Techspray 1658 Data Sheet

Product Information

Asahiklin AK225 ATE

Heavy Duty Cleaner/Degreaser

1658
Introduction
Features / Benefits
Non-Flammable Rapidly Evaporating Low Surface Tension
Chemical Components
3,3-Dichloro-1,1,1,2,2-pentafluoropropane……..(422-56-0) 16.5-20.7% 1,3-Dichloro-1,1,2,2,3-pentafluoropropane……..(507-55-1) 20.6-24.8% Trans-dichloroethylene……………………………(156-60-5) 50-60% Ethanol………………………………………………(64-17-5) 3-6% Nitromethane……………………………………….(75-52-5) < .5%
Plastic Compatibility
Material Compatibility Material Compatibility
ABS Nylon Lexan HDPE CDPE C. E. Phenolic
Environmental Policy
Techspray® is committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the regulations of all federal, state and local government agencies.
Boiling Point Flash Point (TCC) Evaporation Rate Surface Tension Kauri-Butanol (KB Value)
Not Compatible
Excellent
Not Compatible
Excellent Excellent Excellent
Physical Properties
44.6°C / 114°F None >1
PMMA POM PP PS PTFE PVC
Not Compatible
Excellent Excellent
Not Compatible
Excellent Excellent
Packaging and Availability
Asahiklin AK225 ATE may be ordered in the following container sizes: 1658-5G 55 Pounds in Metal
1658-55G 551 Pounds in Metal
Resources
Techspray® products are supported by a global sales, technical and customer services resources.
For additional technical information on this product or other Techspray® products in the United States, call the technical sales department at 800-858-4043, email tsales@techspray.com or visit our web site at:
North America Europe Countries Outside US
Tech Spray L.P. Techspray International Call to locate a distributor P.O. Box 949 UNIT 4, 44/46 Bunyan Road, Kempston in your country. Amarillo, TX 79105 Bedford MK42 8HL United Kingdom 800-858-4043 +44 (0) 1234 855443 email: tsales@techspray.com email: tseurope@techspray.com
Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no case will Techspray® be liable for any special, incidental, or consequential damages based o n breach of warranty, negligence or any other theory.
www.techspray.com.
Tech Spray, L.P. P.O. Box 949 Amarillo, TX 79105
www.techspray.com
English MSDS French MSDS German MSDS Italian MSDS Spanish MSDS
Copyright 2004 Tech Spray, L. P.
For Commercial Use Only
Loading...