Quick reference
MA10300 thermohygrometer with cable temperature sensor
MOBILE-ALERTS Sensor
This is a sensor for the "MOBILE-ALERTS" system, it can be used with this system only. To use the sensor you need a MOBILE-ALERTS gateway.
Sensor set up
Open the battery compartment of the temperature sensor and put in 2x AAA batteries with the correct polarity.
Add Sensor
Open the app, dashboard is displayed. Tap "Add new sensor" and scan the QR code on the back of the temperature sensor. Then set a name for the sensor.
Specifications |
|
Batteries: |
2 x micro (LR03, AAA) |
|
alkaline |
Battery life: |
approx. 2 years |
Measuring range temperature: |
– 39.9°C to +59.9°C |
Accuracy: |
1 °C |
Measuring range humidity: |
20-99% |
Accuracy: |
3% |
Measurement intervals: |
7 minutes |
Transmission range: |
100m (open area) |
Cable length: |
1,5m |
More information and detailed instructions can be found in the app at “Info” or at www.mobile-alerts.eu
The declaration of Conformity can be found at: www.mobile-alerts.eu/technoline/doc
Old batteries do not belong into general household waste. You are obliged to return used batteries to your vendor or collection points.
Electrical devices have to be disposed separately from the general household waste. Take your old electronics to your local waste collection point or recycling centre.