Techno Line WT 2500 User manual

WT2500 User Manual

Radio Controlled Table Calendar Clock

Features:

`Clock auto synchronize via receiving DCF RCC (Radio Controlled Clock) signal

`Table Calendar with weeks

`D/M or M/D date format selectable

`Time zone setting +/-12h

`12/24 HR selectable

`°C/°F selectable

`Indoor Temperature measurement range: 0°C ~ +50°C (32°F~122°F)

`Indoor Humidity measurement range: 20% ~ 95%RH

`Dual Alarms

`Snooze function (5 minutes interval)

`Back light

`Powered by 2 x AA batteries (not included)

Power on or Reset:

`After power on or Reset, full display and buzzer beeps, unit will receive RCC signal up to 7 minutes, then enter Clock Mode.

Receiving of the RCC signal:

`When power on or reset, the unit will automatically receive RCC signal for Max. 7 minutes, and “” icon flash.

`At 1:00 /2:00 / 3:00 a.m., RCC receiving will be turned on automatically, and the clock will be synchronized if receive successfully. If this receiving fail, the radio mast icon disappears, the unit will receive RCC signal automatically next time.

`Press and hold the ”WAVE” key also can enable or disable the RCC receiving.

`During RCC receiving, only ”WAVE” and ”SNOOZE/LIGHT” keys have function.

F.Y.I.:

` Flashing “” icon indicates that the signal is strong, without the icon means the signal is weak.

` A fixed “ ” icon indicates that receiving successfully, without this icon means receiving fail.

`How to set offset time : Offset time means the time different between local time and Germany time; If local time is 1 hour faster than Germany time, then set the offset time to +1HR; If local time is 1 hour slower than Germany time, then set the offset time to -1HR; Unit’s clock will automatically set to local time after receiving DCF signal successfully.

`DST indicator: If unit receive signal with Daylight Saving Time ( DST ) successfully, DST icon will be on; Otherwise DST icon will disappear.

`We recommend a minimum distance of 2.5 meters to all sources of interference, such as television or computer monitor

`Radio receiving is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme

WT2500 User Manual

circumstances, place the unit close to the window.

Clock Mode:

` At Clock Mode, press ”MODE” key to toggle the display among Clock/ Weeks Display/ Alarm1/ Alarm2.

Clock setting:

`At Clock Mode, Press and hold the ”MODE” key more than 2 seconds to set Year Æ D/M or M/D Æ Month Æ Date Æ Offset Time Æ12/24HR ÆHour Æ Minute Æ°C/°F.

`Corresponding icon flash, then press ”+” or ”-” key to set the value; and hold ”+” or ”-” key for fast increasing or decreasing.

`Press ”MODE” key to confirm the setting and come to next setting, unit will return to Clock Mode after setting finish.

F.Y.I.:

` The seconds are set to “0” when change minute value during setting.

Alarm Setting:

`When display Alarm1 or Alarm2, press ”-” key to enable or disable corresponding alarm.

`When display Alarm1 or Alarm2 time, Press and hold ”MODE” key more than 2 seconds to set Alarm Hour & Minute, corresponding icon flash, then press ”+” or ”-” key to set the value; And hold ”+” or ”-” key for fast increasing or decreasing.

`Alarm sound crescendo for 2 minutes.

`During alarm, only press ”SNOOZE/LIGHT” key to enable snooze function , ” ” icons will flash , the unit will alarm 5 minutes later. If press other keys, alarm will stop the alarm immediately.

Month Display:

`At clock mode, press ”+” or “DOWN” key to look through month forward or backward . “Year / Month / Date” icons will flash accordingly; and press and hold ”+” or ”-” key for fast increasing or decreasing.

`Unit will return to clock mode if without key operation more than 1 minute or press ”MODE” key to exit look through status and return to clock mode.

Weeks Display:

`At clock mode, press ”MODE” key once to enter weeks look through mode, “Weeks” icon will flash at this mode. Press ”+” or ”-” key to look through weeks forward or backward; And press and hold ”+” or ”-” key for fast increasing or decreasing.

`Unit will return to clock mode if without key operation more than 1 minute, or press ”MODE” key to exit look through status and return to clock mode.

F.Y.I.:

`Comply with ISO 8601:2000, Monday is the first day of the week, and Sunday is the last day. The week include Jan 4 is the first week of the year.

`Current date only can be changed on clock setting mode.