Technika SP114 User Manual

SP114
Owner’s Handbook
Portable speaker for iPhone with FM radio
IMPORTANT SAFETY INFORMATION
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
This symbol indicates that there are impor­tant operating and maintenance instructions in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a slightly damp cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install or operate near any heat sources such as radiators, stoves, or other apparatus that produce heat. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualied ser vice personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Warning: To reduce the risk of re or electrical shock, do not expose this product to rain or moisture. The product must not be exposed to dripping and splashing and no object lled with liquids such as a vase of owers should be placed on the product. No naked ame sources such as candles should be placed on the product. Caution: Changes or modications not expressly approved by the manufacturer could void the user’s authority to operate this device. Caution: Usage of controls or adjustments or performance of procedures other than those specied herein may result in hazardous exposure.
ELECTRICAL INFORMATION
Rating plates: The mains operating voltage of the AC Adaptor is marked on a rating plate on the plug face of the AC Adaptor. The rating plate of the main unit is located on the underside.
Rating plate
Use this appliance only with the supplied AC Adaptor. Using non­approved power supplies will void the warranty. The means of disconnecting this appliance from the mains supply is the AC adaptor/mains plug. This should be unobstructed and readily operable at all times.
IMPORTANT
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, this is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specically to iPod, iPhone, or iPad, respectively, and has been certied by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may aect wireless performance.
1
INDEX
INDEX
Introduction ............................................................2
Unpacking ...............................................................2
Connecting power ...................................................2
Controls & connections ............................................ 3
Fitting the batteries .................................................5
Selecting a source and setting the volume ..............5
Sound equaliser ....................................................... 5
Listening to the radio ..............................................5
IPod docking and compatibility ...............................6
Playing an iPod ........................................................7
AUX input ................................................................7
Care & Maintenance.................................................8
Specications ..........................................................8
Warranty .................................................................8
INTRODUCTION
The SP114 is a high quality docking station for an iPhone or iPod with a built-in stereo FM radio. The SP114 will also accept stereo analogue audio signals from audio sources via a Line input (Aux In). Portable operation is possible when batteries are tted.
PRELIMINARIES
UNPACKING
Carefully unpack the unit. If it is damaged, please return it to your nearest Tesco store for replacement. Remember to take your purchase receipt with you. Retain the User Handbook. If you pass the unit on to a third party make sure you pass on the handbook. We suggest you retain the packaging. If you dispose of it, do so having regard to any recycling regulations in your area.
CONTENTS
The carton should contain:
The SP114 docking station• AC adaptor• 2 x iPhone docking adaptors•
Operating Manual• If any items are missing or damaged, contact your nearest TESCO store for a replacement. Have your receipt ready when you call. Retain the packaging. If you dispose of it, do so having regard to any recycling regulations in your area.
LOCATION
Place the unit on dry stable surface away from heat and damp and where it is unlikely to fall or be knocked over.
GETTING STARTED
CONNECTING POWER
Check that the mains voltage on the rating plate of the AC adaptor is the same as the voltage in your area. Plug the DC cord from the adaptor into the DC jack, plug the mains plug into the wall socket and switch the mains power on. The unit is now ready for use.
NOTE:- The AC adaptor may become warm during operation
- this is normal.
POWER CONTROL To switch the unit on:
Press the • button.
The unit will switch on and the display will light up.
To set the unit to standby:
Press the • button.
The unit will switch o.
2
Loading...
+ 8 hidden pages