Technicolor - Thomson RR96L User Manual

EN

Main Connections (For UK only)

CAUTION:

EN

For UK Only

CONNECT THE MAIN LEAD INTO AC MAINS
POWER SOCKET

POWER SUPPLY 230V. It must not be connected
to D.C. mains.
Note: The mains lead of the set is fitted with a
moulded plug. If the mains socket are not
compatible or if for any reason the plug is
removed please follow the directions below. The
moulded plug cannot be rewired and if removed
must be disposed of safely.
DO NOT under any circumstances plug the severed
plug into any mains socket as this could result in
electric shock.
Important: If the plug is removed, rewire the
new plug as follow:
The wires in the mains plug are coloured in
accordance to the following code:

BLUE = NEUTRAL & BROWN = LIVE

If the colours of the wires in the mains lead of
this apparatus may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
BLUE wire to the terminal coded N (Neutral) or
coloured black.
BROWN wire to the terminal coded L (Live) or
coloured red.
DO NOT make any connection to
the terminal in the plug which is
marked by the letter E or by the
earth symbol or coloured green
or green and yellow.

A fused plug must be fitted
with a 3A fuse approved by
ASTA or BS1362 and fuse
covers must be always be
securely replaced. If your set
does not work, the fuse may
be blown.

MAINS CONNECTIONS:

(For UK, see inside front cover)

MAINS OUTLET POWER SUPPLY: 230V ~50Hz
Note:

Power is fed to the unit even when it is not functioning. To cut the
power supply off, the power cable must be unplugged.

The descriptions and characteristics in this owner’s manual are for the purpose of
general reference only and not as a guarantee. In order to provide you with the
highest quality product, we may make changes or modifications without prior notice.
The English version serves as the final reference on all product and operational details
should any discrepancies arise in other languages.

BLUE

BROWN

Safety Information

TECHNICAL SPECIFICATIONS:

Power supply
AC 230V ~50Hz
Clock backup:9V 6F22
Power consumption: 7W

• Make sure that you keep your
set away from water and high
temperatures.

• Do not use your system
immediately after transporting it

place, as condensation may cause the system to
malfunction.

• Keep your unit away from humid areas and
abnormally hot places.

• To prevent personal injury, do not reverse any
batteries and do not mix battery types.

• The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the
apparatus.

from a cold place to a warm

THE LIGHTNING
FLASH AND ARROW­HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.

CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USER­SERVICEABLE PARTS IN­SIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

SEE MARKING ON BOTTOM / BACK OF PRODUCT

Please respect the environment.
Before throwing any batteries
away, consult your distributor who
may be able to take them back for
specific recycling.

• No naked flame sources, such as lighted
candles, should be placed on the apparatus.

• Attention should be drawn to the
environmental aspects of battery disposal.

• Minimum distances (2cm) around the
apparatus for sufficient ventilations.

• The ventilation should not be impeded by
covering the ventilation opening with items,
such as newspaper, table-cloths, curtains,
etc.

• The rating plate is located at the bottom cabi­net of apparatus.

THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
A CCOMPANYING
THE PRODUCT.

EN

WARNING:

SHOCK HAZARD,

TO PREVENT FIRE

DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

OR ELECTRICAL

1