Techspray 1608, 1608CP Data Sheet
Isopropyl Alcohol (IPA) Wipes – 70%
Rev. C (3/20) Page 1 of 2
Product# 1608, 1608CP
Product Description
Convenient, low-linting wipes are pre-saturated with 70% pure IPA.
• Ideal for electronics cleaning
• Plastic-safe
• Lint-free & tear resistant
Packaging Options
• Flip-top tubs (-100FL, -150FL) - Spring-loaded lid automatically
closes and sealed top reduces waste from dry-out
• Disposable tubs (-100DSP, -150DSP) - Lower cost disposable tub
• Refill rolls (-100R, -150R) - Replacement wipes fit in either Flip-top
or Pop-up tubs to save money and reduce waste
Wipe Options
Nonwoven Polyester Material (1608)
•
o
5”x8” (127mm x 203mm)
o
550g IPA/roll
o
100 wipes/roll
Commercial-Grade
•
Nonwoven Cellulose-Poly Material (1608CP)
Engineered for high volume PCB assembly and other types of
production. This cellulose-poly material has greater absorbency
and is less likely to snag or shred, making these wipes ideal for
stencil and PCB cleaning.
o
5”x8” (127mm x 203mm)
o
650g IPA/roll
o
150 wipes/roll – 50% more wipes & less packaging waste!
Typical Product Data and Physical Properties
Physical State: Liquid
Odor: Alcohol odor
Appearance: Clear, Colorless liquid
pH: Neutral
Percent Volatile: 100
Specific Gravity: 0.872 to 0.883
Flashpoint and Method: 16°C (61°F) Closed Cup
Shelf life: 2 years
Packaging and Availability
1608-100FL 100 ct. in flip-top tub, non-woven poly mtl.
1608-100DSP 100 ct. in disposable tub, non-woven poly mtl.
1608-100R 100 ct. refill, non-woven poly mtl.
1608CP-150DSP 150 ct. in disposable tub, non-woven cellulose- poly mtl.
1608CP-150R 150 ct. refill, non-woven cellulose-poly mtl.
Loading...