Product Information
Flux Remover G3® - Bulk
Defluxer
1638
Introduction
The patented formula of Flux Remover G3® - Bulk was developed to be the
direct replacement for defluxers containing HCFC-141b. It is designed
specifically for removing R, RA, RMA and SA type flux residues after high
temperature reflow. This flux remover can be used as an all-purpose cleaner to
remove light oils, silicones, waxes, greases and similar contaminants often found
in electronics manufacturing. Not recommended for vapor degreasing or heated
ultrasonic tanks.
Features / Benefits
Non-Flammable
Cleans Flux from Lead-Free Soldering
Rapidly Evaporating
Zero Residue
Non-Corrosive
Chemical Components
3,3-Dichloro-1,1,1,2,2-pentafluoropropane... (422-56-0) 25-35%
Plastic Compatibility
Environmental Policy
1,2-transdichloroethylene (Trans)…………… (156-60-5) 60-85%
Material Compatibility Material Compatibility
ABS
Nylon
Lexan
HDPE
C. E. Phenolic
PMMA
Not Compatible
Compatible
Not Compatible
Compatible
Compatible
Not Compatible
Techspray® is committed to developing products to ensure a safer and cleaner
environment. We will continue to meet and sustain the regulations of all federal,
state and local government agencies.
Physical Properties
Boiling Point
Flash Point (TCC)
Evaporation Rate
Surface Tension
Kauri-Butanol (KB Value)
POM
PP
PS
PTFE
PVC
PVC Rigid
47.7°C / 118°F
None
0.33 (TCE=1)
19.9 dyne/cm
115
Compatible
Compatible
Not Compatible
Compatible
Compatible
Not Compatible
Licensing Restriction
The use of this product for cleaning is subject to U.S. Patent No. 5,902,412 and
use is restricted by Tech Spray, L. P.
Packaging and Availability
Flux Remover G3® - Bulk is available in the following sizes:
1638-G 1 Gallon in Glass
1638-5G 50 Pounds in Metal
1638-54G 585 Pounds in Metal
Resources
Techspray® products are supported by global sales, technical and customer
service resources.
For additional technical information on this product or other Techspray® products
in the United States, call the technical sales department at 800-858-4043, email
tsales@techspray.com or visit our web site at:
North America Europe Countries Outside US
Tech Spray L.P. Techspray International Call to locate a distributor
P.O. Box 949 UNIT 4, 44/46 Bunyan Road, Kempston in your country.
Amarillo, TX 79105 Bedford MK42 8HL United Kingdom
800-858-4043 +44 (0) 1234 855443
email: tsales@techspray.com email: tseurope@techspray.com
www.techspray.com.
Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The
results may vary due to differences in test types and conditions. We recommend that each user evaluate the product to
determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s
only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no
case will Techspray® be liable for any special, incidental, or consequential damages based o n breach of warranty,
negligence or any other theory.
MSDS
Tech Spray, L.P.
P.O. Box 949
Amarillo, TX 79105
www.techspray.com
English
French
German
Italian
Spanish
Copyright 2004 Tech Spray, L. P.
For Commercial Use Only