Techspray 1621 Data Sheet

Product Information

EcoLine™ Flux Remover

General Purpose Defluxer

1621

Introduction

EcoLine™ Flux Remover is a unique combination of hydrocarbon solve nts and
alcohols making it an excellent defluxer. Safe on plastics and rapidly evaporating,
the Flux Remover dissolves type R, RMA, SA and most no-clean fluxes. Can
also be used as an all-purpose cleaner for removal of light oils, silicones, waxes,
greases and similar
contaminants.

Features / Benefits

EPA SNAP Approved
Non-Ozone Depleting
Safe on Most Plastics
Zero Residue
Rapidly Evaporating
Non-Corrosive

Chemical Components

Isopropanol………………………….…………. (67-63-0) 50-55%
Ethanol…………...……………………….……. (64-17-5) 5-10%-Aerosol
6-11%-Bulk
2-Methyl-2-Propanol……………………….….. (75-65-0) <<1%-Aerosol

1.4%-Bulk
Dimethyl Ketone………………………………. (67-64-1) 10-12%
Cyclotetramethylene Oxide……….………….. (109-99-9) 20-25%
Acetic Acid, Propyl Ester……………….…….. (109-60-4) 5-10%
Carbon Dioxide (Aerosol Propellant)……….. (124-38-9) 1-5%

Plastic Compatibility

Material Compatibility Material Compatibility

ABS
Nylon
Lexan
HDPE
CDPE
C. E. Phenolic

Physical Properties

Boiling Point
Flash Point (TCC)
Evaporation Rate
Surface Tension
Kauri-Butanol (KB Value)

Excellent
Excellent
Excellent
Excellent
Excellent
Excellent

PMMA
POM
PP
PS
PTFE
PVC

80°C / 176°F
53°F
NIF

Excellent
Excellent
Excellent
Excellent
Excellent
Excellent

Environmental Policy

Techspray® is committed to developing products to ensure a safer and cleaner
environment. We will continue to meet and sustain the regulations of all federal,
state and local government agencies.

Packaging and Availability

EcoLine™ Flux Remover may be ordered in the following container sizes:
1621-4S 4 Ounce Aerosol

1621-10S 10 Ounce Aerosol
1621-G 1 Gallon in Metal
1621-5G 33 Pounds in Metal
1621-54G 340 Pounds in Metal

Resources

Techspray® products are supported by a global sales, technical and customer
services resources.

For additional technical information on this product or other Techspray® products
in the United States, call the technical sales department at 800-858-4043, email
[e-mail] or visit our web site at:

North America Europe Countries Outside US

Tech Spray L.P. Techspray International Call to locate a distributor
P.O. Box 949 UNIT 4, 44/46 Bunyan Road, Kempston in your country.
Amarillo, TX 79105 Bedford MK42 8HL United Kingdom
800-858-4043 [phone]
email: [e-mail] email: [e-mail]

Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The
results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to
determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s
only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no
case will Techspray® be liable for any special, incidental, or consequential damages based o n breach of warranty,
negligence or any other theory.

www.techspray.com.

Tech Spray, L.P.
P.O. Box 949
Amarillo, TX 79105

www.techspray.com

Aerosol MSDS

English
French
German
Italian
Spanish

Bulk MSDS

English
French
German
Italian
Spanish

Copyright 2004 Tech Spray, L. P.

For Commercial Use Only