Technics SL-PG440 User Manual
Specifications and Main Features
- The make and model of the device is Technics Sleeve SL-PG440
- The device supports a maximum of two audio channels which includes both left and right speakers.
- From the general specifications it can be inferred that the device has a frequency response of 20Hz to 20,000Hz (+1dB).
- The output voltage which can be delivered by the device is approximately 2 V (at 0 dB).
- The maximum dynamic range which can be supported by the device is 92 dB.
- Speaking of the signal-to-noise ratio, the device has a S/N of around 100 dB.
- The total harmonic distortion which can be supported by the device is roughly 0.007 percent at kHz and 0 dB.
- There are limits on Wow and Flutter, and the device does not exceed them.
- The MASH is a part of this device which works as a Digital to Analog Converter and is set to work at one bit.
- The output impedance for this device is approximately around 1 k Ohm.
- For load impedance, the device supports more than 10 k Ohm.
- There is a headphone output in this device, and it can work at a level of up to 15 mW max. at 32 Ohms and adjustable.
- The wavelength which will be picked by the device is 780 nm.
- The power consumption of Technics Sleeve SL-PG440 are as followed:
- For those in Australia and New Zealand: 13 W
- For those in any other country: 14 W
- The power supply specifications are as followed.
- For Australia and New Zealand: AC 50/60 Hz, 230-240 V
- For other countries: AC 50/60 Hz, 110 V/127 V/220 V/240 V.
- The dimension of the device is: 430 mm by 102.6 mm by 283.4 mm.
- The weight of the device is approximately 3.4 kg.
Frequently Asked Questions
Q: What are the power specifications for the Technics SL-PG440?
A: The power specifications for the Technics SL-PG440 is 13 Wat for Australia and New Zealand, and 14 watts for the rest of the world.
Q: Is it possible to program over 20 tracks?
A: No more than 20 tracks can be programmed to play in any order.
Q: Which discs work alongside the SL-PG440?
A: This unit will only accept compact discs which have a COMPACT DIGITAL AUDIO mark stamped on them.
Q: Is there any method to alter the power of the headphone output?
A: Yes the, headphone output can be temporarily lowered from 0 dB down to -12 dB with the output level control on the remote.
Q: In the event that condensation accumulates inside the unit what should be done?
A: As condensation evaporates in dry air, turn on the power and give it around one hour to settle.
Q: Is the SL-PG440 capable of doing random play?
A: Yes, additional device features include a random play option which would enable the device to randomly select tracks which are to be played.
Q: What specific remote control does the SL-PG440 operate on?
A: The remote control transmitter for the SL-PG440 works on two units of UM-4 (AAA) battery.
User Manual
Loading...