This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying this unit.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a slightly damp cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Do not install or operate near any heat sources such as
radiators, stoves, or other apparatus that produce heat.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualied ser vice personnel. Ser vicing is required when the apparatus has been damaged
in any way, such as the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
Warning: To reduce the risk of re or electrical shock, do
not expose this product to rain or moisture. The product
must not be exposed to dripping and splashing and no
object lled with liquids such as a vase of owers should
be placed on the product.
No naked ame sources such as candles should be
placed on the product.
Caution: Changes or modications not expressly approved by the manufacturer could void the user’s authority to operate this device.
Caution: Usage of controls or adjustments or per formance of procedures other than those specied herein
may result in hazardous exposure.
These labels tell you that the unit contains a Laser component. Do not stare at the laser lens.
When the disc tray is open a safety interlock disconnects
power to the laser. Do not defeat this safety interlock
IMPORTANT
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However,this is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, hich can be determined by turning the equipment o and on,the user
is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
BATTERY WARNINGS: The DVD player and the handset
use batteries. There is a risk of re and burns if batteries are
handled improperly. Do not disassemble, crush, puncture,
short external contacts, or dispose of in re or water.
Do not service the internal player battery. Have it examined
(and replaced if needed) by a competent service centre.
Replace the handset battery only with a battery of the
same voltage and type.
Discard used batteries in accordance with recycling regulations in force in your
area.
CONTENTS
INTRODUCTION
SAFETY INFORMATION .............................................................. Inside Front Cover
TThe player may be used with or without the remote monitor. It may be operated
on mains voltage via the supplied AC adaptor, or on a 12VDC supply via the supplied vehicle adaptor.
The Player is set to play Region 2 discs.
The player will accept the following formats (among others): DVD, DVD+R,
DVD+RW, CD-DA, CD, CD-R, CD-RW, Picture CD,
The following formats are not acceptable:
DVD discs with other region codes.
Improperly formatted discs or discs which are not nalized
UNPACKING
The carton should contain:
• The DVD Player
• Remote Monitor
• Remote Control and battery
• Combination AV/DC power cable for the second screen
• 2 Securing Straps for vehicle mounting of the player and the remote monitor
• External Mains Power Adapter
• External 12VDC Vehicle Power supply connector
• Carrying Bag
If any items are missing or damaged, contact your nearest TESCO store for a
replacement. Have your receipt ready when you call. Retain the packaging. If you
dispose of it, do so having regard to any recycling regulations in your area.
Page 1
PLAYER FEATURES
DVD, CD, CD-R, CD-RW DVD+R, DVD+RW capable
TV format: NTSC (Player): PAL (Video Out)
Screen format: Selectable Normal/Widescreen
Video output: Composite Video output
Audio output: Stereo analogue output
DVD features:
Multi Subtitle select
Multi Language select
Multi Angle select
Other features:
On screen display menu
Multi-level zooming
Parental control
JPG picture view
DVD REGION CODES
DVD discs and players are covered by a worldwide
agreement which limits playback of DVD discs to
specic regions as determined by the software
manufacturer. Most DVDs come marked with a
region coding. A disc specied as playable in one
region may not play on a player designed for a different region. A disc specied as universal or with no
region coding (Code 0)may be played in any region.
The regions are:
Region 1: Canada, USA
Region 2: Europe, Japan, Mid. East, South Africa
Region 3: South-East Asia
Region 4: Australia, Caribbean, Central & South
America, New Zealand
Region 5: Africa, Former Soviet Union, India,
North Korea, Pakistan
Region 6: China
THIS PLAYER PLAYS REGION 2 AND REGION FREE ,
UNIVERSAL (0) DISCS.
IMPORTANT NOTE
DVD discs contain various features. Many features are
determined by the program or software content on
the DVD disc itself. Some procedures in this manual
cannot be performed if the disc does not support the
feature. Also, some discs may need special settings
which are unsupported by the player.
GENERAL CAUTIONS
CAUTION: during playback, the disc spins at high
speed, do not lift or move the player, doing so may
damage the disc.
CAUTION: when the player is stopped the disc is still
rotating at a very high speed. Leave the disc to come
to a rest before removing it. Stopping a disc manually
could damage both the disc and the player.
Never press down on the disc compartment lid
especially when a disc is playing.
The player has built in copyright protection technology
that prevents copying from a DVD disc to any media.
If a video recorder is connected to the player, the video
output image will be distorted.
NOTICES
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection
technology must be authorized by Rovi Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trade marks of Dolby
Laboratories.
Page 2
PLAYER CONTROLS AND FUNCTIONS
1). Earphone Jack: Connection for headphones.
Note: Connecting headphones disables the internal speakers.
2). IR Sensor: Receives signals from the remote control.
3). Setup Button: Press to enter/leave the player Setup menu
4). Stop Button: Press once to stop the disc at a given point.
Press again to completely stop the disc.
5). Prev. Button: Skip to previous title, chapter, or track.
6). Next Button: Skip to the next title, chapter, or track.
7). Navigation Controls*: (SeeBelow)
8). Menu Button: Display the root and title menu of the disc.
9). Power On/O Switch: Turn the player on or o.
10). AV Out jack: Connect to the remote monitor, TV or amplier.
11). Power Indicator: Lights when the player is operational
12). DC Output Jack: Connects to the monitor via the AV/DC Cable.
13). Volume control: Adjust the Volume.
14). DC Input Jack: Connect to the AC adapter or Vehicle 12V adapter.
15). Open Button: Opentheunittoputadiscontothetray.
16). Stand: Pull-outtable/desk stand for the player.
* PLAYER NAVIGATION CONTROLS
p Move Up a Menu/Menu Choice
q Move Down a Menu/Menu Choice
IN MENU MODE:u Move along a Menu/Menu Choice
t Move Back in a Menu/Menu Choice
OK Conrm a choice
IN PLAY MODE: uII Press to Play/Pause a disc.
Page 3
REMOTE MONITOR CONTROLS AND FUNCTIONS
1). Power On/O Switch: Turn the monitor ON/OFF
2). Brightness +/-: Adjust the brightness.
3). Volume +/-: Adjust the Volume.
4). Earphone Jack: Connection for headphones.
Note: Connecting headphones disables the internal speakers.
5). AV Input Jack: ConnectstotheAV OutputJackontheDVD Player.
6). DC Input Jack: ConnectstotheDCOutputJackonthe
DVD Player with the special AV and DC Cable.
7). Screw Thread: Attach an optional stand (not supplied)
Page 4
VEHICLE OPERATION
OPERATE THE EQUIPMENT ONLY IN THE REAR PASSENGER COMPARTMENT.
THIS EQUIPMENT MUST ONLY BE CONNECTED TO NEGATIVELY EARTHED 12V DC SUPPLIES.
B
A
DC Out Socket
AV Out Socket
DC In Socket
To vehicle auxiliary (Cigarette lighter) socket
AV In Socket
DC In Socket
AV & POWER CONNECTIONS
A special AV/DC interconnect is supplied. Plug in the cable terminated with three pole 3.5mm jacks to
the AV sockets on the player and the remote monitor.
Connect the DC jack plug of the 12VDC Vehicle Power supply cable to the DC IN socket of the player.
When all the connections are in place and the player and remote monitor are securely tted, plug the
power supply connector into a suitable Accessory (lighter) point in the vehicle.
Connect the DC jack of the mains
adapter to the DC Input Socket
of the player.
Connect the mains adaptor to
the mains point and switch on at
the mains,
The player is now ready for use.
AV CONNECTIONS
You can connect the system to a TV to enjoy the benets of a larger picture.
You will need to purchase an interconnect with a three pole 3.5mm jack on one end and three
RCA phono plugs on the other. This interconnect is often used for games consoles etc.
ConnectthejackplugtothePlayerAVOUTsocketConnecttheYELLOWplugtotheComposite
Video input of the TV. ConnecttheWHITEandREDplugstotheAudioinputsof the TV.
PLAYER PLACEMENT
Carefully swing out the stand to its maximum position.
Place the player as shown on a stable
surface where it cannot get knocked o or
pulled over by the connecting cables.
REMOTE MONITOR PLACEMENT
Although you can connect the remote monitor as shown
on the previous page you shoukl only use the monitor if it
is rmly attached to a suitable table or oor stand. A sturdy
camera tripod or rigid microphone stand is suitable but the
base must be large and heavy enough for stability.
To mains point
DC IN Socket
YELLOW (Video)
WHITE (Left)
RED (Right)
WHEN CONNECTING EQUIPMENT, ENSURE THE
PLAYER AND ALL ANCILLARY EQUIPMENT IS
SWITCHED OFF AND UNPLUGGED AT THE MAINS.
Page 6
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.