TECHNICS SH-EH760 User Manual

Download

System Component

Operating Instructions

Model No. SC-EH760

SC-EH560

The illustrations show SC-EH760 for areas except Australia and N.Z.

EB EP GN

Note

The “EB” indication shown on the outside packing case indicates United Kingdom.

Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.

RQT5355-B

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following systems. These operating instructions, however, fundamentally explain the operation of system SC-EH760. [SC-EH760]: indicates a function which can be enjoyed with

SC-EH760 only.

[SC-EH560]: indicates a function which can be enjoyed with

SC-EH560 only.

Supplied accessories

Please check and identify the supplied accessories.

¸ AC mains lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.

For United Kingdom For Australia and N.Z. (VJA0733) (RJA0035-X)

System

Sound processor

Tuner amplifier

CD changer

CD player

Cassette deck

Front

Speaker Center

Surround

SC-EH760

SH-EH760 SA-EH760 SL-EH760

— RS-EH760 SB-EH760

SB-PC75 SB-PS75

SC-EH560

SH-EH560 SA-EH560

— SL-EH560 RS-EH760 SB-EH560

—

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING.

For others (RJA0019-X)

¸ Remote control transmitter . . . . . . . . . . . . . . . . . . . 1 pc.

[SC-EH760] [SC-EH560]

(RAK-EHA28WH) (RAK-EHA29WH)

¸ Remote control batteries . . . . . . . . . . . . . . . . . . . 2 pcs.

¸ FM indoor antenna . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.

For Australia and N.Z. For others (RSA0007) (RSA0006)

¸ AM loop antenna set (RSA0022-J) . . . . . . . . . . . . . 1 set

RQT5355

CLASS 1 LASER PRODUCT

INVISIBLE LASER RADIATION WHEN OPEN.

DANGER

AVOID DIRECT EXPOSURE TO BEAM. USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE

ADVARSEL

ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING. AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA

VARO!

NÄKYMÄTÖNTÄ LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN. OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH

VARNING

SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN. USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS

ADVARSEL

BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN. UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET.

VORSICHT

NICHT DEM STRAHL AUSSETZEN.

CD changer or CD player (Back of product)

(Inside of product) (Indersiden at apparatet) (Tuotteen sisällä) (Apparatens insida) (Produktets innside) (Im Inneren des Gerätes)

¸ Speaker cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 pcs.

[SC-EH760] [SC-EH560]

(REE0984) (REE0985) (REE0393) (REE0499) (Blue0Black) (Gray0Black) (Red0Black) (Red0Black)

¸ Antenna plug adaptor (SJP9009) . . . . . . . . . . . . . . 1 pc.

(Only for United Kingdom)

Use numbers indicated in parentheses when asking for replacement parts.

Table of contents

Safety precautions

Before use

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . 13

Caution for AC Mains Lead. . . . . . . . . . . . . . . . . 14

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Basic connections. . . . . . . . . . . . . . . . . . . . . . . . 16

Optional antenna connections . . . . . . . . . . . . . . 17

Front panel controls . . . . . . . . . . . . . . . . . . . . . . 18

The remote control . . . . . . . . . . . . . . . . . . . . . . . 10

Setting the time . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Turning DEMO off . . . . . . . . . . . . . . . . . . . . . . . . 11

Saving power in the standby mode . . . . . . . . . . 11

Basic operations

CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

The radio: manual tuning. . . . . . . . . . . . . . . . . . 16

The radio: preset tuning . . . . . . . . . . . . . . . . . . 17

Cassette tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Changing sound field and quality

Changing sound field and quality . . . . . . . . . . . 20

Using the manual equalizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using the acoustic image equalizer (3D AI EQ) . . . . . . . . . . . . 21

Boosting the super woofer . . . . . . . . . . . . . . . . . 21

Enjoying surround sound. . . . . . . . . . . . . . . . . . 22

6CH DISCRETE INPUT [SC-EH760] . . . . . . . . . . . . . . . . . . . . . 24

DOLBY PRO LOGIC [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . . 25

VIRTUAL DOLBY SURROUND [SC-EH560] . . . . . . . . . . . . . . . 26

SUPER SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . 26

SIMULATED STEREO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Surround effects . . . . . . . . . . . . . . . . . . . . . . . . . 27

CENTER FOCUS [SC-EH760] . . . . . . . . . . . . . . . . . . . . . . . . . . 27

VIRTUAL REAR SURROUND [SC-EH760] . . . . . . . . . . . . . . . . 27

MULTI REAR SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . . . 27

3D ENHANCED SURROUND [SC-EH760] . . . . . . . . . . . . . . . . . 27

CENTER EFFECT [SC-EH560] . . . . . . . . . . . . . . . . . . . . . . . . . . 28

SURROUND EFFECT [SC-EH560] . . . . . . . . . . . . . . . . . . . . . . . 28

SEAT POSITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Recording operations

Before recording (Deck 2 only) . . . . . . . . . . . . . 30

Recording CDs . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Recording the radio . . . . . . . . . . . . . . . . . . . . . . 33

Tape-to-tape recording . . . . . . . . . . . . . . . . . . . . 33

Timer operations

Placement

Set the system up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life.

Place it at least 15 cm away from wall surfaces to avoid distortion and unwanted acoustical effects.

Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload the unit and cause a fire.

Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock.

Do not handle the plug with wet hands. This can cause electric shock.

Foreign matter

Do not let metal objects fall inside the unit. This can cause electric shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.

Before use

Using the timers . . . . . . . . . . . . . . . . . . . . . . . . . 34

Convenient functions

Changing the sound range display . . . . . . . . . . 37

Muting the volume. . . . . . . . . . . . . . . . . . . . . . . . 37

Using headphones (not included) . . . . . . . . . . . 37

External unit connections . . . . . . . . . . . . . . . . . 38

Using other equipment . . . . . . . . . . . . . . . . . . . . 39

Enjoy karaoke with CDs and cassettes

(for Australia and N.Z. only) . . . . . . . . . . . . . . 40

Reference

Technical specifications. . . . . . . . . . . . . . . . . . . 41

Troubleshooting guide . . . . . . . . . . . . . . . . . . . . 42

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

RQT5355

Caution for AC Mains Lead

(For United Kingdom)

(“EB” area code model only)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere

Before use

and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark m or the BSI mark o on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.

WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL COLOURED GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

n OR

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A

If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red.

Figure B

2. Replace the fuse and close or attach the fuse cover.

Figure A

Figure B

Fuse cover

Fuse (5 ampere)

RQT5355

Installation

Locating the components

Front speaker (L) (SB-EH760/560)

CD changer (SL-EH760) or CD player (SL-EH560)

Cassette deck (RS-EH760)

Sound processor (SH-EH760/560)

Tuner amplifier (SA-EH760/560)

CD changer (SL-EH760) or CD player (SL-EH560)

Cassette deck (RS-EH760)

Sound processor (SH-EH760/560)

Tuner amplifier (SA-EH760/560)

Front speaker (R) (SB-EH760/560)

[A] Side-by-side set-up [B] Stacking

Note

³Do not put the CD changer or CD player on the tuner amplifier. Heat

from the tuner amplifier can damage your CDs.

³Left and right front speakers are exactly the same.

Use only the supplied speakers.

The combination of the system and the speakers provides the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.

Caution

³Use the speakers only with the recommended system.

Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

³Do not attempt to attach these speakers to walls using

methods other than those described in this manual.

Placement of center/surround

speakers

SC-EH760

Before use

a Center speaker

(SB-PC75)

Front speaker (left)

(SB-EH760)

30° 30°

Front view Front view

b Surround

speaker (left)

(SB-PS75)

¤The front, center, and surround speakers should be

placed at approximately the same distance from the listening position. The angles in the diagram are approximate.

Listening position

120°

Front speaker (right)

(SB-EH760)

c Surround

100 mm

30–35 mm

Ø7.5~9.5

7–9 mm

speaker (right)

(SB-PS75)

Center speaker

Place the center speaker (a) directly above the television.

Surround speakers

Place the surround speakers (b, c) either side of the listening position, or slightly to the rear, about 1 meter higher than ear level. Place the speakers with the Technics logo facing toward the listening position. However the position should be adjusted to your personal preference, because the effect varies to some degree depending upon the type of music and the music source.

Note

If you are unable to position the surround speakers as recommended, you can put them near the front speakers and still achieve a surround-like effect (➡ page 27, “VIRTUAL REAR SURROUND”).

[D] Attaching to a wall

Set speaker onto screws and slide through bracket to lock into position.

Note

The wall or pillar on which the speaker systems are to be attached should be capable of supporting 5 kg.

If irregular coloring occurs on your television

Turn the television off for about 30 minutes.

The television’s demagnetizing function should correct the problem. If it persists, move the speakers further away from the television.

RQT5355

Basic connections

Before use

(Right)

Adhesive tape

(Left)

To household mains socket

(Left)

The illustrations show SC-EH760 for areas except Australia and N.Z.

To connect cables

Connector

(For Australia and N.Z.)

FM ANT

75∞

GND

(For others)

FM ANT

75∞

To unplug cables

Hold the connector from both ends and pull it out.

White line

(For Australia and N.Z.)

(For others)

(Right)

Speaker side

Tuner amplifier side

LOW MID

HIGH

LOW MID

Black (j)

HF MF LF

Appliance inlet

HIGH

Red

Black (j)

Gray (i)

(i)

Gray (i)

Red

Connector

Blue

(i)

RQT5355

Approx. 6 mm

EXT

LOOP

AM ANT

5–12m

Optional antenna connections

Before connection

³Do not connect the AC mains lead until all other connections

are complete.

³To prepare the AM loop antenna and speaker cables (and

FM antenna for Australia and N.Z.), twist the vinyl tip and pull off ([A]).

1 Flat cables.

Keep the cables as flat as possible against the back of the unit.

Note

Connect the black connectors to the black terminals and the blue connector to the blue terminal. Incorrect connection of the flat cables can damage the unit.

2 FM antenna.

Fix the other end of the antenna where reception is best.

3 AM loop antenna.

1 Attach the antenna holder to the rear panel of the CD

changer or CD player. Then clamp the antenna into the antenna holder.

2 Connect the antenna terminal to the rear panel of the tuner

amplifier.

Keep loose antenna cord away from other wires and cords.

4 Front (L/R) speaker cables.

Connect the cables to the terminals of the same color.

Note

³To prevent damage to circuitry, never short-circuit positive

(i) and negative (j) speaker wires.

³Be sure to connect only positive (red, blue or gray) wires to

positive (i) terminals and negative (black) wires to negative (j) terminals.

5 [SC-EH760]

Surround and center speaker cables.

(For United Kingdom only) BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE PROCEEDING TO STEP 6.

6 AC mains lead.

Insertion of connector

Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing. However there is no problem using the unit.

Use outdoor antennas if radio reception is poor.

FM outdoor antenna

Note

³Disconnect the FM indoor antenna. ³The antenna should be installed by a competent technician.

FM outdoor antenna

Tuner amplifier

(For Australia and N.Z.)

FM ANT

75∞

GND

AM ANT

LOOP EXT

1 Remove a piece of the outer vinyl

insulator.

30mm

2 Twist the shield braid to expose the

core wire.

Shield braid

(For others)

75∞

FM ANT AM ANT

LOOP EXT

(United Kingdom only)

15mm

Core wire

75  coaxial cable (not included)

Use the antenna plug adaptor (included).

AM outdoor antenna

Run a piece of vinyl wire horizontally across a window or other convenient location.

Before use

Note

The included AC mains lead is for use with this unit only. Do not use it with other equipment.

For your reference:

Information you enter into the unit’s memory, except for time, remains intact for up to two weeks after the mains lead is disconnected.

Note

³Leave the loop antenna connected. ³Disconnect the antenna when the unit is not in use. Do not use the

antenna during an electrical storm.

AM outdoor antenna

Tuner amplifier

RQT5355

Front panel controls

SC-EH760

Before use

SC-EH560

SC-EH760

5 67 8 9 ;:3 41 2

PLAY/œREC

MODE

H/I

CLOCK/TIMER

PHONES

INPUT SELECTOR TUNER/BAND

FM AUTO/

6CH

MONO

DISCRETE INPUT

DEMO

TUNING MODE SET KARAOKE ECHO

TUNING

< = > B? @ A

5 6 8 9 ;:3 41 2

PLAY/œREC

MODE

H/I

CLOCK/TIMER

PHONES

< = > ?

FM AUTO/

DEMO

MONO

TUNING MODE SET

INPUT SELECTOR TUNER/BAND

TUNING

DISP MODE

RDS

PTYPS

C GD FE H

DOWN

DIGITAL

S.WOOFER

MIC

1 2

S.WOOFER

Tuner amplifier

1 Standby/on switch (ê/I) . . . . . . . . . . . . . . . . . . . . . . 11, 34, 35

VOLUME

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Standby indicator (ê)

When the unit is connected to the AC mains supply, this indicator

MIC VOL

MIN MAX

lights up in standby mode and goes out when the unit is turned on.

3 Play timer/record timer button and indicator

(FPLAY/FREC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35

4 ECO mode button (MODE) . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5 Clock/timer, demo button

(CLOCK/TIMER, –DEMO) . . . . . . . . . . . . . . . . . . . . .11, 34–36

6 FM mode button (FM AUTO/MONO) . . . . . . . . . . . . . . . . . . 16

7 [SC-EH760]

6ch discrete input button (6CH DISCRETE INPUT) . . . . . . 24

8 Source input button (INPUT SELECTOR) . . . . . . . . . . . . . . 39

9 Tuner/band button (TUNER/BAND) . . . . . . . . . . . . . . . . . . . 16

: [SC-EH760]

Digital super woofer button and indicator

(DIGITAL S.WOOFER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

[SC-EH560]

VOLUME

Super woofer button and indicator (S.WOOFER) . . . . . . . 21

; Volume control (VOLUME) . . . . . . . . . . . . . . . . . . . . 12, 16, 18

< Headphone jack (PHONES) . . . . . . . . . . . . . . . . . . . . . . . . . 37

= Tuning mode button (TUNING MODE) . . . . . . . . . . . . . . . . 16

> Set button (SET) . . . . . . . . . . . . . . . . . . . . . . . . . 11, 17, 34, 35

? Tuning buttons (X, W TUNING) . . . . . . . . . . . . . 11, 16, 34, 35

@ [SC-EH760\for\areas\except\Australia\and\N.Z.]

[SC-EH560\for\areas\except\United\Kingdom]

RDS display mode buttons

(RDS, PS–DISP MODE–PTY) . . . . . . . . . . . . . . . . . . . . . . . . 16

[SC-EH760\for\Australia\and\N.Z.]

KARAOKE and echo buttons (KARAOKE, ECHO) . . . . . . 40

A [SC-EH760\for\Australia\and\N.Z.]

Microphone jacks (MIC, 1, 2) . . . . . . . . . . . . . . . . . . . . . . . . 40

B [SC-EH760\for\Australia\and\N.Z.]

Microphone volume control (MIC VOL) . . . . . . . . . . . . . . . 40

DISC

SC-EH560

DIRECT OPEN

DISC 1DISC

REPEAT

EDIT

RANDOM

DISC 3DISC 4DISC

J K ML

D FE H

RANDOM REPEAT EDIT

J K ML

CD changer/CD player

OPEN/CLOSE



M N

»

C [SC-EH760]

Disc select buttons and indicators (DISC, 1–5) . . . . . . . . . 12

Green: Indicates that the tray is ready to play its CD or to be opened.

D Random play button (RANDOM) . . . . . . . . . . . . . . . . . . . . . 15

E Repeat button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

F CD edit button (EDIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

G [SC-EH760]

Disc direct open buttons

(DIRECT OPEN, DISC 1– DISC 5) . . . . . . . . . . . . . . . . . . . . . 12

H Disc tray open/close button (< OPEN/CLOSE) . . . . . . . . . 12

I Skip/search buttons (4, 5) . . . . . . . . . . . . . . 13

J Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

K Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

L Pause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

M Play button and indicator (!) . . . . . . . . . . . . . . . . . . . . 12, 32

OPEN/CLOSE



M N

»

The color of the indicator depends on the operation taking place. If stopped: orange If playing: green If paused: flashes

RQT5355

SC-EH760

Front panel controls

PO Q RN

Cassette deck

N Deck 1 cassette holder open button (< OPEN) . . . . . . . . . 18

O Deck 1 cassette holder

P Fast forward/rewind buttons (6, 5) . . . . . . . . . . . . . . . 19

Q Deck 2 cassette holder

OPEN

DECK 1/2

COUNTER

DISPLAY

RESET

DOLBY NR

REV MODE TAPE EDIT

OPEN

REC

PAUSE

T WX ZYU VS

R Deck 2 cassette holder open button (< OPEN) . . . . . . 18, 31

S Counter reset, display buttons

(COUNTER, RESET, DISPLAY) . . . . . . . . . . . . . . . . . . . . . . 30

T Deck 1/deck 2 select button (DECK 1/2) . . . . . . . . . . . . 18, 19

U Playback buttons and indicators (", !) . . . . . . . . 18, 32, 33

The color of the indicators depends on the operation taking place. If stopped, fast forwarding or rewinding: orange If playing or recording: green While carrying out TPS or recording is on standby: flashes

V Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 32

W Dolby noise reduction button (DOLBY NR) . . . . . . . . . 18, 31

X Reverse mode button (REV MODE) . . . . . . . . . . . . . . . . 18, 31

Y Tape edit button (TAPE EDIT) . . . . . . . . . . . . . . . . . . . . . . . 33

Z Record pause button (´ REC PAUSE) . . . . . . . . . . . . . 32, 33

Before use

DISPLAY MODE

SC-EH560

DISPLAY MODE

UV DEMO

[ ^]\

PRO LOGIC

OFF/ON

SURROUND

FOCUS

DSP CONTROL

SURROUND

CENTER

VIRTUAL REAR

SUPER

_ ` a b d ec

[ f g]\

DSP CONTROL

CENTER EFFECT

VIRTUAL

DOLBY SURROUND

SIMULATED

STEREO

h i j ek

MULTI REAR SURROUND

SURROUND

EFFECT

3D ENHANCED

SURROUND

SEAT

POSITION

Sound processor

3D AI EQ/

M.EQ BAND

MULTI JOG

SEAT

POSITION

[ [SC-EH760]

Display mode button (DISPLAY MODE) . . . . . . . . . . . . . . . 37

[SC-EH560]

Display mode, virtual speaker demo button

(DISPLAY MODE, –ëV DEMO) . . . . . . . . . . . . . . . . . . . 26, 37

\ Display ] 3D AI EQ, M.EQ BAND button

(3D AI EQ/M.EQ BAND) . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21

^ [SC-EH760]

Jog control and joystick (MULTI JOG) . . . . . . . . . . . . . 20, 21

_ [SC-EH760]

DOLBY PRO LOGIC button and indicator

(ë PRO LOGIC, OFF/ON) . . . . . . . . . . . . . . . . . . . . . . . . . . 25

` [SC-EH760]

Super surround button and indicator

(SUPER SURROUND) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

a [SC-EH760]

Center focus button and indicator (CENTER FOCUS) . . . 27

b [SC-EH760]

3D AI EQ/

M.EQ BAND

MULTI CONTROL

Virtual rear surround button and indicator

(VIRTUAL REAR SURROUND) . . . . . . . . . . . . . . . . . . . . . . . 27

c [SC-EH760]

Multi rear surround button and indicator

(MULTI REAR SURROUND) . . . . . . . . . . . . . . . . . . . . . . . . . 27

d [SC-EH760]

3D ENHANCED SURROUND button and indicator

(3D ENHANCED SURROUND) . . . . . . . . . . . . . . . . . . . . . . . 27

e Seat position button and indicator

(SEAT POSITION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

f [SC-EH560]

Multi control buttons

(2, 1, 3, 4 MULTI CONTROL) . . . . . . . . . . . . . . . . . . 20, 21

g [SC-EH560]

EQ button (EQ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21

h [SC-EH560]

Virtual Dolby Surround button and indicator

(VIRTUAL DOLBY SURROUND) . . . . . . . . . . . . . . . . . . . . . . 26

i [SC-EH560]

Simulated stereo button and indicator

(SIMULATED STEREO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

j [SC-EH560]

Center effect button and indicator

(CENTER EFFECT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

k [SC-EH560]

Surround effect button and indicator

(SURROUND EFFECT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

RQT5355

Before use

]

_ h

;

SLEEP

PROGRAM

1 2 3

4 5 6

7 8 9 0

3D AI EQ/M.EQ BAND

CH SELECT

PRO LOGIC DIGITAL

TEST

VCR/AUX/ 6CH INPUT

MUTING

∂ VOLUME µ

SUPER

SURROUND

TAPE/

DECK 1/2

M N

⁄/g ¤ ¤»

CANCEL

DISC

j/-/--

AV EFFECT

S.WOOFER

TUNER/

BAND

` i

{ }

The remote control

Controls

Buttons 1, 9–;, ], _, ` and g–i function in the same way as the controls on the main unit.

l Sleep timer button (SLEEP) . . . . . . . . . . . . . . . . . . . . . . . . . 36

m Numbered buttons (1–9, 0, M) . . . . . . . . . . . . 14, 15, 17

n Cursor buttons (2, 1, 3, 4) . . . . . . . . . . . . . . . . . . . . 20, 21

o [SC-EH760]

Channel select button (CH SELECT) . . . . . . . . . . . . . . . 24, 26

p [SC-EH760]

Test button (TEST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

q [SC-EH760]

Input select button (VCR/AUX/6CH INPUT) . . . . . . . . . 24, 39

[SC-EH560]

VCR button (VCR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

r TAPE select, deck 1/deck 2 select button

(TAPE/DECK 1/2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19

s CD pause/Tape reverse playback button

(2/;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 18, 32, 33

t Muting button (MUTING) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

u Program button (PROGRAM) . . . . . . . . . . . . . . . . . . . . . . . . 14

v Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

w [SC-EH760]

Disc button (DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15

x EQ button (EQ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 21

y AV effect button (AV EFFECT) . . . . . . . . . . . . . . . . . . . . 27–29

z CD button (CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15

{ CD play/tape forward playback button

(1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14, 18, 32, 33

| CD/tape stop button (º) . . . . . . . . . . . . . . . . . . . . . . 13, 18, 32

} CD skip/search, tape fast forward/rewind buttons

(4, 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 19

Tuner amplifier

30° 30°

R6/LR6 AA,UM-3

Batteries

³Insert so the poles (i and j) match those in the remote control. ³Do not use rechargeable type batteries.

Do not;

³mix old and new batteries. ³use different types at the same time. ³heat or expose to flame. ³take apart or short circuit. ³attempt to recharge alkaline or manganese batteries. ³use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. Replace if the unit does not respond to the remote control even when held close to the front panel.

If the battery lid comes loose, slide it back into place horizontally.

Use

Aim at the sensor, avoiding obstacles, at a maximum range of 7 meters directly in front of the unit.

³Keep the transmission window and the unit’s sensor free from dust. ³Operation can be affected by strong light sources, such as direct

sunlight, and the glass doors on cabinets.

Do not;

³put heavy objects on the remote control. ³take the remote control apart. ³spill liquids onto the remote control.

RQT5355

Setting the time

This is a 24-hour clock. The example shows how to set the clock for 16:25 (4:25 p.m.).

1 2 32

H/I

CLOCK/TIMER

DEMO

SET

1 Press [ê/I] to turn the unit on. 2 1 Press [CLOCK/TIMER, –DEMO] to

display “CLOCK”.

Each time you press the button: CLOCK>FPLAY>FREC>Original display

^-------------------------------------------------------------------}

2 Within 7 seconds

Press [SET].

3 1 Press [TUNING (X or W)] to set the

time.

The time display can be changed in one minute units by tapping the buttons, and quickly by holding down the buttons.

2 Press [SET].

The time is set and the original display is restored.

Displaying the clock

Press [CLOCK/TIMER, –DEMO]. The clock is shown for about 5 seconds.

Turning DEMO off

A demonstration of the display is shown if you have not set the clock. Turn DEMO off to get the most from ECO mode.

Before use

TUNING

SET

CLOCK/TIMER

DEMO

MODE

While the unit is on:

Press and hold [CLOCK/TIMER, –DEMO] until “NO DEMO” is displayed.

Each time you press and hold the button: NO DEMO (off)bDEMO (on)

Saving power in the standby

mode

Set the unit to reduce energy consumption in the standby mode (11 W>0.5 W).

While the unit is on:

1 Press [MODE].

The current mode is displayed.

2 Within 5 seconds

Press [MODE] to display “ECO”.

Each time you press the button: NORMAL (off)bECO (on)

ECO: The clock is not displayed in the standby mode. The “ê” and

“FPLAY/FREC” indicators still light.

MODE

Note

The mode can be switched to ECO when the unit is in standby but it cannot be switched back to NORMAL.

RQT5355

CDs

Normal play

SC-EH760

DISC 1–5

SC-EH560

Basic operations

SC-EH760

DISC 1 DISC 2

H/I

DIRECT OPEN

DISC 3 DISC 4 DISC 5



1 2 3



SC-EH560

OPEN/CLOSE

Preparation: Press [ê/I] to turn the unit on.

[SC-EH760]

1 Press [DIRECT OPEN] ([DISC 1]–

[DISC 5]) to open a tray and set a CD.

2 Press [< OPEN/CLOSE] to close the

tray.

Repeat steps 1 and 2 to load the other trays.

3 Press [!] to start play.

Play starts from the first track on the disc in the play position and finishes at the end of the last track on the final disc (see below). You can start play from another disc by pressing [DISC 1–5].

4 Adjust the volume.

Note

You can not change CDs while a disc is playing.

What is meant by “final disc”?

For example, if play starts from disc 4, disc 3 will be the “final disc”.

Order of progression:

Disc 4>5>1>2>3

[SC-EH560]

OPEN/CLOSE

Label must face upward

SC-EH760

SC-EH560

DISC

Disc number

Track number

DISC

Total number of tracks

1 Press [< OPEN/CLOSE] to open the

tray and set a CD.

2 Press [< OPEN/CLOSE] to close the

tray.

3 Press [!] to start play. 4 Adjust the volume.

Total playing time

Elapsed play time

RQT5355

DOWN

VOLUME

CDs

To stop the disc

Press [º].

To pause play

M, N



»

Press [;] during play. The “!” indicator flashes. Press [;] or [!] to resume play.

Skipping tracks

Press [4] (backward), or [5] (forward).

twice once

Track Track Track

[

Searching through tracks

During play Press and hold [4] (backward), or [5] (forward).

Play position

once twice

][

]

“NO DISC” is displayed

When the unit is in CD mode but a disc isn’t in the playing position (SC-EH760) or in the player (SC-EH560).

Note

³Skipping is done in the selected order in program play (➡ page 14). ³You cannot skip to tracks already played in random play

(➡ page 15).

³You can search only within tracks in program and random play.

CD selection

Choose discs with this mark (a).

Do not;

³use irregularly shaped discs (b). ³attach extra labels and stickers. ³use discs with labels and stickers that are coming off or with adhe-

sive exuding from under labels and stickers (c).

³attach scratch-proof covers or any other kind of accessory. ³write anything on the CD. ³clean CDs with liquids. (Wipe with a soft, dry cloth.) ³use CDs printed with label printers available on the market.

To prevent damage

Always observe the following points.

³Load only 1 CD per tray (d). ³Load CDs as shown in figure (e).

An adaptor is not needed with 8 cm CDs (singles).

³Set the system on a flat, level surface. ³Always unload all CDs before moving the system.

Basic operations

8cm CD

12cm CD

Do not;

³set it on top of magazines, inclined surfaces, etc. ³move the system while tray is opening/closing, or when loaded. ³put anything except CDs in trays. ³use cleaning CDs or CDs which are badly warped or cracked.

RQT5355

PROGRAM

SLEEP

123

456

7890

3D AI EQ/M.EQ BAND

CH SELECT

TEST

VCR/AUX/ 6CH INPUT

DECK 1/2

MUTING

∂ VOLUME µ

AV EFFECT

SUPER

PRO LOGIC DIGITAL

S.WOOFER

SURROUND

TAPE/

⁄/g¤ ¤»

CANCEL

DISC

j/-/--

TUNER/

BAND

1 2

3 4

CDs

Program play

Select up to 24 tracks to play in the order you choose.

Remote control only Preparation:

Press [CD] to put the unit in CD mode.

1 Press [PROGRAM]. 2 [SC-EH760]

Press [DISC].

3 [SC-EH760]

Within 10 seconds or so

Press [1] –[5] to select the disc.

PROGRAM

SC-EH760

DISC

Basic operations

SC-EH760

123

456

7890

¤

PROGRAM

j/-/--

»

Programmed track no.

PROGRAM

SLEEP

123

456

7890

3D AI EQ/M.EQ BAND

PRO LOGIC DIGITAL

SUPER

SURROUND

TAPE/

DECK 1/2

⁄/g¤ ¤»

AV EFFECT

CH SELECT

TEST

VCR/AUX/ 6CH INPUT

MUTING

∂ VOLUME µ

DISC

DISC PRGM

Total playing time

DISC PRGM

CANCEL

j/-/--

S.WOOFER

TUNER/

DISC

BAND

CANCEL

M, N

PRGM

Programmed order

4 Select the track with the numbered

buttons.

For tracks numbered 10 and over, press [L] then the two digits. Repeat steps 2 through 4 (SC-EH760) or step 4 (SC-EH560) to program the tracks in the required order. The total playing time of the programmed tracks is displayed.

5 Press [1].

All the tracks are played in the selected order.

[A] To cancel

Press [PROGRAM]. “CLEAR” is displayed and all the tracks are canceled. If a track was playing, play continues to the end of the disc.

“FULL” is displayed

If 24 tracks have been programmed.

“––:––” is displayed if;

³total playing time for the tracks is over 99 minutes and 59 seconds. ³a track numbered 25 or over was programmed. ³a disc not in playing position was programmed (SC-EH760).

Tracks can still be programmed and played.

[A] To check the contents of the program

1 Press [CANCEL]. “CANCEL” will light. 2 Press [4] or [5]. Each time you press the button,

the disc numbers (SC-EH760), track numbers and program positions are displayed.

3 After the playing time appears on the display, press [CANCEL].

“CANCEL” goes out.

To add to the end of the program

Repeat steps 2 through 4 (SC-EH760) or step 4 (SC-EH560).

[A] To cancel tracks

1. Press [CANCEL].

A particular track

All tracks

To program the track you are listening to

Press [PROGRAM]. The program mode engages and the current track is automatically recorded as program No. 1.

2. Select the track with [4] or [5] then press [CANCEL].

3. Press [CANCEL] again.

Press [PROGRAM] or [º] while stopped.

RQT5355

PROGRAM

SLEEP

123

456

7890

3D AI EQ/M.EQ BAND

CH SELECT

TEST

VCR/AUX/ 6CH INPUT

DECK 1/2

CANCEL

AV EFFECT

PRO LOGIC DIGITAL

SUPER

S.WOOFER

SURROUND

TAPE/

⁄/g¤ ¤»

DISC

j/-/--

TUNER/

BAND

1 2

CDs

Other modes of play

Preparation: Press [CD] on the remote control or [INPUT

SELECTOR] on the tuner amplifier to select “CD”.

Direct access play

[SC-EH760]

Starts normal play from a selected track on a selected disc to the last track of the final disc (➡ page 12).

[SC-EH560]

Starts normal play from a selected track to the last track.

SC-EH760

SC-EH560

DISC

123

456

7890

INPUT SELECTOR

RANDOM

j/-/--

REPEAT

RANDOM REPEAT

DISC

1 [SC-EH760]

Remote control only

Press [DISC].

2 [SC-EH760]

DISC

Within 10 seconds or so

Press [1] –[5] to select the disc.

Basic operations

3 Select the track with the numbered

buttons.

DISC



For tracks numbered 10 and over, press [L] then the two digits.

Random play

[SC-EH760]

Plays the tracks of all discs once each in random order.

[SC-EH560]

Plays the tracks once each in random order.

Press [RANDOM].

To cancel

Press [RANDOM]. “RANDOM” goes out.

For your reference:

In the program play mode (➡ page 14), the programmed tracks are played randomly.

Repeat play

[SC-EH760]

Repeats all tracks on all discs or all programmed tracks.

[SC-EH560]

Repeats all tracks or programmed tracks.

SC-EH760

RANDOM

SC-EH760 SC-EH560

REPEAT

SC-EH560

RANDOM

REPEAT

Press [REPEAT] before or during play.

DISC

RANDOM

DISC

To cancel

Press [REPEAT]. “`” goes out.

To repeat only your favorite track(s)

1 Program the track(s) you want (➡ page 14). 2 Press [REPEAT] and make sure “`” is displayed. 3 Press [!]. Play will start.

RQT5355

H/I

TUNER/BAND

FM AUTO/

MONO

DISP MODE

1 42 3

RDS

The radio: manual tuning

Radio stations can be tuned manually by selecting the station’s frequency or they can be preset into channels to make it easy to tune with the tuner amplifier or the remote control (➡ page 17).

Preparation: Press [ê/I] to turn the unit on.

1 Press [TUNER/BAND] to select FM or

AM.

Each time you press the button: FMcAM

2 Press [TUNING MODE] to select

“MANUAL”.

Each time you press the button: MANUALcPRESET

3 Press [TUNING (X or W)] to tune in the

PTYPS

MHz

desired broadcast.

“TUNED” is displayed when a radio station is tuned. “ST” is displayed when a stereo FM broadcast is being received.

4 Adjust the volume.

TUNING MODE

Basic operations

VOLUME

DOWN

FM AUTO/

MONO

PS PTY

NEWS VARIED FINANCE COUNTRY AFFAIRS POP M CHILDREN NATIONAL INFO ROCK M SOCIAL A OLDIES SPORT M.O.R M EDUCATE LIGHT M PHONE IN DOCUMENT DRAMA CLASSICS TRAVEL TEST CULTURE OTHER M LEISURE ALARM SCIENCE WEATHER JAZZ

TUNING

RDS

DISP MODE

PTY displays

TUNED

RDS PS

TUNED

RDS PTY

RELIGION FOLK M

MHz

MONO

MHz

Auto tuning

Press and hold [TUNING (X or W)] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station.

³When there is excessive interference, auto tuning may not function. ³To cancel auto tuning, press [TUNING (X or W)] once again.

If noise is excessive in FM

Press [FM AUTO/MONO] to display “MONO.”

This mode improves sound quality if reception is weak for some reason but broadcasts are heard in monaural. Press [FM AUTO/MONO] again to cancel the mode. “MONO” goes out. MONO is also canceled if the frequency is changed.

Turn off “MONO” for normal listening. Stereo and monaural broadcasts are automatically played as they are received.

Stations can be preset in monaural. Carry out presetting manually (➡ page 17).

RDS broadcasting

[SC-EH760\for\areas\except\Australia\and\N.Z.]

[SC-EH560\for\areas\except\United\Kingdom]

This unit can display the text data transmitted by the radio data system (RDS) available in some areas. If the station you are listening to is transmitting RDS signals, “RDS” will light up on the display.

Displaying the name of a broadcasting station

Press [PS-DISP MODE] to display a station name. Press [DISP MODE-PTY] to display a program type. Each time you press the button: Frequency displaycPS or PTY display

If the PS display isn’t shown

Press and hold [PS-DISP MODE] for about 4 seconds. The mode switches every time the button is pressed and held: MODE 1cMODE 2

Note

RDS displays may not be available if reception is poor.

RQT5355

“M.O.R M”l“Middle of the road music”.

TUNING MODE

SET

342

SET

The radio: preset tuning

Choose either automatic presetting, which presets all the stations the tuner amplifier can receive, or manual presetting, which allows you to select the stations to preset and the order they are to be preset in. There are 39 channels available for presetting.

Automatic presetting

Do the following once each for FM and AM.

Preparation: Tune to the frequency presetting is to begin at

(➡ page 16).

Hold down [SET].

Release the button when “AUTO MEMORY” appears. The tuner presets all the stations it can receive into the channels in ascending order. FM stations are preset into channels 1 to 39, and AM stations are preset into channels 21 to 39. “SET OK” is shown when presetting is complete and the last station to be preset is played.

MHz

“ERROR” is displayed if the tuner doesn’t receive any stations. Do presetting manually if this happens (see below).

2 3

SET

TUNING

CH SELECT

VCR/AUX/ 6CH INPUT

SLEEP

CANCEL

PROGRAM

123

456

7890

3D AI EQ/M.EQ BAND

TEST

MUTING

∂ VOLUME µ

AV EFFECT

SUPER

PRO LOGIC DIGITAL

SURROUND

TAPE/

DECK 1/2

⁄/g¤ ¤»

j/-/--

S.WOOFER

DISC

TUNER/ BAND

1 3

Note

AM stations replace any FM channels that were preset in channels 21 to 39.

Manual presetting

Preset the stations one at a time.

1 Tune to the required station. 2 Press [SET]. 3 Press [TUNING (X or W)] to select a

channel.

4 Press [SET].

The station occupying a channel is erased if another station is preset in that channel.

Selecting channels

On the remote control

1 Press [TUNER/BAND]. 2 Press the numbered buttons to select

the channel.

For channels 1 to 9 press the corresponding number. For channels 10 or over press [L], then the two digits. e.g. To select channel 21 [L]>[2]>[1]

Basic operations

TUNER/

BAND

123

456

7890

∂ VOLUME µ

j/-/--

Preset channel

3 Adjust the volume.

On the main unit

1 Select “PRESET” with [TUNING MODE]. 2 Press [TUNING (X or W)] to select the channel.

RQT5355

DECK 1/2

H/I

Cassette tapes

Preparation: Press [ê/I] to turn the unit on.

1 Press [< OPEN] on deck 1 or deck 2

324 11

and insert the cassette.

2 Press [DOLBY NR] to select Dolby NR

(“ëNR” appears) or off.

(➡ “Dolby noise reduction” page 19)

3 Press [REV MODE] to select the re-

verse mode.

Each time you press the button:

h: One side is played. d: Both sides are played. f: Both sides are played 8 times each.

4 Press ["] (reverse side) or [!] (forward side).

Play begins and the indicator changes to green.

5 Adjust the volume.

Basic operations

OPEN

DOLBY NR

REV MODE

To stop the tape

Press [º].

[A] To change the deck to be used

Forward side Tape facing down

Î

ÎNR1

Tape direction

Press [DECK 1/2] to select the deck you want to play.

To listen to 2 tapes consecutively

Insert a tape into each deck and select “f”. Both tapes will be played 8 times each.

Cassette tape selection and care

The unit can correctly play the following types. It identifies the type automatically.

Normal position/TYPE I ✔ High position/TYPE II ✔ Metal position/TYPE IV ✔

³Tapes exceeding 100 minutes are thin and can break or get caught

in the mechanism.

³Tape slack can get caught up in the mechanism and should be tak-

en up before the tape is played.

³Endless tapes can get caught up in the deck’s moving parts if used

incorrectly. Use tapes appropriate to this unit’s auto-reverse mechanism.

RQT5355

DOWN

DECK 1/2

VOLUME

Deck in use

ÎNR

DECK 1/2

F, G

Cassette tapes

Fast-forwarding and rewinding

Press [6] or [5] while the tape is stopped.

Tape direction rewind fast-forward

!65

"56

For your reference:

³Each deck’s play direction is stored in the system’s memory. ³You can fast forward or rewind the tape while you are playing or

recording a tape in another deck. Press [DECK 1/2] to switch to the non playing deck, and then press [6] or [5]. After the above operation, be sure to press [DECK 1/2] to reselect the deck in which you are playing a tape.

Tape program sensor (TPS)

TPS finds the beginning of a track and resumes play from there.

Press [6] or [5] during play.

Tape direction backward forward

!65

"56

Basic operations

Note

TPS may not operate correctly in the following situations: If the interval between tracks is less than 4 seconds. If there is noise between tracks. If there are silent parts within tracks.

Dolby noise reduction

Dolby NR reduces “hissing” when playing tapes. It increases the high frequency region when recording and then reduces it in playback. Use the same system during playback and recording. This unit has Dolby B NR which reduces noise to a third. Prerecorded cassettes and equipment marked “ë” use Dolby B NR.

Dolby noise reduction manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

RQT5355

FLAT HEAVY CLEAR

AI-EQ M.EQ

HALL

FLAT HEAVY CLEAR HALL AI-EQ M.EQ

SC-EH760

SC-EH560

SC-EH760

MULTI JOG

SC-EH560

MULTI JOG

(On the tuner amplifier)

(On the sound processor)

SC-EH760

SC-EH560

Changing sound field and

quality

Changes to sound field and quality have no effect on recordings.

[SC-EH760]

Turn [MULTI JOG] to select a setting.

[SC-EH560]

Press [EQ] to select a setting.

Each time you turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560): HEAVY: Adds punch to rock. CLEAR: Clarifies higher sounds. HALL: Expands sound to make you feel like you were in a hall. AI-EQ: Adjust sound with the acoustic image equalizer

M.EQ: Create your own effects (➡ see below). FLAT: Canceled (no effect is added).

On the remote control

Press [EQ].

Note

Turn off the effect if sound quality reduces when using HALL or 3D AI EQ with a source.

(➡ page 21).

Using the manual equalizer

Changing sound field and quality

1 1

MULTI JOG

3D AI EQ/

M.EQ BAND

MULTI JOG

FLAT HEAVY CLEAR

MULTI

CONTROL

LOW

(On the sound processor)

FLAT HEAVY CLEAR

(On the tuner amplifier)

(On the sound processor)

MID

HIGH

HALL AI-EQ M.EQ

Create your own sound quality effects.

1 [SC-EH760]

Turn [MULTI JOG] to select “M.EQ”.

[SC-EH560]

Press [EQ] to select “M.EQ”.

HALL AI-EQ M.EQ

2 Press [3D AI EQ/M.EQ BAND] to se-

lect the band.

Each time you press the button: LOW>MID>HIGH

^------------------------}

3 Use [", !, #, $] to make the re-

quired curve.

1 Select the frequency you want to use as the peak with [",

!].

2 Adjust the level of the peak with [#, $].

³Adjacent frequencies are adjusted at the same time to

maintain a smooth curve.

³When you have adjusted the curve, you can move the

peak of the curve by pressing [", !] (a).

Repeat steps 2 and 3 to adjust the three bands. The original display is restored on the display panel in about 5 seconds.

To cancel

Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select “FLAT”.

Note

³The changes you make are stored and automatically recalled the

next time you select “M.EQ”.

³After making a curve in one band, any adjustments in another band

make a curve that is a combination of the two.

[C] To flatten the curves in all three bands

Set the frequencies b in LOW, c in MID, and d in HIGH to flat.

RQT5355

FLAT HEAVY CLEAR

b c d

HALL AI-EQ M.EQ

SC-EH760

SC-EH560

SC-EH760 SC-EH560

MULTI JOG

Changing sound field and quality

Using the acoustic image equalizer

(3D AI EQ)

1 32

Achieve subtle sound quality settings with the soft, sharp, heavy, and light coordinates. Select one of the two 3D settings for a surround effect.

1 [SC-EH760]

Turn [MULTI JOG] to select “AI-EQ”.

[SC-EH560]

Press [EQ] to select “AI-EQ”.

2 Press [3D AI EQ/M.EQ BAND] to se-

lect the surround level.

Each time you press the button: AI EQ>3D AI 1>3D AI 2

^__-----------------__}

3 Change the sound quality with [", !,

#, $].

1 Adjust softness and sharpness with [", !].

(On the tuner amplifier)

2 Adjust heaviness and lightness with [#, $]. The original display is restored on the display panel in about

5 seconds.

3D AI EQ/

M.EQ BAND

MULTI JOG

MULTI

CONTROL

(On the sound processor)

FLAT HEAVY CLEAR

SC-EH760 SC-EH560

DIGITAL

S.WOOFER S.WOOFER

To cancel

Turn [MULTI JOG] (SC-EH760) or press [EQ] (SC-EH560) to select “FLAT”.

Note

HALL AI-EQ M.EQ

³The changes you make are stored and automatically recalled the

next time you select “AI-EQ”.

³“3D AI 1” and “3D AI 2” cannot be selected while the surround sys-

tem or karaoke mode is on (➡ page 22 or 40).

Changing sound field and quality

HALL AI-EQ M.EQ

Boosting the super woofer

[SC-EH760]

HALL AI-EQ M.EQ

Press [DIGITAL S.WOOFER].

[SC-EH560]

Press [S.WOOFER].

The indicator lights. Each time you press the button: MID (medium)>MAX (high)>cancel

^_______---------------__}

There is only one level when listening through headphones.

To cancel

Press [DIGITAL S.WOOFER] (SC-EH760) or [S.WOOFER] (SC-EH560) to turn the indicator off.

SC-EH760 SC-EH560

DIGITAL

S.WOOFER

(On the tuner amplifier)

RQT5355

Enjoying surround sound

The following chart gives a summary of this unit’s surround features. It also shows additional features that can be used to enhance your enjoyment.

Note

³All the features are only effective if speakers are used. No discernible effect will be heard through headphones. ³You may experience a reduction in sound quality when these surround systems and effects are used with some sources. If this occurs, either turn

the surround system or effect off or reduce the level of the effect.

Surround system Features Software

[SC-EH760]

6CH DISCRETE INPUT

(➡ page 24)

[SC-EH760]

DOLBY PRO LOGIC

(➡ page 25)

[SC-EH560]

VIRTUAL DOLBY SURROUND

Changing sound field and quality

(➡ page 26)

³Use this input selector to enjoy

5.1 channel sources (e.g. Dolby Digital or DTS) played on a DVD player with

5.1 channel output and a built in Dolby Digital/DTS decoder (➡ page 38 for connection, page 24 for operation).

³Connect a subwoofer (not included) to

the SUBWOOFER OUT terminal to enhance the surround effect (➡ page 24 for operation).

³Dolby Pro Logic is a decoding system that was

developed to get a better sense of presence from sources encoded with Dolby Surround. The feeling of position has been improved by the addition of a separate center speaker channel.

³This unit has built-in Dolby Pro Logic circuitry

so you can enjoy Dolby Surround by connecting the speakers.

³If your DVD player only has 2-channel output,

you can still enjoy surround sound when playing 5.1 channel software by using Dolby Pro Logic.

This mode enables you to play sources recorded in Dolby Digital or Dolby Pro Logic through the two front speakers, but with a surround-like effect.

DVDs encoded with Dolby Digital or DTS can be identified with these marks.

See the manual for the equipment you have connected for details on the types of software you can use.

Software encoded with Dolby Surround can be identified with this mark.

³DVD ³Laser Disc ³Video tape ³CD

Software encoded with Dolby Digital or Dolby Surround can be identified with these marks.

³DVD ³Laser Disc ³Video tape ³CD

RQT5355

³This mode adds surround effects to

movie software that hasn’t been

[SC-EH760]

SUPER SURROUND

(➡ page 26)

SIMULATED STEREO

(➡ page 26)

MOVIE

MUSIC

recorded with the above systems.

³In MOVIE mode you can adjust the

volume of the surround speakers to get the best surround effect.

This mode adds surround effects to stereo sources.

This mode adds stereo-like effects to monaural sources.

Amplifier modes

[SC-EH760]

When using the above surround systems (except for SIMULATED STEREO), the amplifier is automatically switched to the surround mode. In all other cases, the TRI-AMP mode (stereo) is engaged. In this mode, three separate amplifiers are used to drive the three sections (LOW, MID, and HIGH) of the two front speakers.

[SC-EH560]

The TRI-AMP mode is active at all times.

Any stereo sound source except for the radio.

³Video tape ³CD ³Tape

Any monaural sound source except for the radio.

³Video tape ³CD ³Tape

(Tuner amplifier) Surround mode TRI-AMP mode (stereo)

Additional effects

A Center focus B Virtual rear surround C Multi rear surround D 3D enhanced surround G Seat position

[SC-EH760]

A Center focus

³This mode makes it seem like the sound

from the center speaker is coming from within the television. You can select one of two levels.

³The center speaker should be placed on

top of the television.

(➡ page 27)

[SC-EH760]

C Multi rear surround

(➡ page 27) This mode makes it seem like there are multiple surround speakers in your room, increasing the cinema-like atmosphere.

[SC-EH760]

B Virtual rear surround

(➡ page 27)

³This mode is useful if you have to place

your surround speakers near the front speakers due to the layout of your room.

³This mode makes it seem like the sound

from the surround speakers is coming from behind you.

Virtual speakers

[SC-EH760]

D 3D enhanced surround

(➡ page 27) This mode adds width to the sound from the surround and front speakers.

E Center effect F Surround effect G Seat position

B Virtual rear surround C Multi rear surround D 3D enhanced surround G Seat position

When you select a surround effect, the indicators corresponding to the effects you can use with that surround effect light orange.

“DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.

Manufactured under license from Dolby Laboratories Licensing Corporation. DOLBY, the double-D symbol ë and “PRO LOGIC” are trademarks of Dolby Laboratories Licensing Corporation.

Virtual speakers

[SC-EH560]

E Center effect

(➡ page 28)

F Surround effect (➡ page 28)

When you are using Virtual Dolby Surround, you can adjust the sound that is directed to the virtual center and surround speakers in three levels.

Virtual center speaker

Virtual surround speakers

Changing sound field and quality

G Seat position (➡ page 29)

This mode helps maintain the sound position even if the listening position itself is changed.

RQT5355

Enjoying surround sound

1 3

INPUT SELECTOR DIGITAL

6CH

DISCRETE INPUT

DOWN

VOLUME

SLEEP

PROGRAM

123

456

7890

3D AI EQ/M.EQ BAND

CH SELECT

PRO LOGIC DIGITAL

SUPER

TEST

SURROUND

VCR/AUX/

TAPE/

6CH INPUT

DECK 1/2

⁄/g¤ ¤»

MUTING

∂ VOLUME µ

CANCEL

DISC

j/-/--

AV EFFECT

S.WOOFER

TUNER/

BAND

Changing sound field and quality

S.WOOFER

6CH DISCRETE INPUT

SC-EH760

Preparation:

Connect a DVD player with a built in Dolby Digital or DTS decoder (➡ page 38).

1 Press [6CH DISCRETE INPUT]. 2 Playback a Dolby Digital or DTS

source on the DVD player.

3 Adjust the volume.

To cancel

Press [INPUT SELECTOR] to select another source.

If you have connected a subwoofer

Press and hold [DIGITAL S.WOOFER] until “SUB W ON” is displayed.

[A] Speaker level adjustments

If the level of the speakers appears to be different while listening to a source, adjust the level of the speakers to the same apparent level.

While playing a Dolby Digital or DTS source 1 Press [CH SELECT] to select the speaker to adjust.

Each time you press the button: Lch: Front left speaker Cch: Center speaker Rch: Front right speaker RSch: Right surround speaker LSch: Left surround speaker SWch: Subwoofer (only when connected)

2 Press [3] (to increase level) or [4] (to decrease level).

Repeat steps 1 and 2 to adjust the level accordingly.

³If your DVD player is able to output a test signal, you can use it

instead of playing a source.

Note

You cannot record or enjoy karaoke (for Australia and N.Z. only) when you are using 6CH DISCRETE INPUT. To record or enjoy karaoke with DVDs, ensure the DVD player is also connected to the AUX (DVD) IN terminals and select “AUX (DVD)” with [INPUT SELECTOR] (➡ page 39).

RQT5355

CH SELECT

Enjoying surround sound

PRO LOGIC

OFF/ON

SLEEP

PROGRAM

123

456

7890

3D AI EQ/M.EQ BAND

PRO LOGIC DIGITAL

SUPER

SURROUND

TAPE/

DECK 1/2

⁄/g¤ ¤»

AV EFFECT

CH SELECT

TEST

VCR/AUX/ 6CH INPUT

MUTING

∂ VOLUME µ

CANCEL

DISC

j/-/--

S.WOOFER

TUNER/

BAND

DOLBY PRO LOGIC

SC-EH760

1 Press [ë PRO LOGIC, OFF/ON].

The indicator turns green.

2 Playback a Dolby Surround source.

To cancel

Press [ë PRO LOGIC, OFF/ON] so the indicator goes out.

[A] Speaker level adjustments

If the level of the speakers appears to be different while listening to a source, adjust the level of the speakers to the same apparent level. 1 Press [TEST] to output a test signal.

The speaker outputting the test signal is displayed. Lch: Front left speaker Cch: Center speaker Rch: Front right speaker Sch: Surround speakers

2 Press [VOLUME (j or i)] to set the volume level of the front

speakers normally used for enjoying the source.

3 Press [3] (to increase level) or [4] (to decrease level) for center

and surround speakers.

To stop the test signal, press [TEST] again.

Changing sound field and quality

TEST

∂ VOLUME µ

RQT5355

SC-EH760

SC-EH560

DISPLAY MODE

UV DEMO

VIRTUAL

DOLBY SURROUND

SUPER

SURROUND

VIRTUAL

DOLBY SURROUND

SIMULATED

STEREO

(On the tuner amplifier)

Enjoying surround sound

VIRTUAL DOLBY SURROUND

SC-EH560

Press [VIRTUAL DOLBY SURROUND].

The indicator turns green.

To cancel

Press [VIRTUAL DOLBY SURROUND] so the indicator goes out.

Virtual speaker level adjustments

You can adjust the level (1, 2 or 3) of the virtual center and surround speakers (only when CENTER EFFECT or SURROUND EFFECT is on) (➡ page 28). 1 Press and hold [DISPLAY MODE, –ëV DEMO] to output a

demo signal. The speaker outputting the demo signal is displayed. Lch: Front left speaker Cch: Center speaker (virtual) Rch: Front right speaker Sch: Surround speakers (virtual)

2 Set the volume level of the front speakers normally used for en-

joying the source. ([C])

3 Press [3] (to increase level) or [4] (to decrease level) for center

and surround speakers. ([C])

To stop the demo signal, press and hold [DISPLAY MODE, –ëV DEMO] again.

(On the sound processor)

FLAT HEAVY CLEAR HALL AI-EQ M.EQ

Changing sound field and quality

SUPER

SURROUND

(On the tuner amplifier)

SLEEP

PROGRAM

123

456

7890

3D AI EQ/M.EQ BAND

CH SELECT

VOLUME∂, µ

CH SELECT

TEST

PRO LOGIC DIGITAL

VCR/AUX/

TAPE/

6CH INPUT

DECK 1/2

⁄/g¤ ¤»

MUTING

∂ VOLUME µ

SUPER

SURROUND

CANCEL

DISC

j/-/--

AV EFFECT

S.WOOFER

TUNER/

BAND

SUPER SURROUND

SC-EH760

Press [SUPER SURROUND] and select “MOVIE” or “MUSIC”.

The indicator turns green. Each time you press the button: MUSIC>MOVIE>SIMULATED STEREO

^----------STEREO SOUND (off)(---------}

To cancel

Press [SUPER SURROUND] to select “STEREO SOUND”. The indicator goes out.

[C] Surround speaker level adjustments

While playing a source

1 Press [CH SELECT]. 2 Press [3] (to increase level) or [4] (to decrease level).

SIMULATED STEREO

[SC-EH760]

Press [SUPER SURROUND] and select “SIMULATED STEREO”.

Each time you press the button: MUSIC>MOVIE>SIMULATED STEREO

^----------STEREO SOUND (off)(---------}

[SC-EH560]

Press [SIMULATED STEREO].

The indicator turns green.

RQT5355

SC-EH760 SC-EH560

SUPER

SURROUND

SIMULATED

STEREO

To cancel

[SC-EH760]

Press [SUPER SURROUND] to select “STEREO SOUND”. The indicator goes out.

[SC-EH560]

Press [SIMULATED STEREO] so the indicator goes out.

Surround effects [SC-EH760]

These effects are available when the corresponding indicators are alight.

CENTER

FOCUS

VIRTUAL REAR

SURROUND

MULTI REAR

SURROUND

CENTER

FOCUS

MULTI REAR

SURROUND

VIRTUAL REAR

SURROUND

PROGRAM

SLEEP

123

456

7890

3D AI EQ/M.EQ BAND

(On the tuner amplifier)

(On the sound processor)

FLAT HEAVY CLEAR

(On the tuner amplifier)

(On the sound processor)

FLAT HEAVY CLEAR

(On the tuner amplifier)

(On the sound processor)

FLAT HEAVY CLEAR

CH SELECT

TEST

PRO LOGIC DIGITAL

SUPER

SURROUND

3D ENHANCED

SURROUND

CANCEL

DISC

j/-/--

AV EFFECT

S.WOOFER

CENTER FOCUS

Press [CENTER FOCUS].

The indicator turns green. Each time you press the button: CENTER FOCUS1>CENTER FOCUS2>(off)

^_____----------------------------------------___}

To cancel

Press [CENTER FOCUS] so the indicator turns orange.

On the remote control

1 Press [AV EFFECT]. 2 Press [2] or [1] so the “CENTER FOCUS” indicator flashes. 3 Press [3] (to turn on or increase level) or [4] (to decrease level

or turn off). (The indicator turns orange when off.)

VIRTUAL REAR SURROUND

Press [VIRTUAL REAR SURROUND].

The indicator turns green.

To cancel

Press [VIRTUAL REAR SURROUND] so the indicator turns orange.

On the remote control

1 Press [AV EFFECT]. 2 Press [2] or [1] so the “VIRTUAL REAR SURROUND” indicator

flashes.

3 Press [3] (ON) or [4] (OFF).

(The indicator turns orange when off.)

HALL AI-EQ M.EQ

MULTI REAR SURROUND

Changing sound field and quality

Press [MULTI REAR SURROUND].

The indicator turns green.

To cancel

Press [MULTI REAR SURROUND] so the indicator turns orange.

HALL AI-EQ M.EQ

On the remote control

1 Press [AV EFFECT]. 2 Press [2] or [1] so the “MULTI REAR SURROUND” indicator

flashes.

3 Press [3] (ON) or [4] (OFF) .

(The indicator turns orange when off.)

3D ENHANCED SURROUND

Press [3D ENHANCED SURROUND].

The indicator turns green.

3D ENHANCED

SURROUND

(On the tuner amplifier)

(On the sound processor)

FLAT HEAVY CLEAR

To cancel

Press [3D ENHANCED SURROUND] so the indicator turns orange.

On the remote control

1 Press [AV EFFECT].

HALL AI-EQ M.EQ

2 Press [2] or [1] so the “3D ENHANCED SURROUND” indicator

flashes.

3 Press [3] (ON) or [4] (OFF).

(The indicator turns orange when off.)

RQT5355

Surround effects [SC-EH560]

These effects are available when the corresponding indicators are alight.

CENTER EFFECT

1 11 2 22

SLEEP

PROGRAM

CANCEL

1 2 3

4 5 6

7 8 9 0

3D AI EQ/M.EQ BAND

VIRTUAL

j/-/--

AV EFFECT

STEREO

S.WOOFERSIMULATED

CENTER EFFECT

1 Press [CENTER EFFECT].

The indicator flashes green.

2 While the indicator is flashing (within 10 seconds)

Press [3] (to increase level) or [4] (to decrease level).

There are three levels.

To cancel

1 Press [CENTER EFFECT] so the indicator flashes green. 2 Press [CENTER EFFECT] again while the indicator is flashing so

it turns orange.

On the remote control

1 Press [AV EFFECT]. 2 Press [2] or [1] so the “CENTER EFFECT” indicator flashes. 3 Press [3] (to turn on or increase level) or [4] (to decrease level).

To turn it off, after steps 1 and 2 press [4] so the indicator turns orange.

SURROUND EFFECT

MULTI

CONTROL

Changing sound field and quality

SURROUND

EFFECT

MULTI

CONTROL

1 Press [SURROUND EFFECT].

The indicator flashes green.

2 While the indicator is flashing (within 10 seconds)

Press [3] (to increase level) or [4] (to decrease level).

There are three levels.

To cancel

1 Press [SURROUND EFFECT] so the indicator flashes green. 2 Press [SURROUND EFFECT] again while the indicator is

flashing so it turns orange.

On the remote control

1 Press [AV EFFECT]. 2 Press [2] or [1] so the “SURROUND EFFECT” indicator flashes. 3 Press [3] (to turn on or increase level) or [4] (to decrease level).

To turn it off, after steps 1 and 2 press [4] so the indicator turns orange.

RQT5355

Surround effects

SEAT POSITION

SC-EH760

SC-EH560

The indicator flashes green.

2 While the indicator is flashing (within 10 seconds)

Adjust the seat position.

To cancel

1 Press [SEAT POSITION] so the indicator flashes.

1 Press [SEAT POSITION].

PROGRAM

SLEEP

123

456

7890

3D AI EQ/M.EQ BAND

432

CH SELECT

CANCEL

DISC

j/-/--

AV EFFECT

2 Press [SEAT POSITION] again while the indicator is flashing so it

turns orange.

On the remote control

1 Press [AV EFFECT]. 2 Press [2] or [1] so the “SEAT POSITION” indicator flashes. 3 Press [3] (ON). 4 Adjust the seat position with [2, 1, 3, 4] (SC-EH760) or [2, 1]

(SC-EH560). To turn it off, after steps 1 and 2 press [4] so the indicator turns orange.

[SC-EH760]

With virtual rear surround or 3D enhanced surround

3 horizontal steps

[SC-EH560]

5 horizontal steps

SEAT

POSITION

SC-EH760

MULTI JOG

TEST

VCR/AUX/ 6CH INPUT

MUTING

∂ VOLUME µ

SC-EH560

PRO LOGIC DIGITAL

SUPER

S.WOOFER

SURROUND

TAPE/

DECK 1/2

⁄/g¤ ¤»

TUNER/

BAND

(On the tuner amplifier)

(On the sound processor)

SC-EH760

FLAT HEAVY CLEAR

Changing sound field and quality

HALL AI-EQ M.EQ

SC-EH560

FLAT HEAVY CLEAR HALL AI-EQ M.EQ

RQT5355

Before recording (Deck 2 only)

COUNTER

RESET DISPLAY

COUNTER

DISPLAY

COUNTER

RESET

DECK 1/2

Side A

Note

[SC-EH760]

You cannot record when [6CH DISCRETE INPUT] is selected. (“ERROR” appears.)

Selection of tapes for recording

The unit automatically identifies the type of tape.

Normal position/TYPE I ✔

High position/ TYPE II ✔

Metal position/ TYPE IV ✔

To display the tape counter while recording

Press [COUNTER DISPLAY].

The counter is displayed for about 5 seconds.

To reset the tape counter

Press [COUNTER RESET]. ³To display or reset the tape counter for deck 1, first press

[DECK 1/2].

Erasure prevention

Tab for side “B”

To re-record

Normal tape High-position tape

Recording operations

Tab for side “A”

Discrimination hole

3 5 2

The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown, being careful not to cover the high position discrimination hole.

Volume, sound quality and surround effects

These have no effect on recording. Sound quality and surround effects are automatically set to flat when recording.

Erasing recordings

1 Press [INPUT SELECTOR] to select “TAPE”. 2 Insert the recorded tape into deck 2. 3 Press [DOLBY NR] so the “ëNR” indicator goes out. 4 Select the reverse mode. 5 Press [´ REC PAUSE]. 6 Press ["] or [!].

Your attention is drawn to the fact that recording pre-recorded tapes or discs or other published or broadcast material may infringe copyright laws.

RQT5355

Before recording (Deck 2 only)

Preparatory steps

OPEN

DOLBY NR

Do these steps before each recording. Wind up the leader tape in deck 2 so recording can begin immediately.

1 Press [< OPEN] on deck 2 and insert

the cassette.

Insert the cassettes on both decks for tape-to-tape recording (➡ page 33). DECK 1: For playback DECK 2: For recording

2 Press [DOLBY NR] to select Dolby NR

on (“ëNR” appears) or off.

(➡ “Dolby noise reduction” page 19)

3 Press [REV MODE] to select the re-

verse mode.

Each time you press the button: h: One side only records. d and f: Both sides record (forward> reverse). “f” automatically changes to “d” when [´ REC PAUSE], [EDIT] or [TAPE EDIT] is pressed.

Forward side Tape facing down

Î

REV MODE

2 ÎNR

Recording operations

RQT5355

SC-EH760

EDIT

Recording CDs

Preparation:

³Do the preparatory steps (➡ page 31). ³Insert the CD(s) you want to record (➡ page 12). ³[SC-EH760]

Press [DISC 1]– [DISC 5] on the CD changer to select the disc where you want to start recording, then press [º] to stop the disc.

Normal recording

1 Press ["] (reverse side) or [!] (forward side)



then [º] to set the tape direction.

2 Press [´ REC PAUSE].

The deck goes into the recording standby mode and the indicator “"” or “!” starts flashing.

3 Press [!] on the CD changer or CD

player.

Recording starts automatically.

DISC1–5

SC-EH560

Recording operations

REC

PAUSE

REC

4 seconds after the CD(s) finishes, the deck goes into the recording standby mode.

To stop recording EITHER

Press [º] on the CD changer or CD player. The deck goes into the recording standby mode 4 seconds later.

Press [º] on the deck. Recording stops immediately but the CD continues to play.

To record programmed tracks

Program tracks before step 1 (➡ page 14).

One touch CD editing

This function makes it easier for you to record from discs. ³When recording, if a track is cut off in the middle at the end of the

front side, it is recorded from the beginning on the reverse side.

³At the end of the reverse side recording stops and the current track

will be interrupted.

After pressing ["] or [!] then [º] on the cassette deck to set the tape direction,

EDIT



Press [EDIT].

Î

NR2

Recording starts. In the meantime, “CD EDIT” will scroll across the display from right to left.

RQT5355

SC-EH760 SC-EH560

EDIT

REC

After edit-recording has finished

The cassette deck automatically stops.

To stop editing

Press [º] on the CD changer or CD player. The cassette deck also stops. “EDIT OUT” is displayed.

To edit programmed tracks

Program the tracks (➡ page 14) and press [EDIT].

EDIT

ÎNR2

Recording the radio

Preparation: Do the preparatory steps (➡ page 31).

REC

PAUSE

(➡ page 16 or 17)

2 Press [´ REC PAUSE].

1 Tune to the required station.

The deck goes into the recording standby mode and the play indicator “"” or “!” starts flashing.

3 Press ["] (reverse side) or [!] (forward side) to

start recording.

ÎNR2 REC

To stop recording

Press [º].

To temporarily stop recording

Press [´ REC PAUSE]. The deck goes into recording standby mode. To resume recording press ["] or [!] with the flashing indicator.

Tape-to-tape recording

Preparation: Do the preparatory steps 1 and 3 (➡ page 31).

1 Set the tape direction on both decks.

1 Press [DECK 1/2] to select “DECK 2”. 2 First press ["] or [!], and then [º].

Repeat steps 1 and 2 for deck 1.

TAPE EDIT

DECK 1/2

2 Press [TAPE EDIT] to start recording.

The indicator “"” or “!” shows deck 2 direction. If either deck 1 or deck 2 stops, the other deck also stops.

To stop recording

Press [º]. Both decks will stop.

To enjoy another source while recording

Start playing the other sound source. You can change the volume level and tone quality without affecting the recording.

Note

The recording level and the noise reduction effect of the original (playback) tape will be recorded on the new tape.

2 REC1

Recording operations

RQT5355

6 1 2–5

Using the timers

The play timer

This timer starts play of the selected source at the selected time. The example shows settings for preset radio channel 8 to play between 6:30 and 7:40 at j40 dB.

œPLAY/œREC

CLOCK/TIMER

2–5

DEMO

SET

TUNING

SET

Preparation: Turn the unit on, set the time (➡ page 11), preset

radio stations if you want the timer to start playing the radio (➡ page 17).

1 1 Press [CLOCK/TIMER, –DEMO] to

select “FPLAY.”

Each time you press the button: CLOCK>FPLAY>FREC>Original display

^-------------------------------------------------------------------}

2 Press [SET] within 3 seconds.

2–5

1 Press [TUNING (X or W)] to select

the condition required and

2 press [SET].

FPLAY

2 Select the start time. 3 Select the finish time. 4 Select the source.

TUNER()CD()TAPE

^----------------------------------J

Insert a CD or tape if you select these sources. If you select TUNER

Select a preset channel.

5 Select the volume.

The play timer is now on standby. The display shows each condition again then restores the original display.

Timer operations

2 3 4

6 Press [ê/I] to turn the unit off.

“FPLAY/FREC” indicator remains illuminated to show the

FPLAY

MHz

play (or record) timer is on even when ECO mode is selected (➡ page 11).

The timer starts at the set time with the volume increasing gradually to the set level.

To cancel the timer

Press [FPLAY/FREC] so “FPLAY” goes out. Each time you press the button:

FPLAY>FREC>FPLAY FREC>Light off (OFF)

^---------------------------------------------------------------------------------}

The play timer function will be canceled, but the settings stay in the memory.

For your reference:

When you insert cassettes in decks 1 and 2, deck 1 has priority.

RQT5355

H/I

FPLAY

Using the timers

The record timer

œPLAY/œREC

CLOCK/TIMER

2–4

6 1 2–4

DEMO

SET

TUNING

FREC

This timer records the radio at the set time. The example shows settings for recording preset channel 8 from 18:30 to 19:30.

Preparation: Turn the unit on, set the time (➡ page 11), preset

radio stations (➡ page 17).

1 1 Press [CLOCK/TIMER, –DEMO] to

select “FREC”.

Each time you press the button: CLOCK>FPLAY>FREC>Original display

^-------------------------------------------------------------------}

2 Press [SET] within 3 seconds.

2–4

1 Press [TUNING (X or W)] to select

the condition required and

2 press [SET].

2 Select the start time. 3 Select the finish time. 4 Select the preset channel.

The record timer is now on standby. The display shows each condition again then restores the original display.

5 Prepare for recording.

1 Insert a tape into deck 2. 2 Select the Dolby NR mode. 3 Select the reverse mode. 4 Select the tape direction.

6 Press [ê/I] to turn the unit off.

“FPLAY/FREC” indicator remains illuminated to show the record (or play) timer is on even when ECO mode is selected (➡ page 11).

H/I

SET

2 3 4

Recording starts 30 seconds before the set time with the volume muted during the set time.

Timer operations

To cancel the timer

Press [FPLAY/FREC] so “FREC” goes out.

FREC

FRE

FREC

MHz

Each time you press the button:

FPLAY>FREC>FPLAY FREC>Light off (OFF)

^---------------------------------------------------------------------------------}

The record timer function will be canceled, but the settings stay in the memory.

RQT5355

œPLAY/œREC

CLOCK/TIMER

DEMO

SLEEP

PROGRAM

SLEEP

CANCEL

123

456

7890

3D AI EQ/M.EQ BAND

CH SELECT

TEST

VCR/AUX/ 6CH INPUT

MUTING

∂ VOLUME µ

AV EFFECT

PRO LOGIC DIGITAL

SUPER

S.WOOFER

SURROUND

TAPE/

DECK 1/2

⁄/g¤ ¤»

DISC

j/-/--

TUNER/

BAND

Using the timers

The play and record timers

Checking the timers

Press [CLOCK/TIMER, –DEMO] to select “FPLAY” (or “FREC”). The timer conditions are shown in the following order: Play timer: Start time>Finish time>Source>Volume Record timer: Start time>Finish time>Broadcast station you select

The timers can be checked even if the unit is off.

Playing the unit after the timers are set

The unit can be used after the timers are set. Make sure the unit is off before the set start time.

Turning the timers on and off

The timers come on at the set times if “FPLAY/FREC” indicator is illuminated. They can be turned on and off by pressing [FPLAY/ FREC] (➡ pages 34 and 35).

Note

³If you turn the unit off and on again while a timer is functioning, the

finish time setting will not be activated.

³If the power is on, the timer will not function. The system must be in

the standby mode.

³This system retains the ON/OFF time settings until you make a new

setting. If you make a new ON time setting, you must make a new OFF time setting.

The sleep timer

Remote control only

This timer turns the unit off after a set time.

While playing a source

Press [SLEEP] to select the time (minutes).

Each time you press the button: SLEEP 30_--)SLEEP 60_--)SLEEP 90

^-=SLEEP OFF(=SLEEP 120(_}

Timer operations

SLEEP

RQT5355

SLEEP

To cancel the sleep timer

Press [SLEEP] to select “SLEEP OFF”. “SLEEP” goes out.

To confirm the remaining time

(While the timer is functioning) Press [SLEEP]. The remaining time is shown for about 5 seconds.

To change the setting

Press [SLEEP] to display the remaining time, then press again to select the required time.

Using the timers together

Any of the timers can be used together, but ensure the unit is off before the start time for the record and play timers.

Changing the sound range

display

The sound processor shows the level of each sound range with the three types of display described below.

SC-EH760 SC-EH560

DISPLAY MODE DISPLAY MODE

–

UV DEMO

SC-EH760 SC-EH560

DISPLAY MODE

MUTING

UV DEMO

FLAT HEAVY CLEAR

FLAT

HEAVY CLEAR

FLAT HEAVY CLEAR

TEST

VCR/AUX/ 6CH INPUT

MUTING

PRO LOGIC DIGITAL

TAPE/

DECK 1/2

⁄/g ¤ ¤»

M N

∂ VOLUME µ

(On the sound processor)

SUPER

S.WOOFER

SURROUND

TUNER/

BAND

[SC-EH760]

Press [DISPLAY MODE].

[SC-EH560]

Press [DISPLAY MODE, –ëV DEMO].

The spectrum display will change as follows.

[a] Normal display

This display indicates the strength of the sound in each tonal range.

[b] Peak-hold display

The peak sound value of each sound range is held on the display for about one second after it occurs.

[c] Aurora display

HALL AI-EQ M.EQ

The peak sound value of each sound range is displayed in inverted form.

Muting the volume

Remote control only

Press [MUTING].

Volume is reduced to minimum.

To cancel

Press [MUTING] again. “MUTING” goes out and the volume is restored. To cancel from the tuner amplifier, turn [VOLUME] to minimum (–– dB), then raise it to the required level. Muting is also canceled when the unit is turned off.

MUTING

(On the tuner amplifier)

VOLUME

Using headphones

(not included)

Reduce the volume before connection.

Avoid listening for prolonged periods of time to prevent hearing damage. Plug type: 3.5 mm stereo

Convenient functions

RQT5355

DVD player with 5.1ch output

SUBWOOFER

L/R OUT (MIX)

DVD player/Laser disc player (without 5.1ch output), etc.

AUDIO

L/R OUT

FRONT L/R

SURROUND L/R

CENTER

SC-EH760

AUX

(DVD)

SUBWOOFER

SC-EH760

Sound processor

AUX

(DVD)

Sound processor

DVD 6ch INPUT

CENTER

SURROUND FRONT

External unit connections

³Turn off all units before making connections. ³Refer to the manual of the other unit for details.

(Cables and equipment not included.)

Stereo phono cable (not included)

White

(L)

Red

(R)

Video connection cable (not included)

Connections to SC-EH760

[A] DVD player with 5.1ch output

This unit has the input terminals for 5.1ch surround systems but it does not have the decoders necessary to play them back. The DVD player should have these decoders and 5.1ch output.

To record sound from the DVD player

Connect to AUX (DVD).

Subwoofer

The included front speakers have subwoofers, but you can enhance surround sound from a unit connected to DVD 6ch INPUT by connecting another subwoofer to SUBWOOFER OUT (➡ page 24 for operation).

Video cassette recorder

AUDIO

OUT

Convenient functions

Video cassette recorder

VIDEO IN

Television set

AUDIO

VIDEO OUT

VIDEO

SC-EH560

SC-EH760

SC-EH560

Sound processor

VCR

(EXT)

OUT IN

SC-EH760 for Australia and N.Z.

Sound processor

VIDEO VCR OUT

MONITOR OUT

VCR

(EXT)

OUT IN

VCR IN

DVD IN

VIDEO

OUT

[B] DVD player/Laser disc player (without 5.1ch output),

etc.

This unit has Dolby Pro Logic circuitry. The sound will be reproduced with the same powerful stereophonic effects found in movie theaters.

[C] Video cassette recorder

You can enjoy the sound from your video cassette recorder.

[D] Television set (For Australia and N.Z. only)

By connecting the video connection cable as shown in the illustration, it is possible to switch both audio and video input with [INPUT SELECTOR] of this unit.

Connections to SC-EH560

[B] DVD player/Laser disc player etc.

You can enjoy the sound from your DVD player/Laser disc player etc.

[C] Video cassette recorder

You can enjoy the sound from your video cassette recorder.

RQT5355

DVD player/Laser disc player

INPUT SELECTOR

Using other equipment

Listening to an external source

1 Press [INPUT SELECTOR] to select

the external source.

Each time you press the button:

[SC-EH760]

TUNER>CD>TAPE>VCR (EXT)>AUX (DVD)

^----------------------------------------------------------------------------}

[SC-EH560]

TUNER>CD>TAPE>VCR (EXT)

^----------------------------------------------------}

On the remote control

Press [VCR/AUX/6CH INPUT] (SC-EH760) or [VCR] (SC-EH560).

2 Operate the unit.

See the unit’s manual for details on operation and connection.

To enjoy Dolby Digital and DTS

➡ page 24

Recording an external source

1 2

INPUT SELECTOR

DOLBY NR

4 2 3

REV MODE

1 Press [INPUT SELECTOR] to select

the external source.

2 Select Dolby NR and reverse mode.

(➡ page 31)

3 Press [´ REC PAUSE]. 4 Press ["] or [!] to start recording. 5 Start the source to be recorded.

See the unit’s manual for details on operation and connection.

To stop recording

Press [º] on the deck.

To temporarily stop recording

Press [´ REC PAUSE]. The deck goes into the recording standby mode. To resume recording press ["] or [!] with the flashing indicator.

Recording onto an external unit

Select the source to be recorded with [INPUT SELECTOR]. Start recording on the external unit and start playing the source to be recorded.

Convenient functions

REC

PAUSE

RQT5355

Enjoy karaoke with CDs and cassettes

(For Australia and N.Z. only)

MIC VOL

MIN MAX

1 2

MIC

ECHO

2 1

1 Lower the volume with [MIC VOL] and

connect the microphone.

Plug type: 6.3 mm monaural

2 Press [KARAOKE] to select a voice

mode.

Each time you press the button: MONO L>MONO R>VOICE MUTE>(off)

^-----------------------------------------------------------------}

Use this chart to select the appropriate mode. ±: appropriate ´: for practice ——: inappropriate

Software

Voice modes

MONO L

MONO R

VOICE MUTE

(off)

(Background

musiciVoice)

Sound

multiplex

music)

(Voice)

——

Karaoke

Stereo

——

Non-

karaoke

——

(For singing

along)

3 Start playing the CD or cassette.

KARAOKE

VOLUME

Convenient functions

DOWN

ECHO

MIC VOL

MIN MAX

MONO·L

MONO· R

V.MUTE

ECHO

4 Adjust the main volume and micro-

phone volume.

To cancel

Press [KARAOKE] to clear the display.

To record your performance

Start recording in deck 2 and then start singing. Ensure the voice mode is set to off (at step 2 above) when playing the recording.

Note

The karaoke modes cannot be used with the radio, 3D AI EQ, 6CH DISCRETE INPUT or surround effects.

When using the VOICE MUTE function

Voice mute may not function sufficiently or noise may interfere when using the following software.

³Monaural software ³Software with few musical instruments, including classic music and

poetry recitations

³Software with duets or strong choruses

Using the echo effect

Press [ECHO].

Each time you press the button: ECHO 1>ECHO 2>ECHO 3>OFF

^------------------------------------------------------}

RQT5355

Technical specifications

SOUND PROCESSOR

º EQ/SFP section

MANUAL GEQ

3-Band parametric EQ

Center frequency

High band Mid band 240 Hz, 390 Hz, 630 Hz, 1 kHz, Low band 70 Hz, 90 Hz, 143 Hz, 240 Hz

Level control n1.2, 2.4, 3.6, 4.8, 6 dB

EQ SPACE mode

3 modes HEAVY, CLEAR, HALL

3D acoustic image EQ

3 modes AI EQ, 3D AI 1, 3D AI 2

º Pre-amplifier section [SC-EH760]

Input sensitivity/impedance

VCR (EXT) 250 mV/15 k AUX (DVD) 250 mV/15 k

Output level

VCR REC OUT 150 mV/1.5 k

(For Australia and N.Z. only) VIDEO OUTPUT

MONITOR OUT 1 Vp-p, 75  VCR REC OUT 1 Vp-p, 75 

º Pre-amplifier section [SC-EH560]

Input sensitivity/impedance

VCR (EXT) 250 mV/15 k

Output level

VCR REC OUT 150 mV/1.5 k

º DOLBY PRO LOGIC section [SC-EH760]

PRO LOGIC mode SURROUND CENTER mode NORMAL DELAY TIME 20 ms (Fixed)

3.5 kHz, 5.3 kHz, 8 kHz, 12.5 kHz

1.5 kHz, 2.3 kHz, 3.5 kHz

º VIRTUAL DOLBY SURROUND section

[SC-EH560]

Mode VIRTUAL DOLBY SURROUND

º AV SURROUND section

AV surround mode SIMULATED STEREO

º DSP CONTROL section

DSP control mode SEAT POSITION

º Spectrum analyzer section

Display mode NORMAL, PEAKHOLD, AURORA

º General

Dimensions (WtHtD)

Mass [SC-EH760] 1.5 kg

[SC-EH760] SUPER SURROUND

[SC-EH760] CENTER FOCUS (1, 2),

[SC-EH760] VIRTUAL REAR SURROUND,

[SC-EH760] MULTI REAR SURROUND,

[SC-EH760] 3D ENHANCED SURROUND

[SC-EH560] CENTER EFFECT (1, 2, 3),

[SC-EH560] SURROUND EFFECT (1, 2, 3)

[SC-EH760] 293k89k270 mm

[SC-EH560] 293k89k269 mm

(MUSIC, MOVIE)

[SC-EH560] 1.4 kg

TUNER AMPLIFIER

º Amplifier section [SC-EH760]

Power output (L/R both channel driven)

Stereo Mode

DIN 10 kHz THD 1 %/6  (High) 2k20 W

1 kHz THD 1 %/6  (Mid) 2k20 W 100 Hz THD 1 %/8  (Low) 2k50 W

RMS 10 kHz THD 10 %/6  (High) 2k30 W

1 kHz THD 10 %/6  (Mid) 2k30 W 100 Hz THD 10 %/8  (Low) 2k70 W

PRO LOGIC mode

DIN FRONT 1 kHz THD 1 %/TTL Imp. 6 

SURROUND 1 kHz THD 1 %/8  2k20 W CENTER 1 kHz THD 1 %/8  50 W

RMS FRONT 1 kHz THD 10 %/TTL

SURROUND 1 kHz THD 10 %/8  2k30 W CENTER 1 kHz THD 10 %/8  70 W

PMPO 1 kHz/High or Mid 6 , Low 8 

CENT. 8 , SURR. 8  3,000 W

Total harmonic distortion

Rated power at 1 kHz 1 % (6 ) Half power at 1 kHz 0.1 % (6 )

(High/Mid) 2k20 W

100 Hz THD 1 %/8  (Low)

Imp. 6  (High/Mid)

100 Hz THD 10 %/8  (Low)

2k50 W

2k30 W 2k70 W

Load impedance

FRONT (High/Mid) total impedance 6 

FRONT (Low) 8 

SURROUND 8  CENTER 8 

S. WOOFER

Center frequency 70 Hz LEVEL (VOL s20 dB) MID i8 dB

º Amplifier section [SC-EH560]

Power output (L/R both channel driven)

DIN 10 kHz THD 1 %/6  (High) 2k12 W

1 kHz THD 1 %/6  (Mid) 2k12 W 100 Hz THD 1 %/6  (Low) 2k36 W

RMS 10 kHz THD 10 %/6  (High) 2k18 W

1 kHz THD 10 %/6  (Mid) 2k18 W 100 Hz THD 10 %/6  (Low) 2k54 W

PMPO 1 kHz/Low 6 , Mid 6 , High 6 

Total harmonic distortion

Rated power at 1 kHz 1 % (6 ) Half power at 1 kHz 0.1 % (6 )

Load impedance Main (High) 6 

S. WOOFER

Center frequency 70 Hz LEVEL (VOL s20 dB) MID i8 dB

º FM tuner section

Frequency range 87.50–108.00 MHz Sensitivity 1.8 ¬V (IHF usable)

S/N 26 dB 1.5 ¬V

S/N

MONO 70 dB (75 dB, IHF)

Antenna terminal(s) 75  (unbalanced)

º AM tuner section

Frequency range 522–1629 kHz (9 kHz steps) Sensitivity (S/N 20 dB) 500 ¬V/m

º Timer section

Clock Quartz-lock type Function Play timer (1 time, daily),

Setting intervals (Play/Rec)

º General

Power supply

(For United Kingdom, Australia and N.Z.) (For others) AC 230 V 50 Hz

Power consumption [SC-EH760] 205 W

Standby

Normal mode 11 W

ECO mode 0.5 W Dimensions (WtHtD) 293k 118.5k346 mm Mass [SC-EH760] 5.3 kg

Main (Mid) 6  Main (Low) 6 

520–1630 kHz (10 kHz steps)

Rec timer (1 time, daily),

Sleep (120 min, 30 min intervals)

1 minute–23 hours 59 minutes

MAX i12 dB

1,400 W

MAX i12 dB

(0.05 MHz steps)

(1 min intervals)

AC 230–240 V 50 Hz

[SC-EH560] 110 W

[SC-EH560] 4.3 kg

CD PLAYER

º Audio

DA converter 1 bit DAC MASH

º Pickup

Wavelength 780 nm

º General

Dimensions (WtHtD)

Mass [SC-EH760] 2.2 kg

CASSETTE DECK

Deck system Stereo cassette deck Track system 4 track, 2 channel Recording system AC bias

Bias frequency 100 kHz

Erasing system AC erase Heads

Deck 1

(Playback head) Permalloy head

Deck 2

(Recording/Playback head) Permalloy head

(Erasing head) Double gap ferrite head Motors

Deck 1, 2

Capstan drive DC servo motor

[SC-EH760] 293k89k288 mm

[SC-EH560] 293k89k268 mm

[SC-EH560] 1.6 kg

Tape speed 4.8 cm/s Wow and flutter 0.16 % (WRMS) Fast forward and rewind times

Frequency response (Dolby NR off)

TYPE I (NORMAL) 20 Hz–16 kHz (DIN) TYPE II (HIGH) 20 Hz–16 kHz (DIN) TYPE IV (METAL) 20 Hz–16 kHz (DIN)

S/N (Signal levelumax recording level, TYPE II

type tape)

NR off 56 dB (A weighted) Dolby B NR on 66 dB (A weighted)

Input sensitivity and impedance

REC (IN) 150 mV/23 k

Output voltage and impedance

PLAY (OUT) 280 mV/360 

º General

Dimensions (WtHtD) 294k 118.5k281 mm Mass 2.1 kg

FRONT SPEAKER [SC-EH760]

Type 3 way, 3 speakers Speaker(s)

Super woofer 17 cm cone type Woofer 12 cm cone type Tweeter 6 cm ring shaped dome type

Impedance High 6 

Input power (Music) High 60 W

Output sound pressure level 87 dB/W (1.0 m) Crossover frequency 120 Hz, 4 kHz Frequency range 42 Hz–50 kHz (j16 dB)

º General

Dimensions (WtHtD) 254k 422k260 mm Mass 6.4 kg

Approx. 110 seconds with

C-60 cassette tape

Mid 6 

Low 8 

Mid 60 W

Low 120 W

46 Hz–36 kHz (j10 dB)

FRONT SPEAKER [SC-EH560]

Type 3 way, 3 speakers Speaker(s)

Super woofer 14 cm cone type Woofer 12 cm cone type Tweeter 6 cm cone type

Impedance High 6 

Input power (Music) High 40 W

Output sound pressure level 84 dB/W (1.0 m) Crossover frequency 150 Hz, 4 kHz Frequency range 46 Hz–22 kHz (j16 dB)

º General

Dimensions (WtHtD) 254k 422k260 mm Mass 6.0 kg

CENTER SPEAKER [SC-EH760]

Type 2 way, 2 speakers Speaker

Woofer 10 cm cone type

Tweeter 6 cm cone type Impedance 8  Input power (Music) 120 W Output sound pressure level 85 dB/W (1.0 m) Crossover frequency 4 kHz Frequency range 75 Hz–22 kHz (j16 dB)

º General

Dimensions (WtHtD) 250k 121k147 mm Mass 1.6 kg

SURROUND SPEAKER [SC-EH760]

Type 1 way, 1 speaker Speaker

Full range 8 cm cone type Impedance 8  Input power (Music) 60 W Output sound pressure level 84 dB/W (1.0 m) Frequency range 120 Hz–20 kHz (j16 dB)

º General

Dimensions (WtHtD) 170k 106k118 mm Mass 0.9 kg

50 Hz–20 kHz (j10 dB)

Note

1. Specifications are subject to change without

notice. Mass and dimensions are approximate.

2. Total harmonic distortion is measured by the

digital spectrum analyzer.

Mid 6 

Low 6 

Mid 40 W

Low 70 W

Reference

RQT5355

Troubleshooting guide

Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.

Reference pages are shown as black circled numbers 6. Common Problems

No sound.

Sounds unfixed, reversed or come from one speaker only.

Humming heard during play.

“ERROR” is displayed. “U70” is displayed. “F61” is displayed. ECO mode on but display still

lights up in standby mode. “––:––” appears on the display.

Listening to the radio

Noise is heard. The stereo indicator flickers or doesn’t light. Sound is distorted.

A beat sound is heard. A low hum is heard during AM

broadcasts. The correct AM frequency can’t be

tuned in.

Turn the volume up. The speaker cords may be shorted. Turn the unit off, check and correct the connections and turn the unit on. 6

Check the speaker connections. 6

An AC mains lead or fluorescent light is near the cables. Keep other appliances and leads away from this unit’s cables. If possible in your area, turn the AC mains lead’s plug or connector over to reverse the lead’s polarity.

Incorrect operation performed. Read the instructions and try again. Connect the flat cables firmly. If “U70” remains on the display, contact the dealer. There is a problem with the tuner amplifier. Consult your dealer. Turn DEMO off. ;

You plugged the AC mains lead in for the first time or there was a power failure recently. Set the time. ;

Use an outdoor antenna. 7

Turn the TV off or separate it from the unit. Separate the antenna from other cables and leads.

Change the frequency step. Hold [TUNER/BAND] down for 10 seconds to change the step to 9 kHz.

When there is a television set nearby

The picture on the TV disappears or stripes appear on the screen.

The cassette deck

Poor quality sound.

Recording is not possible.

Reference

The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to an outdoor antenna. The TV antenna wire is too close to the system. Separate the antenna wire of the TV set from the system.

Clean the heads. [ Check the Dolby NR setting. B

If the erasure prevention tabs have been removed, cover the holes with adhesive tape. N

RQT5355

The CD changer or CD player

The display is wrong or play won’t start.

[SC-EH760]

“TAKE OUT/DISC” appears on the display.

The disc may be upside down. < Wipe the disc. Replace the disc if it is scratched, warped, or nonstandard. Condensation may have formed in the changer or player due to a sudden change in temperature. Wait about an hour for it to clear and try again.

There is a problem with the CD mechanism. (A power failure may have occurred.) The tray will open automatically. Remove the CD from the tray, and after ensuring there is no CD in the tray close it. The unit will make the disc changing noises for a few moments and then it should operate normally.

During “One touch” editing (➡ page 32)

“DECK NO TAPE” is displayed. “DECK CHANGE TAPE” is

displayed.

Load a cassette into deck 2. O If the erasure prevention tabs have been removed, cover the holes with adhesive tape. N

The remote control

The remote control doesn’t work. Check the batteries are inserted correctly. :

All components are required to service the system. If service is ever necessary, bring the entire system.

Replace the batteries if they are worn.

Maintenance

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soapand-water solution or a weak detergent solution.

³Never use alcohol, paint thinner or benzine to clean this unit. ³Before using chemically treated cloth, read the instructions that

came with the cloth carefully.

For a cleaner crisper sound

Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included).

Reference

RQT5355

Matsushita Electric Industrial Co., Ltd.

Osaka 542-8588, Japan

RQT5355-B

F0100MF1020

TECHNICS SH-EH760 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual