Technicolor - Thomson DTH8005 User Manual

1
Contents
EN
EN
Connections and initial set up
Precautions and information before connecting ..................2
Inserting the batteries..............................................................2
Basic connections......................................................................3
About your device ....................................................................4
Placing the DTH 8005 in service ............................................4
Using the remote control unit correctly ..................................4
Switch on your DTH 8005 and your TV set ............................4
Automatic channel search ......................................................5
Sorting the channels........................................................................6
Clock setting ....................................................................................6
Manual channel search ............................................................7
Channel update ................................................................................8
Clock setting ....................................................................................8
Sorting the channels........................................................................8
Other recommended connections..........................................9
Satellite or cable reciever (or decoder) ....................................9
Video recorder ..............................................................................10
Satellite reciever and video recorder ......................................10
Sockets and cables (inputs) ........................................................11
Sockets and cables (outputs)......................................................12
Front sockets (inputs)..................................................................13
The buttons on the front ......................................................14
The messages on the display ................................................15
TV Functions ..................................................................................15
With a disc......................................................................................15
Other indications ..........................................................................15
Displays on your DTH 8005 (menus and banners)..............15
Remote control
Description of keys in DVD mode............................................16
Using the remote control handset to control your
television and satellite or cable receiver..............................17
Controlling a TV set......................................................................17
Controlling a satellite or cable receiver..................................17
Remote control - Code A-B ......................................................17
Programming the remote control........................................18
Automatic code search................................................................18
Manual programming....................................................................18
Recording functions
To watch TV Programmes ....................................................19
To change channel ........................................................................19
Record the current programme ..........................................20
Stop recording ........................................................................21
Closing a DVD+R or DVD+RW disc (Finishing a disc) ......21
Programming a recording......................................................22
Naviclick programmes guide ................................................24
Consulting the TV guide with Naviclick ..................................24
Recording through the Naviclick TV guide..............................24
Recording from a connected device ....................................25
From a satellite receiver or cable receiver (AV2 socket)....25
From a Camcorder or other device (AV3,AV4 socket) ......25
Library......................................................................................26
To find a Title (recording)............................................................26
Sort by Title ....................................................................................27
Sort by Category, sort by date ..................................................27
Access to the title menu ............................................................27
Assign or Change the Category of a title ..............................28
Show discs ......................................................................................28
Playing a disc
Discs you can record ..............................................................29
Discs you can play ..................................................................29
Interactive banners ................................................................30
In TELEVISION mode (Operating principle) ......................30
Information on the TV channel being watched ......................30
Recording the channel being watched......................................30
In DISC PLAYING mode (Operating principle) ................31
With a DVD ..................................................................................31
With an audio CD ........................................................................31
With a VCD (Video CD) ............................................................31
Loading and playing a disc ....................................................32
Search Options........................................................................32
Quick search of an image or a track........................................32
Still picture and frame advance..................................................32
Slow motion (in Pause mode on an image) ............................33
Skipping a chapter or a track (DVD - VCD - CD)................33
Scene Again™ (DVD) ..................................................................33
Advance (DVD) ............................................................................33
Playback options ....................................................................33
Enlarging an image (zoom) ..........................................................33
Titles, chapters, time elapsed,audio and subtitles ................33
The disc information banner ................................................34
Timer (DVD,VCD, CD)................................................................34
Title or Track (DVD,VCD,CD)..................................................34
Chapter (DVD)..............................................................................34
Subtitle and dialogue language (DVD)......................................35
Play modes of discs (DVD - VCD)............................................35
Camera angles (DVD)..................................................................36
PBC - Playback control menu (VCD) ......................................36
Play mode for Audio CDs ..........................................................36
IntroScan (CD) ..............................................................................36
Edit Menu (DVD+RW) ................................................................36
Access to the edit menu ............................................................37
The edit menu functions..............................................................38
Playing images (JPEG),and sounds (mp3) files ..................40
Reading music files (MP3) and / or images (JPEG)................40
Image Functions ............................................................................41
Menus
Disc menu................................................................................42
Play Disc ..........................................................................................42
Disc Title menu (DVD+R, DVD+RW)......................................42
Rename a disc or a title (DVD+R, DVD+RW) ......................44
Player Menu....................................................................................45
Playlist ..............................................................................................45
Disc options....................................................................................46
Language Menu ..............................................................................47
Parental control menu..................................................................49
System Options Menu..................................................................51
Recording Options Menu............................................................53
Further information
Troubleshooting guide............................................................54
NAVICLICK Settings..............................................................57
NexTView Channels ..............................................................58
Channels and Teletext pages (Naviclick)..............................58
Caution ....................................................................................59
Disclaimer of warranty! ..............................................................59
Condensation ................................................................................59
Discs ................................................................................................59
For your safety ..............................................................................59
DVD copy protection ..................................................................59
Remote control - Code A-B ..................................................60
Technical data ........................................................................60
2_DTH8005_en 9/03/04 17:19 Page 1
2
Connections and initial set up
Precautions and information before connecting
• Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your device. Install your device horizontally, on a suitable base (furniture), with enough space around it for ventilation (7-10 cm) • Ensure that the ventilation slots, and the device itself, are not covered by objects such as a mat, newspapers, curtain, etc. • Do not stack any other equipment on top of your DTH 8005. Do not place the device on top of an amplifier or any other equipment that gives off heat • The appliance should not be in contact with liquids or exposed to the risk of dripping or splashing.Therefore be careful not to place any object containing a liquid (vase, glass, bottle,...) on or near your appliance • The DTH 8005 must not be near or exposed to a flame. For instance, do not place a candle on or near the device • Protect the DTH 8005 from moisture and excess heat (e.g. fireplace) or equipment creating strong magnetic or electric fields (i. e. speakers ...).Before moving the device, ensure the disc tray is empty. Switching off the DTH 8005 to the stand-by mode does not disconnect the electricity supply. In order to separate the device completely from the mains, it has to be disconnected by unplugging the mains plug.When connecting, ensure that the plugs of the various cables are pushed securely into their corresponding sockets.Your DTH 8005 is not intended for industrial use but for domestic purposes only.Use of this product is for personal use only. Copying CDs or downloading music files for sales or other business purpose is or may be a violation of copyright law.
Important notice: Please read the recommendations given on page 59.
Inserting the batteries
Important information regarding the batteries
Do not mix different types of batteries or new and old batteries. Do not use rechargeable batteries. In order to avoid any risk of explosion, observe polarities indicated inside the battery compartment. Replace only with the type of batteries specified above. Do not throw them into fire, do not recharge them. Remove the batteries from the remote control unit if you are not going to use it for several weeks. Immediately remove any leaking batteries.Take care in doing this, as leaking batteries may cause burns to the skin or other physical injury.
• Please respect the environment and prevailing regulations. Before you dispose of batteries ask your dealer whether they are subject to special recycling and if he accepts to take them back.
1 2 3
2_DTH8005_en 9/03/04 17:19 Page 2
Connections and initial set up
3
EN
EN
1. Unplug the antenna cable from your TV set and plug it into the ANTENNA-CABLE IN
socket of your DTH 8005.
2. Using the coaxial cable supplied, connect the ANTENNA-CABLE OUT socket of the
DTH 8005 to the
g antenna socket of your TV set.
3. Using the Scart cable supplied, connect the DTH 8005’s AV 1 (TV) socket (TV) to the scart
socket of your TV set (labelled AV 1, EXT 1, AUX 1 depending on the brand).
4. Use the mains cable to connect your DTH 8005 to a mains socket, by first connecting the
cable to the back of the DTH 8005.
Note: connection to a satellite or cable receiver is detailled on page 9. For UK, please see safety information regarding the mains plug at the end of this user manual, in the cover
page.
Basic connections
Your DTH 8005 has many connection possibilities to allow it to fit into a setup comprising several devices.We recommend that you follow the connection setup on this page, and then carry out the adjustments shown on the following pages.You will first need to set up the channels as explained in the following pages before the final interconnection of the devices, described on pages 9 to 12.
TV
DTH 8005
220 - 240 V 50 - 60 Hz
DTH 8005 U
DTH 8005 E
Scart cable
Coaxial Cable
1
23
4
2_DTH8005_en 9/03/04 17:19 Page 3
Connections and initial set up
4
About your device
Your DTH 8005 is a digital video player and recorder.Thanks to its tuner you can watch and record TV progammes on DVD+R and DVD+RW discs. It can play the majority of 8 cm and 12 cm discs, with the exception of DVD Rom, DVD Ram, and DVD audio.
Placing the DTH 8005 in service
Using the remote control unit correctly
When you use remote control,point the unit at the appliance you want to control (DTH 8005, TV set or satellite receiver). Ensure that there is no obstacle between the remote control unit and the appliance, otherwise the infrared signal carrying the remote control commands will be blocked.To control your DTH 8005, ensure that the remote control unit is in DVD mode by pressing once on the DVD key before using any other keys.
Switch on your DTH 8005 and your TV set
1. Turn on your TV set.
2. Set your DTH 8005 remote control unit in DVD
mode by pressing once on the
DVD key.
3. Switch on your DTH 8005 by pressing the
STANDBY/ON button on the front panel of the
player.
4. The first time you turn on your DTH 8005, it will ask
you to select a preferred language for the various displays via the menu which appears on your TV screen. If this menu is not displayed, on your TV screen select the AV socket to which you connected your DTH 8005.
Note:The player menus as well as the dialogues and subtitles of the DVDs will always be presented in the language you’ve chosen if it is available on the discs played.
5. Choose a language using the , keys on the
remote control unit, then confirm by pressing
OK.
Note: Note: the buttons.
Continue on the next page …
2_DTH8005_en 9/03/04 17:19 Page 4
Connections and initial set up
5
EN
EN
6. Select your country of residence using the or
keys, and press
OK.
Note: the arrows indicate that other countries are available. To find your country, use the buttons on your remote control.
7. On the screen that is displayed, the Automatic
option is already selected. Press
OK.
8. An installation window will appear.A cursor shows
the progress in the set-up of the channels.You will need to wait a fair amount of time.When all the channels that you can receive in your area have been stored, 100 % is indicated.The number of channels found is indicated by XX channels found. Press
OK.
Continue on the next page …
Automatic channel search
In each region,TV stations are broadcast on different channels.Your DTH 8005 cannot be factory­set to receive the TV channels of your area.You will have to set up the channels by following the automatic procedure recommended below.
Note:Your DTH 8005 is equipped with the AV Link. function.This function simplifies channel set-up by downloading them from an AV Link or similar television set (Easy Link, Smart Link, Megalogic, etc.) which is already set up.The channels downloaded in this way keep the same characteristics as those of your TV set (same number, name, etc.).Your DTH 8005’s AV Link downloading function is enabled (factory setting).When first turning on the DTH 8005, if the television is turned on, it will download the channels already installed in your television set. If you wish to de-activate this function, see page 52.
2_DTH8005_en 9/03/04 17:19 Page 5
Connections and initial set up
6
Sorting the channels
9.
A channel sorting window will appear.The picture of the selected channel is shown in the background.
The automatic channel search has assigned numbers to the channels is a predefined order.These numbers may not be the numbers you would have chosen. Should this be the case, you can change these numbers by following the instructions at the bottom of the screen.For easy channel identification, we suggest you have a TV magazine at hand.
Note: Channel sorting instructions: Move: press OK (then the / keys until you reach the desired position (Pr no. on the left of the list then OK: swapping of the 2 channels).
Delete:
CLEAR key.
Rename:
INFO keys, then / to search for a name on the
list.Validate by pressing OK. Decoder set-up:
AV (key (displays a symbol in the list of
channels).
10. When all channels have been sorted to your liking, press the key.
11. Your DTH 8005 has an automatic time (and date) setting function.In general, no setting is
required on your part. If the time and date information is correct, press twice on
OK.The
Main Menu of the DTH 8005 is displayed:the installation of the channels is now complete.
Clock setting
AutoClock: If the date and time information is not correct, adjust the clock as described below,
then check in the System Options menu that the automatic time setting is activated.This menu is reached from the Setup menu (see page 52). Setting the time and date on the DTH 8005 is important for the proper operation when recording programmes and for optimum downloading of the programmes guide NAVICLICK.
1. Select Year. Enter 4 digits for the year
(2, 0, 0, 4 for 2004).
2. Then enter the 4 digits of the date
(press 1
, 5, 0, 5 for 15th May).
3. Enter the 4 digits of the time
(press 1
, 5, 5, 9 for 15:59 (03:59 PM).
4. Then press twice on OK. The Main Menu will appear
again. Channel set-up is complete.
Note:You can now use your DTH 8005 and take advantage of its numerous functions. If you want to connect a satellite receiver to your DTH 8005, refer to page 9 for the recommended connection.You can also complete your installation through the settings available in the System Options menu (refer to pages 51-52).These adjustments depend on the other devices that you are likely to connect to your DTH 8005.
If you want to redo the automatic channel set-up, you will have to select Interactive setup in the Installation menu (in the Setup menu).
2_DTH8005_en 9/03/04 17:19 Page 6
Connections and initial set up
7
EN
EN
Manual channel search
If you want to set up a new channel, use the manual search procedure which will enable you to add a channel to the ones already set-up on your DTH 8005.The channels already stored will not be deleted. During the initial installation, if you carried out the automatic installation described on page 5, you do not need to carry out the steps shown on 7 and 8.
1. If the main menu is not displayed,press the MENU key.
2. Select the Setup line using the or keys, and press OK to validate.
3. Select the Installation line using the or keys, and press OK to validate.
4. Select the Manual Search line using the or keys, and press OK to validate.
5. Select your country of residence using the or keys on the remote control, and press
OK.
A set-up window will appear.The Standard line is highlighted.
6. Select your country’s TV standard using the key.
Note: the standards displayed depend on the country selected in step 5.
FRANCE (LL’) for France, EURO BG (BGH) for Western Europe. DKK’ for Eastern Europe. I for the United Kingdom.
7. Select the Reception line using the or keys, and use the key to choose the type
of antenna.
Reception through external antenna: select Antenna (Ch).
Cable reception: select Cable (Ca).
8. Select the Channel line using the or keys.
9. Press PR+ to start the Manual search.
The search starts.When a channel is found, the picture appears in the background.The channel number is indicated (e.g.: Ch 06).
If the channel is encoded, press
AV to display the pictogram next to the channel number. In
this case, plug a decoder into the blue AV2 connector of the DTH 8005. If the picture is poor, select Fine Tuning using or and adjust with
PR+ or PR-.
10. When the picture and sound of the channel are good, select the line Save using or ,
and assign a channel number with
PR+ or PR- or the number keys. Press OK to store the
number that you have assigned to the channel.
The Channel line is once again highlighted to start a new search. Repeat the procedure from step 9 to search for a new channel or press
MENU to exit the manual set-up.
2_DTH8005_en 9/03/04 17:20 Page 7
Connections and initial set up
8
Channel update
If new channels make their way into the audiovisual scene, you will have to update your DTH 8005’s list of channels. In such a case, start a new channel search from the installation menu. This set-up deletes all stored channels and resets all the channels that your DTH 8005 can receive. If you only want to set-up a single channel, refer to the manual search on page 7.
1. If the main menu is not displayed,press the MENU key.
2. Select the Setup line using the or keys, and press OK to validate.
3. Select the Installation line using the or keys, and press OK to validate.
4. Select the Channel search line using the or keys, and press OK to validate.
An installation window will appear.A cursor shows the progress in the set-up of the channels.When all the channels that you can receive in your area have been stored,
100 % is indicated. Press OK to return to the
Channel search line. Press MENU to return to the
Main Menu.
Clock setting
Your DTH 8005 has an automatic time setting system which recognises the time signals put out by certain channels. If your DTH 8005 is not set at the right time, you can reset it by following the instructions below;
1. If the Main Menu is not displayed,press the MENU key.
2. Select the Setup line using the or keys, and press OK to validate.
3. Select the Installation line using the or keys, and press OK to validate.
4. Select the Clock Setup line using the or keys, and press OK to validate.
5. year is highlighted. Enter the year’s 4 digits
(press 2
, 0, 0, 4 for 2004).
6. Then enter the 4 digits of the date
(press 1
, 5, 0, 5 for 15th May).
7. Enter the 4 digits of the time
(press 1
, 5, 5, 9 for 15:59 (03:59 PM).
8. Press OK to confirm.
Sorting the channels
1.
If the Main Menu is not displayed,press the MENU key.
2. Select the Setup line using the or keys, and press OK to validate.
3. Select the Installation line using the or keys, and press OK to validate.
4. Select the Channel List line using the or keys, and press OK to validate.
Refer to the Channel Sorting paragraph on page 6 to check or sort out the channels stored on your DTH 8005.
2_DTH8005_en 9/03/04 17:20 Page 8
Connections and initial set up
9
EN
EN
DTH 8005
Satellite receiver
TV set
Other recommended connections
Satellite or cable reciever (or decoder)
Carrry out the connection of cable 5 (not supplied).
In grey: connections already carried out (connections from page3).
5
2_DTH8005_en 9/03/04 17:20 Page 9
10
Connections and initial set up
Video recorder
Satellite reciever and video recorder
Satellite receiver
Video recorder
Video recorder
DTH 8005
DTH 8005
TV set
TV set
(not supplied)
(not supplied)
2_DTH8005_en 9/03/04 17:20 Page 10
Connections and initial set up
11
EN
EN
The connections proposed on page 3 permit the rapid connection of your DTH 8005 and ensure optimum sound, visual quality (RGB) and standards. Depending on the sockets available on your other devices or to benefit from the maximum performance of your DTH 8005 you may make other connections.The DTH 8005 has other sockets for this purpose.
1
6
4
Sockets and cables (inputs)
1 - Audio inputs (INPUT L, R)
The analogue sound of an operating device (television set or amplifier) can be input via the 2 Audio sockets L and R of your DTH 8005. If you do not use the recommended connection, i.e. the Peritel (Scart) socket,you must, as well as the video connections (CVBS or S-VIDEO) connect the outputs Audio L and R of the operating device to the Audio L and R inputs of your DTH 8005.
Note: the audio sockets and cables are generally identified by a colour code (white for the left channel and red for the right).
2 – Video in - Composite (CVBS) (COMPOSITE VIDEO INPUT)
The yellow video socket also known as composite video (or CVBS):the image quality provided by this socket is less than all the other video sockets. Only use this socket if all the other sockets are already in use.
3 - S-Video input (Y/C) (S-VIDEO IN)
The S-Video signal is of a lesser quality than that of the RGB signal supplied by the Peritel (Scart) socket.The S-Video signal however gives a better image quality than the composite video socket (C) since black and white (Y) are separated from colour in the video signal.
Note: do not forget to connect the audio cables since the S-Video cable transmits only images, not sound.
RCA sockets and
cables for analogue
L and R audio
signal.
RCA socket and
cable for CVBS
Video signal, also
called Composite.
Ushiden socket and
cable for Y/C Video
signal, also called
S-Video.
372
5
2_DTH8005_en 9/03/04 17:20 Page 11
Connections and initial set up
12
Sockets and cables (outputs)
4 -
Optical and coaxial Out sockets (DIGITAL AUDIO OUT)
The digital sound of a disc being played is permanently available on the optical and coaxial sockets of your DTH 8005. Use one of these sockets by connecting it to a decoder or a DTS or Dolby Digital amplifier. Some of these appliances are equipped with a coaxial In socket (COAXIAL) or an optical In socket (OPTICAL), while others are equipped with both sockets. Choose one of the two connections.
Note: in most cases these two types of connection give similar results;the only difference lies in the type of cable used and the cost of these cables, the coaxial cable being the least expensive one to buy. However it sometimes happens that some coaxial cables are parasitized by high frequency interferences caused by household electrical appliances, high voltage electric cables or radio transmitters.
5 -
S-Video out socket (Y/C) (S-VIDEO OUT)
The S-Video cable provides a video signal of lower quality than the Peritel (Scart) socket.An S-Video signal however provides a better quality image than a composite video socket, because colour (C) is separated from black and white (Y) in the video signal.
Note: do not forget to also connect the audio cables, because the S-Video cable transmits images and not sound.
6 -
Audio outputs (OUTPUT L, R)
The digital sound output from a disc being read is permanently available at the two audio sockets, L and R, of your DTH 8005. If you do not use the recommended Peritel (Scart) connection to the television (paragraph 3 page 3), you must, as well as one of the video connections (CVBS or S­VIDEO) connect the Audio outputs, L and R,of your DTH 8005 to the Audio inputs, L and R, of your television set (or amplifier).
Note: audio sockets and cables are usually identified by a colour code (white for the left channel and red for the right channel).
7 -
Composite Video Out socket (CVBS) (OUTPUT COMPOSITE VIDEO)
The yellow video socket is also called composite video, or CVBS.The image quality delivered by the video socket is the least good of all video connections. Only use this socket if all other sockets are already in use.
Optical socket and
cable for digital
audio signal.
Coaxial socket and
cable for digital
audio signal.
Ushiden socket and cable for Y/C Video
signal, also called
S-Video.
RCA sockets and
cables for analogue
L and R audio
signal.
RCA socket and
cable for CVBS
Video signal, also
called Composite.
2_DTH8005_en 9/03/04 17:20 Page 12
Connections and initial set up
13
EN
EN
Front sockets (inputs)
1 -
S-Video socket
For the connection of a Camcorder or other S-Video device.
Note: do not forget to connect the audio cables since the S-Video socket handles only images and not sound.
2 -
AV sockets (Audio/Video)
The AUDIO-VIDEO connectors allow the viewing or copying of your video sequences from a camcorder or any other AV device that provides a composite video signal and analogue stereo sound.
PULL HERE to open flap.
The connectors located behind the flap on the front allow easy connection in order to view or copy images and sound from a video camcorder.
2
1
2_DTH8005_en 9/03/04 17:20 Page 13
Connections and initial set up
14
PULL HERE to open flap.
The buttons on the front
STANDBY/ON - To switch your
DTH 8005 on or off.
AV - To select the audiovisual sources
(channels or devices connected to the AV sockets):
PR 1 ,2 ,3 - Channel 1, 2, 3. AV 1 - Device connected on AV1 (TV set). AV 2 - Device connected on AV2 (satellite
receiver, decoder, …).
AV 3 - Front AUDIO/VIDEO sockets. AV 4 - Rear AV sockets (S-VIDEO or
AUDIO/VIDEO.
Disc tray.
OPEN/CLOSE - To open and close the
disc tray.
RECORD - To start recording a TV
programme (the red indicator lights up) and if necessary to adjust recording time by pressing repeatedly. Each press on the
RECORD key extends recording time by
30 minutes.
STOP - To stop play (press once) or to
stop recording in progress using the
Channels menu (press twice).
G
REV / FWD
F
Fast forward or reverse (page 32).
PLAY / PAUSE
- To play a disc placed in the disc tray (3) of the DTH 8005.
- Pause during playback (audio CD or mp3) or pause on an image (DVD).
S-Video socket (input) for connection with a Camcorder (page 13).
Audio/Video sockets: to connect a
camcorder or other AV device .
PR- / PR+ / IGSKIP
F
I
To change channels (page 19). Skips forward or backward a chapter (page 33).
Display panel - Displays your DTH 8005’s
modes of operation (page 15).
1
2
3
4
5
6
7
8
9
10
11
12
è 0 h 30 è 1h00 è 1h30 è 2h00 è 2h30 è 3h00è
1
9 10 12
2
11
3 4 5 6 7 8
2_DTH8005_en 9/03/04 17:20 Page 14
Connections and initial set up
15
EN
EN
The messages on the display
TV Functions
With a disc
Other indications
- Main menu displayed on screen (device stopped). No function selected.
- Real-time viewing. TV mode activated; channel 1 being watched.
- Start of recording of TV program on selected channel.
- Channel 1 currently being recorded.
- DVD playback.
- Playback of an Audio CD or VCD.
- Pause of Audio CD or still frame (DVD,VCD).
- Naviclick programmes guide displayed on the screen.
- Indicates the Lock function is activated. (page 49).
- Indication of the selected source:
AV 2: AUDIO/VIDEO input connector at the rear.
AV 3: AUDIO/VIDEO input sockets on the front.
AV 4:AV/ S-VIDEO or AUDIO/VIDEO input sockets at
the rear.
- Fast forward (
u
) or reverse (t).
- Slow motion, forward (
K
u
) or backward (
t
K).
Displays on your DTH 8005 (menus and banners)
Disc menus – Each DVD disc offers a menu, the layout and order of which depend on the editor of the disc.The main menu of the disc is displayed on the screen when a DVD disc is loaded and play begins.You can also, at any time, display the main menu of the disc by using the
MENU button.
Player banners – while a disc is playing back you can display or remove banners using the
INFO key on the remote control unit.The banners appear in the form of a succession of
icons at the top of the screen.
Player menus – your DTH 8005 has menus enabling you to use functions that are not accessible using the remote control unit keys.The player menu is displayed when the DTH 8005 is not playing a disc (in STOP mode).
Note: settings will only function if the corresponding function has been provided by the editor. For instance, if you select the subtitle icon in the banner, subtitles will only appear if they actually exist on the disc. Check the sleeve to see what subtitles are provided. If a menu or icon appears in “grey” it means that the function is not available.
2_DTH8005_en 9/03/04 17:20 Page 15
16
Remote control
The remote control handset supplied with your DTH 8005 is a 3 in 1 type remote control. It allows 3 devices to be controlled: your DTH 8005, a television set and a satellite or cable receiver.Thus you have remote control of all these devices by using the 3 modes:DVD,TV or SAT.CABLE that are accessed by 3 corresponding keys.This page describes the keys that control your DTH 8005 (in DVD mode).
Note: the functions described below depend on the discs and/or the files read.
For description of the TV and SAT.CABLE functions, see the following page.
Description of keys in DVD mode
Signal lamp - this shows the status of the remote control when it
is being used to program or to control another device. It also indicates that the batteries level is low by flashing several times when a key is pressed.
Switches the DTH 8005 on or off.
DVD Sets the remote control unit in DVD mode (by
pressing once), enabling you to control your DTH 8005.
PR Skips forward or backward a chapter (DVD) or
track (CD).
RETURN Returns to the previous menu. MENU Displays the DVD disc menu while a disc is being
played.
CLEAR Removes the menu or banner showing on the TV
screen.
OPEN.CLOSE
Opens and closes the disc holder of the DTH 8005.
ZOOM Enlarges the picture during playback, slow motion
or pause mode.
INFO Displays the DTH 8005 information banner on the
TV screen while a disc is being played.
GUIDE Displays a sub-menu on the disc (where available
on the disc).
ANGLE To access a choice of angles of an image if available
on the disc. (JPEG) To rotate an image through 90°.
0 to 9 Keys used to enter information such as a chapter
or track number, or to make choices from menus.
TV.VIDEO Passes DVD images to the television set connected
to AV1.
REV Fast backward while a disc is being played. PLAY Plays a disc. FWD Fast forward while a disc is being played. REC To record the TV program watched onto the
recordable disc (DVD+R / DVD+RW).
STOP Stops disc playing or recording and displays the
DVD player menu.
PAUSE Pause during playback (CD) or pause on an image
(DVD).
AGAIN Skips backward – each press replays the last
seconds during DVD playback.
ADVANCE To skip forward approximately 30 seconds (DVD)
or to play another track (audio CD).
2_DTH8005_en 9/03/04 17:20 Page 16
Remote control
17
EN
EN
Using the remote control handset to control your television and satellite or cable receiver
The DTH 8005 remote control handset is a 3 in 1 device that allows you to control the operation of 3 devices: your DTH 8005, a television set, or satellite receiver.This page describes the keys that control your television set and your satellite or cable receiver if they have the same functions.
Controlling a TV set
TV Sets the remote control unit in TV mode (by pressing once) and enables
you then to control your TV set. Switches the TV set on or off. Volume control. Switches sound off or on again.
PR Switches channel or selects an AV socket. AV Selects an AV socket. 0 to 9 Keys enter digital values or change channel. ZOOM Enlarges (zooms in on) the picture on some TV sets.
MENU Displays main TV set menu. RETURN Returns to the previous menu.
CLEAR Removes menu or other information displayed on the screen. GUIDE Displays TV programme guide. INFO Displays information about the channel.
Note: colour keys enable one to use the teletext function on THOMSON TV sets.
Controlling a satellite or cable receiver
SAT.CABLE Places the remote control in the SAT•CABLE mode (press once) and
then enables you to control your satellite or cable receiver. To turn on or off the satellite or cable receiver.
PR Switches channel. 0 to 9 Keys enter digital values or change channel.
MENU To display the main menu of the satellite or cable receiver. RETURN Returns to the previous menu.
CLEAR Removes menu or other information displayed on the screen. GUIDE Displays the Naviclick page (if available). INFO To display the info on the channel or operation of the satellite or cable
receiver.
Remote control - Code A-B
With certain devices (combined TV/DVD or other DVD player) it may happen that your DTH 8005 controls the DVD player of the other device. In this case you can adjust your remote control and the DTH 8005 on another code known as code B (adjustment shown on page 60).
2_DTH8005_en 9/03/04 17:20 Page 17
Remote control
18
Programming the remote control
If your remote control does not control your satellite receiver (or cable) or your television set you will need to configure it using one of the two methods proposed: automatic code search or manual programming.
Automatic code search
This method can be used to automatically find the most appropriate code for your appliance.
1. Switch on the appliance you wish to use the remote control with.
2. Press the relevant button for this appliance on the remote control, and
while holding this button down, press the standby button until the remote control light comes on. Release the two buttons.
3. Point the remote control at the appliance and press PLAY.Wait until the
light stops flashing. If the appliance has not gone into standby mode after five seconds, press the
PLAY button again to continue the search for the
next set of codes. Repeat this operation until the appliance goes into standby mode.There are 20 sets of codes.
4. When the appliance goes into standby mode, press the button on the
front to switch it on again.Then press the
REV button to put it back in
standby mode, and if necessary, keep pressing until the appliance goes into standby.
5. Press the STOP button and hold it down until the remote control light
goes off.
Manual programming
This method involves carrying out a manual search for the codes to be used for controlling your other appliances.
1. Switch on the appliance you wish to use the remote control with.
2. Press the corresponding key on the remote control, while holding it
pressed down, enter one of the codes corresponding to the make of the device (Thomson Group codes on the bottom left of this page, other brands can be found in the “Related documents” leaflet).
If the remote control light flashes you have entered the wrong code or it is not possible to program the remote control.
3. Point the remote control at the appliance and press the relevant button.
Press the standby button. If the appliance does not go into standby mode, try another code.
Depending on the year of manufacture and the type of appliance, some functions may not be available.
Certain codes may cover more functions than others.Test the functions you can control and, if appropriate, try other codes.
Note here the code(s) which work best.
Note: when you change the remote control’s batteries, remember to reprogram it.
TV
SAT•CABLE
SAT Codes: 5000, 5001, 5031, 5037, 5043, 5064, 5065, 5066, 5058, 5084.
TV Codes:
1000, 1001, 1002, 1016, 1024, 1033, 1041, 1051, 1089, 1096, 1127, 1128, 1129, 1130, 1134, 1135, 1148, 1151.
2_DTH8005_en 9/03/04 17:20 Page 18
Loading...
+ 42 hidden pages