in Metal 1665-54G 600 Pounds in Metal
Resources
Techspray® products are supported by a global sales, technical and customer services resources.
For additional technical information on this product or other Techspray® products in the United States, call the technical sales department at 800-858-4043, email
North America Europe Countries Outside US
Tech Spray L.P. Techspray International Call to locate a distributor P.O. Box 949 UNIT 4, 44/46 Bunyan Road, Kempston in your country. Amarillo, TX 79105 Bedford MK42 8HL United Kingdom 800-858-4043 +44 (0) 1234 855443 email: tsales@techspray.com email: tseurope@techspray.com
Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no case will Techspray® be liable for any special, incidental, or consequential damages based o n breach of warranty, negligence or any other theory.
Aerosol MSDS
English French
tsales@techspray.com or visit our web site at:
Tech Spray, L.P. P.O. Box 949 Amarillo, TX 79105
www.techspray.com
German Italian Spanish
Bulk MSDS
English French German Italian Spanish
www.techspray.com.
Copyright 2004 Tech Spray, L. P.
For Commercial Use Only
Loading...