Technotherm CHM 1000 E, CHM 500 E, CHM 1500 E, CHM 2000 E, CHM 1500 DSM Installation And Technical Manual

Feel good through warmth from electricity - www.technotherm.de

|1

Model

• CHM 500 E

• CHM 1000 E

• CHM 1500 E

• CHM 2000 E

• CHM 500 DSM

• CHM 1000 DSM

• CHM 1500 DSM

• CHM 2000 DSM

• CHM 500 RF

• CHM 1000 RF

• CHM 1500 RF

• CHM 2000 RF

Installation and technical manual
CHM Heater - castor / feets

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY

AND RETAINED FOR FUTURE REFERENCE. BE SURE

TO OBSERVE ALL LABELS AND WARNINGS ON THE

APPLIANCE

Id.-Nr. 911 360 511

Edion :01/18

This product is only suitable for

well-insulated rooms or for

occasional use.

Feel good through warmth from electricity - www.technotherm.de

Installation and technical manual CHM heater

Feel good through warmth from electricity - www.technotherm.de

GB

2|

1. Important Safety instrucons

• People (including children) who are limited in their physical, sensory, or
mental capacies should not use this device at any me. Furthermore do
not handle this instrument if you do not possess the necessary experien­ce and knowledge to do so. This device should only be handled under the
supervision of a qualied person and aer a thorough introducon.

• Do not leave children alone with the device, and supervise them at all
mes to keep them from geng harmed.

WARNING: Do not cover! Otherwise this instrument will overheat.

• Do not place the heater underneath a socket, drainage or the like.

• To keep from geng burned, do not touch heater´s surface whenever it

is turned on.

• Please use the handle whenever you have to move the heater. Do not
put the cord underneath the carpet or a rug and make sure that it is not
a tripping hazard

• Plug the heater into properly grounded sockets only.

• Do not use the heater in any other way than described in the user ma-

nual. Any other way of use may lead to re, electrocuon, and may cause
serious harm to the person.

• Do not use this device near bathtubs, showers or swimming pools.

• In case the connecon cable is damaged it has to be replaced by the ma-

nufacturer or someone commissioned by the manufacturer.

WARNING: Do not use a switching-oriented device, like a mekeeper, when
operang this heater. This could cause a change in the thermal adjustment
which is potenally hazardous!

• To keep the device from overheang do not put towels or clothing on top.

• When using the heater, make sure it is in an upright posion and posi-

oned on a even and dry place.

• Do not put any foreign objects into the vent. This may cause electrocu­on, re or damage to the heater.

• Do not use an extension cord unless approved by an electrician.

• This device is for private use only, do not use in any other way than inten-

ded by the manufacturer.

• Do not use the device near curtains, highly combusble, extremely explo­sive or malleable materials.

• Keep a distance of a at least 1.0 m between combusble materials- like
furniture, cushions, bedding, paper, clothing, curtains-and the heang
device.

Installation and technical manual CHM heater

Feel good through warmth from electricity - www.technotherm.de

GB

|3

• Do not use the device in rooms were petrol, paint or any other ammable

liquids are stored.

• Do not use the device outside.

Warning! this device has to be grounded

This device may only be operated using alternang current and the operang
voltage indicated on the power rang plate

• Nominal Voltage 230V AC, 50 Hz

• Protecon Class I

• Degree of Protecon IP 20

• Room Thermostat 7°C ll 30°C

This device is only for mobile use like with castors or feets

Feel good through warmth from electricity - www.technotherm.de

Installation and technical manual CHM heater

Feel good through warmth from electricity - www.technotherm.de

GB

4|

2.1 User Manuel for the CHM DSM model

For addional installaon and registraon of the DSM Thermostat and router please visit
hp://www.lucht-lhz.de/lhz-app-gb.html and download the manual or ask our helpdesk.

3. User Manual CHM RF Model

3.1.1 Seng the Room Thermostat

Press the receiver buon for more than 3 seconds, unl the indicator light begins to ash. Subsequent­ly press the transmier key in the conguraon mode. (see User Manual Receiver) As soon as the indi­cator light stops ashing the two products are assigned.

3.1.2 Seng the sender

Press the receiver buon for at least 3 seconds unl the indicator light starts ashing.
Two modes of operaon are possible.

Slow ashing: On\O switch
Fast ashing: insgator

To switch the mode again, press the key briey. Take the transmier into the Conguraon mode (see
user manual transmier). Check that the indicator light is no longer ashing.

Applicaon Example

The use of a room thermostat in combinaon with a opening detector is ideal, because the opening de­tector will detect if a window is open and will automacally switch to frost protecon. By pressing the
receiver buon for approximately 10 seconds, you can change the relay´s seng. You know the seng
is changed as soon as the signal light stops ashing.

3.1.3 Deleng Allocaons

To delete the seng simply press the receiver key for approximately 30 seconds unl you see the recei­ver light ash briey. All transmiers are now deleted.

3.1.4 Receiver RF- Technical Specicaons

• Power Supply 230 V, 50 Hz +/-10%

• Protecon Class II

• Expenditure : 0,5 VA

• Switching capacity max.: 16 A 230 Ve Cos j =1 or max. 300 W with lighng control

• Radio Frequency 868 MHz (NormEN 300 220),

• Radio Range up to 300 m in an open eld, indoors up to ca. 30m, depending on the

• construcon of the building and the electromagnec interference

• Maximal Number of receivers: 8

Installation and technical manual CHM heater

Feel good through warmth from electricity - www.technotherm.de

GB

|5

• Mode of operaon: type 1.C (Micro-disconnecon)

• Operang Temperature: -5°C to +50°C

• Storage Temperature: -10 °C +70°C

• Dimensions: 120 x 54 x 25 mm

• Degree of Protecon : IP 44 - IK 04

• To be installed in average polluted Areas

WARNING

Do not install this device in areas that present an explosion hazard like a garage. Remove all protec­ve coverage before turning on the device. When using the device for the rst me you might detect
a strong odor. This is no reason for concern; it is caused by residues of producon and will disappear
shortly.
The rising heat may cause stains on the ceiling, however this phenomena can be caused by any other
heang device as well. Only a qualied electrician may open or remove the device from the power
supply.

4. Maintenance

Before cleaning the device be sure to turn it o. To clean use a damp towel and a mild detergent.

5. Assembly instrucon

This Manual is very important and has to be kept at a safe place at all mes. Be sure to hand this manual
to any other succeeding owner of the device.
The device is an electrical heater that was designed and intended to be mounted to walls. The device
comes with a power plug that has to be plugged into an outlet.
The device is designed to be connected to 230V (nominal) alternang current (AC).

Feel good through warmth from electricity - www.technotherm.de

Installation and technical manual CHM heater

Feel good through warmth from electricity - www.technotherm.de

GB

6|

5.1 Castor / feet installaon

When installing the device, the safety distance must be strictly adhered to, so that ammable materials
can not ignite.

Insert the rollers / feet into the ribs from below into the unit. Keep an even distance to maintain the
balance of the equipment.

• Due to possible re hazard the safety distances are observed during assembly:

Side walls of the heater to any masonry: 5 cm
Side walls of the heater to combusble materials: 10 cm
Distance radiator to the oor: 8 cm
arranged spaced upper radiator limit to about
components or covers (. Eg window):
ammable 15 cm
nonammable 10 cm

To prevent inammable materials from catching re be sure to keep the prescribed safety distance
when installing the device.

If you want to install the device in your bathroom, be sure to keep it out of reach for people taking a
shower or a bath.

6. Installaon of Electricity

The device was developed for an electrical voltage of 230 V(nominal) and an alternang current of (AC)
50 Hz.

The electrical installaon may only be performed according to the user manual and only by a qualied
Electrician.

The device was designed to be used with terminaon and the connecon cable has to be plugged into
an appropriate socket at all mes. (Noce Permanent cables may not be used)
The distance between the receptacle and the device hast to be at least 10cm. The connecon line may
not touch the device at any me.

In case the connecon cable is damaged contact the manufacturer immediately!

Model

Power
[Wa]

Width

A

[mm]

Height

B

[mm]

Depth

C

[mm]

D

[mm]

F

[mm]

G

[mm]

CHM 500 500 380 630 100 186 521 445

CHM 1000 1000 680 630 100 336 506 430

CHM 1500 1500 980 630 100 500 506 430

CHM 2000 2000 980 630 100 500 506 430

Installation and technical manual CHM heater

Feel good through warmth from electricity - www.technotherm.de

GB

|7

Subject to errors and technical amendments. Dimensions without guarantee! Edion 01/18

Information requirements for electric local space heaters

From 01.01.2018, the EU conformity of these devices is additionally linked to the fulllment of the Ecodesign requirements 2015/1188.
The installation and commissioning of the devices is only permitted in conjunction with external room temperature controllers that fulll the following functions:

• Electronic room temperature control with weekday control

And has at least one of the following properties:

• Room temperature control with presence detection

• Room temperature control with “open window” function

• with remote control option

• with adaptive start control

• with heating time limitation

Technotherm meets the following requirements and thus the ErP Directive:

• Electronic room temperature control with weekday

• control remote Control option

Failure to comply with these requirements will result in the loss of the CE mark.

The additional operating instructions for setting up the thermostats and interfaces please ask in our support - see last page!

Model: CHM RF (Operation only permitted in conjunction with the thermostat TPF-Eco and the Eco-interface)

Item Symbol Value Value Item Value

Heat output

Type of heat input, for electric storage local space heaters only (select one)

Nominal heat output

P

nom

05 1,0 1,5 2,0 kW

manual heat charge control, with integrated thermostat NO

Minimum heat
output (indicative)

P

min

0,5 1,0 1,5 2,0 kW

manual heat charge control with room and/or outdoor temperature
feedback

NO

Maximum continuo­us heat output

P

max,c

0,5 1,0 1,5 12,0 kW

electronic heat charge control with room and/or outdoor
temperature feedback

NO

Auxiliary electrici­ty consumption

fan assisted heat output NO

At nominal heat
output

el

max

0,5 1,0 1,5 2,0 kW

Type of heat output/room temperature control (select
one)

At minimum heat
output

el

min

<0,5 <0,5 <0,5 <0,5

W

single stage heat output and no room temperature control No

Two or more manual stages, no room temperature control No

In standby mode

el

SB

<0,5 y0,5 <0,5 <0,5

W

with mechanic thermostat room temperature control N0

with electronic room temperature control No

electronic room temperature control plus day timer

No

electronic room temperature control plus week timer

Yes

Other control options (multiple selections possible)

room temperature control, with presence detection No

room temperature control, with open window detection No

with distance control option Yes

with adaptive start control No

with working time limitation No

with black bulb sensor

No

Contact Information:

Lucht LHZ Elektroheizung GmbG & Co. KG | Reinhard-Schmidt.Str.1 D-09217 Burgstädt

Feel good through warmth from electricity - www.technotherm.de

Installation and technical manual CHM heater

Feel good through warmth from electricity - www.technotherm.de

GB

8|

Subject to errors and technical amendments. Dimensions without guarantee! Edion 01/18

Information requirements for electric local space heaters

From 01.01.2018, the EU conformity of these devices is additionally linked to the fulllment of the Ecodesign requirements 2015/1188.
The installation and commissioning of the devices is only permitted in conjunction with external room temperature controllers that fulll the following functions:

• Electronic room temperature control

Technotherm meets the following requirements and thus the ErP Directive:

• Electronic room temperature control

Failure to comply with these requirements will result in the loss of the CE mark.

The additional operating instructions for setting up the thermostats and interfaces please ask in our support - see last page!

Model: CHM E (Operation only permitted in conjunction with castors or feets)

Item Symbol Value Value Item Value

Heat output

Type of heat input, for electric storage local space heaters only (select one)

Nominal heat output

P

nom

05 1,0 1,5 2,0 kW

manual heat charge control, with integrated thermostat NO

Minimum heat
output (indicative)

P

min

0,5 1,0 1,5 2,0 kW

manual heat charge control with room and/or outdoor temperature
feedback

NO

Maximum continuo­us heat output

P

max,c

0,5 1,0 1,5 12,0 kW

electronic heat charge control with room and/or outdoor
temperature feedback

NO

Auxiliary electrici­ty consumption

fan assisted heat output NO

At nominal heat
output

el

max

0,5 1,0 1,5 2,0 kW

Type of heat output/room temperature control (select
one)

At minimum heat
output

el

min

<0,5 <0,5 <0,5 <0,5

W

single stage heat output and no room temperature control No

Two or more manual stages, no room temperature control No

In standby mode

el

SB

<0,5 y0,5 <0,5 <0,5

W

with mechanic thermostat room temperature control N0

with electronic room temperature control Yes

electronic room temperature control plus day timer

No

electronic room temperature control plus week timer

No

Other control options (multiple selections possible)

room temperature control, with presence detection No

room temperature control, with open window detection No

with distance control option No

with adaptive start control No

with working time limitation No

with black bulb sensor

No

Contact Information:

Lucht LHZ Elektroheizung GmbG & Co. KG | Reinhard-Schmidt.Str.1 D-09217 Burgstädt

Installation and technical manual CHM heater

Feel good through warmth from electricity - www.technotherm.de

GB

|9

TECHNOTHERM a brand of Lucht LHZ GmbH & Co. KG

Reinhard-Schmidt-Str. 1 | 09217 Burgstädt

Telefon: [phone]

Telefax: [phone]

[e-mail] | www.technotherm.de

Subject to errors and technical amendments. Dimensions without guarantee! Edion 01/18

TECHNOTHERM Support

[phone]

Information requirements for electric local space heaters

From 01.01.2018, the EU conformity of these devices is additionally linked to the fulllment of the Ecodesign requirements 2015/1188.
The installation and commissioning of the devices is only permitted in conjunction with external room temperature controllers that fulll the following functions:

• Electronic room temperature control with weekday control

And has at least one of the following properties:

• Room temperature control with presence detection

• Room temperature control with “open window” function

• with remote control option

• with adaptive start control

• with heating time limitation

Technotherm meets the following requirements and thus the ErP Directive:

• Electronic room temperature control with weekday

• distance control option

• adaptive start control

• room temperature control, with open window detection

Failure to comply with these requirements will result in the loss of the CE mark.

The additional operating instructions for setting up the thermostats and interfaces please ask in our support - see last page!

Model: CHM DSM (Operation only permitted in conjunction with the DSM-interface)

Item Symbol Value Value Item Value

Heat output

Type of heat input, for electric storage local space heaters only (select one)

Nominal heat output

P

nom

05 1,0 1,5 2,0 kW

manual heat charge control, with integrated thermostat NO

Minimum heat
output (indicative)

P

min

0,5 1,0 1,5 2,0 kW

manual heat charge control with room and/or outdoor temperature
feedback

NO

Maximum continuo­us heat output

P

max,c

0,5 1,0 1,5 12,0 kW

electronic heat charge control with room and/or outdoor
temperature feedback

NO

Auxiliary electrici­ty consumption

fan assisted heat output NO

At nominal heat
output

el

max

0,5 1,0 1,5 2,0 W

Type of heat output/room temperature control (select
one)

At minimum heat
output

el

min

<0,5 <0,5 <0,5 <0,5

W

single stage heat output and no room temperature control No

Two or more manual stages, no room temperature control No

In standby mode

el

SB

<0,5 <0,5 <0,5 <0,5

W

with mechanic thermostat room temperature control N0

with electronic room temperature control No

electronic room temperature control plus day timer

No

electronic room temperature control plus week timer

Yes

Other control options (multiple selections possible)

room temperature control, with presence detection No

room temperature control, with open window detection Yes

with distance control option Yes

with adaptive start control Yes

with working time limitation No

with black bulb sensor

No

Contact Information:

Lucht LHZ Elektroheizung GmbG & Co. KG | Reinhard-Schmidt.Str.1 D-09217 Burgstädt