Technicolor - Thomson 28VT68ND, 32VT68ND User Manual

Manuel d'utilisation Bedienungsanleitung Manualedi utilizzazione Manualde utilización User manual Gebruiks aanwijzing Bruksanvisning Betjeningsvejledning

28VT68ND 32VT68ND

☞

PREFERENCE INSTALLATION

☞

PREFERENCE  INSTALLATION

Volume  Lumière Couleur Contraste Rappel des réglages préférés

Volume maximum Langue GB F D E I S NL Affichage chaîne Non Oui Référence horaire PR 01 Programmation IR (-)Non Oui(+) PR-- Réglage fin Télétexte Non Oui

Rotation image

PROGRAMME AV1 AV2 AV3

Signal S-vidéo RVB Nom CAMCOR

☞

P. VT

ZOOM



REPERTOIRE REVEIL VERROUILLAGE

PR 03 00 01 T F 1 02 F R 2

03 F R 3



04 CANAL +

PROGRAMME AV1 AV2 AV3

Signal S-vidéo RVB Nom VCR 2

HAUT-PARLEUR CASQUE AV

Son Auto/Stéréo Mono Effet Normal Elargi TV Aigues TV Basses

☞

05 ARTE 06 M 6

REPERTOIRE REVEIL VERROUILLAGE

07 08 09

+/- Feuilleter la liste

0..9 Choix d'une chaîne

Arrêt automatique (-/+) -:--

HAUT-PARLEUR CASQUE AV

Casque

☞

REPERTOIRE REVEIL VERROUILLAGE

Entrer vos numéro de code Mémoriser votre code

PROGRAMME AV1 AV2 AV3

Signal S-vidéo RVB Nom VCR 1

☞

HAUT-PARLEUR CASQUE AV

Appareil en AV1/AV2 Stéréo Mono

☞

PROGRAMME AV1 AV2 AV3

Norme (-/+) France Décodeur Aucun AV1 AV2 Recherche Canal terrestre CH 22 Canal câble -- Chaîne 03 Réglage fin Nom de station FR3 Effacer (-) Mémoriser (+)

☞

ZOOM

–

PR.- PR.+

a z

z a

123 456

789

........

RCT3006

THOMSON

IMAGE PIP FORMAT

Lumière Couleur Contraste Digital Mastering Non Oui 

Format 4/3 16/9 Zoom sous-titre Non Oui Position sous-titres Bas(-) Haut (+)

☞

PR- PR+

a z

z a

123 456 789

........

television set

safety precautions

SAFE USE OF THE EQUIPMENT

1. TO TURN ON

10 cm

5 cm

LEAVE ROOM FOR VENTILATION

AVOID HEAT, WATER, DIRECT SUNLIGHT.

Do not place audio loudspeakers near to television. The magnets in the speakers could cause patches of colour to appear on the screen.

10 cm

2. CARE OF THE EQUIPMENT

The screen should be cleaned with liquid glass cleaner.

• Never use abrasive cleaners.

• To clean the front and the cabinet of your equipment use a soft cloth dipped in mild detergent. The use of strong solvents such as white spirits or alcohol based products could damage your equipment.

• Clean the vents on the rear panel of your set regularly.

To ensure your personal safety and the efficient operation of your equipment, please follow the advice given below : Télévision sets need ventilation to avoid overheating which can cause

10 cm

damage to the components. The ventilation slots at the back of the set should not be covered up by curtains, small covers, newspapers, etc… There must be enough room in built-in cabinets to allow for the cooling air to circulate. The set should not be placed directly next to heating.

This appliance is designed for use in dry areas. If occasionally you should whish to operate it outdoors (for example, on the balcony or veranda), you must insure that it is protected against all forms of moisture (dew, rain, splashed water).

A cold set may be switched on in a warm room only after any condensation which may happen to be on the screen has evaporated. Never remove the cabinet back. Have your aerial installed by an authorised dealer or service technician.

In the evenings, after the TV programmes, or in case of a prolonged absence, it is recommended that the appliance be switched off using the main power switch. Even if the ON/OFF switch is in OFF position the television set is not completely separated from the mains. In order to separate it completely from the mains, it has to be disconnected by unplugging the mains plug. Remove the power plug from the wall outlet under the following conditions :

1. During a thunderstorm. It is also recommended that you disconnect the aerial plug.

2. If you find a burning smell or smoke emerging from the set.

Additional information : Your TV set is adequately shielded to prevent emission of X-rays. The acceleration voltage does not exceed the maximum value of 33 kV.

Work by non-qualified technicians, modification of the high voltage setting or the replacement of the tube with a model that does not comply with the manufacturer’s specifications may lead to a considerable increase in X-ray radiation. A set changed in any of the above ways no longer satisfies the initial specifications and should not be put back into service.

3. DEMAGNETISATION

The earth’s magnetic field may have an effect on your television by causing patches of colour to appear on the screen. If this happens :

• Switch off the television with the on-off button ;

• Wait a few minutes and then press again to switch on.

This allows the screen to be demagnetised automatically. If patches of colour are still visible repeat the procedure.

The pages of this publication are printed on recycled paper.

remote control

functions

PROGRAMME Set-up - Preferences Browse - Clock - Lock Tuning - AV1 - AV2 - AV3.

SOUND Audio configuration - Balance - Loudspeakers Headphone - AV (Audiovisual).

PICTURE Picture - PIP - Format.

TELETEXT/TOPTEXT/FASTEXT

remote control

using

When a red, green or yellow button is pressed for the first time, the contents of the menu are displayed at the top of the screen and the menu of the function selected is displayed at the bottom of the screen.

Moving horizontally along in the menus selects the required function on the contents line if it has not been already selected.

- The selected function is displayed in the same colour as the button pressed (red, green, yellow).

Press the coloured button repeatedly to move down through the menus selecting different lines.

- The line selected in the menus is displayed in the same

colour as the button pressed (red, green, yellow).

ZOOM

–

PR- PR+

a z

z a

123 456 789

........

PERSONAL ADJUSTMENTS and scrolling back through the menus.

TO REMOVE THE MENU DISPLAY or to display programme information, the type of sound transmission (MONO, STEREO or DUAL), the programme name and number, the time.

PICTURE FREEZE

ZOOM FUNCTION

TO CALL UP PREVIOUSLY VIEWED PROGRAMME

TO SCROLL THROUGH THE PROGRAMMES

VOLUME

- Horizontal movement in the menus

- -/+ adjustments of other functions.

Keys 1 to 0 are used to :

- Select the programmes (from 1 to 99)

- Enter the channels numbers

- The 0 key is used to call AV inputs 1, 2 and 3.

MUTE

STAND-BY

BATTERIES : Refer to page 30 for the fitting of the batteries.

Changes are saved when you quit the menus, except in the PROGRAMME menu.

CONNECTIONS AND COMMANDS 5/6 AUTO-PROGRAMMING 7/9

Switching on - Automatic station search Programme organiser - New region

INSTALLATION 9/10

Volume limitation - Menu language Programme number display - Time reference Preferred settings

PICTURE ADJUSTMENTS 11/14

PIP - Format

SOUND ADJUSTMENTS 14/19

Pro Logic - Loudspeakers - Headphone - AV

DAY TO DAY OPERATION 20/21

Switching on/Selecting programmes - Browse

OTHER FUNCTIONS - EXTRAS 22/25

Clock - Child lock - Lock

CONNECTIONS 26/30

Units connected - Calling up audiovisual programmes -

TELETEXT 31/33

Calling up Teletext - Options - Alarm - How to select Subtitles - New flash

MANUAL PROGRAMMING 34/35

Norm - Decoder - Channel/Cable - Programme - Fine Tuning - Station name - Store/Erase - Access to the organiser.

Make any adjustments.

television set

connections and commands

For further details,

see page 26.

ON THE FRONT SIDE

Connect to A.C. main supply 220-240 V ~ 50 Hz

On/Standby light : Green : On Red : Standby

M/A

ON THE RIGHT  SIDE OF  THE TV-SET

PR +

OSD

INSTAL

PR +

OSD

INSTAL

On/Off Switch

Programme Selection

Volume adjustments

Display

Installation-menu  access button

television set

connections and commands

AT THE BACK

AV3

S-VHS and audio sockets

L = Left

VIDEO L AUDIO R

Headphone  socket Ø 6,35 mm

VHS and audio sockets

Connect respectively the red and black terminals of the supplied speakers to the television’s red and black terminals.

Front speaker

AV3

RCL

R = Right

Front speaker

Ideal setting

Front speakers

Listening

area

Surround speakers

Camcorder

S-VHS

or VHS

Aerial*

AV1

Camcorder

Surround speaker

Inoperative in 

Pro Logic mode

Video recorder

Unit 1 Unit 2

Decoder

Video games consoleCDV player

Surround speaker

Ψ 75

AV 1

Satellite receiver

AV2

(IN)

S-Video Video Audio

(OUT)

AV 2

AV2

Camescope

Video recorder

* We recommend that you use an aerial cable with double isolation.

television set

auto-programming

This set is equiped with an automatic station search system which is used for :

• Searching for all the stations received in your region and storing them in memory

• Automatically searching for the name of the station

• Automatically allocating a programme number.

WELCOME

Turn on the television set main power. The WELCOME menu is displayed.

If it is not, Press the INSTAL button on the television set control panel.

Briefly press the remote control button corresponding to the

INSTAL

a z

number of the language you require for the menus.

A list of countries appears (on two pages). To go to the next or previous page, press

WELCOME

BIENVENUE

WILLKOMMEN

BIENVENIDO

BENVENUTO

VÄLKOMMEN

ENGLISH FRANÇAIS DEUTSCH ESPAÑOL

ITALIANO

SVENSKA NEDERLANDS

UK : [ 1 ] FRANCE : [ 2 ] GERMANY : [ 3 ] ITALY : [ 4 ] SPAIN : [ 5 ] PORTUGAL : [ 6 ] SWISS : [ 7 ] AUSTRIA : [ 8 ] Next page : [ 9 ]

WELKOM

Press

key number

Appuyer

sur la touche

Drücken

Sie die Taste

Pulse

tecla numero

Premere

il tasto

Tryck

knapp nummer

Druk op

knop nummer

CHOOSE YOUR COUNTRY :

[1] [2] [3] [4] [5] [6] [7]

Briefly press the remote-control button corresponding to the country in which you are located, for example: for England

a z

The menu which then appears permits the user to:

a z

• start an automatic search,

• search for new channels,

• access channel organisation.

z a

You can leave the menus at any time by pressing the button.

AUTO - PROGRAMMING

at the bottom of the menu (grey background).

For the first time or after a change of region :

a z

start automatic channel search by pressing the button

Searching for stations and storing them in the memory depends on the language chosen from the WELCOME menu.

The previously memorised stations are erased. AUTO-PROGRAMMING is completed when the cursor is at

the extreme right. To interrupt the search, press briefly on the key, this displays the channel management menu.

 NETHERLANDS : [ 1 ]  BELGIUM : [ 2 ] LUXEMBURG : [ 3 ] SWEDEN : [ 4 ] DANMARK : [ 5 ] FINLAND : [ 6 ] NORWAY : [ 7 ] OTHERS : [ 8 ] Previous page : [ 9 ]

AERIAL INSTALLATION

Make sure that the aerial cable

and decoder (if any)

are connected to this TV set.

[ 1 ] Launch terrestrial installation [ 2 ] Update the terrest. installation [ 3 ] Access to the organiser

To help you, follow the instructions

AUTO - PROGRAMMING

Searching for stations

10 stations found

CHILD

06 O S

television set

auto-programming

Programme Organiser

When the automatic search is completed, the Programme Organiser menu appears.

Scan through to check that the stations found are correctly numbered and named as you want than:

• IF YES ➡ press briefly

the menu disappears and is replaced by the picture of the programme selected.

• IF NO ➡ you make changes as follows

- The programme number

Select the programme number to be changed.

Bring the cursor to the new programme number.

You may also use the number buttons 0 to 9.

Confirm the change (green button).

- The station name

Press the blue button briefly. A list of station names per country appears

United Kingdom Nederlands France Belgique Deutschland Luxembourg Italia Sverige España Danmark Portugal Finland Schweiz Norge Österreich

Select the country you require.

If the name appears in the list displayed,

select the name Confirm the selection (green button).

If the name does not appear in the list displayed,

select the "- - - - - -"line

You have 6 characters to enter a station name

To enter a station name, Press the green button briefly and the first character flashes.

Select the first character of the new name. Enter the next character

and repeat the process up to the last character. Confirm your choice (green button). The new name is stored in the memory and the list disappears.

PR.- PR.+

This menu is used to :

• change the programme number,

• change the station number,

• delete a programme.

Programme Organiser

01  02  03

04 

05 06 07 08 09

PR+, PR- Select a station +, -, 0..9 Move this programme Blue Change the name Yellow Erase this station

01 

To exit, press the (TV) key

02  03 04 05

06

07 08 09

Moving PR 06 BBC to PR 04 +, -, 0..9 Give it another number Green Confirm change Red Cancel change

Programme Organiser

01  02  03 04 05

06

07 08 09

+, - Next/Previous name page PR+, PR- Select a new name Green Confirm change Red Cancel change

07 08 09

PR+, PR- Select a station +, -, 0..9 Move this programme Blue Change the name Yellow Erase this station To exit, press the (TV) key

+, - Next/Previous position PR+, PR- Select a character  Green Confirm new name Red Cancel new name

+, - Next/Previous position PR+, PR- Select a character Green Confirm new name Red Cancel new name

PR+, PR- Select a station +, -, 0..9 Move this programme Blue Change the name Yellow Erase this station To exit, press the (TV) key

United Kingdom

BBC 1 BBC 2 I T V CHAN 4 CHAN 5

SKY +

M-GOLD M-CHAN CHILD C N N

C N N



C N N

SKYONE DISCOV UKGOLD SKYSPO BRAVO ESPORT S-NEWS M T V EUNEWS

- - - - - - -

S-

television set

auto-programming

To delete a programme

Select the programme to be deleted.

Press the yellow button.

Confirm your choice (green button).

The programme is deleted the following programme is selected.

You may cancel any unconfIrmed command (change of programme number or channel name, programme erasure) by pressind the red button.

PR.- PR.+

New channels

To search only for new channels.

Press the television set INSTAL button.

Select the country and press the button

When search is finished, the Programme Organiser menu appears. Reorganise the programmes. To do this, follow the instructions given on the previous page.

To make the menu disappear, press

INSTAL

z a

01 BBC 1 02 BBC 2 03 04 05 06 07 08

09 CANAL+

 Erase PR 04 CANAL+ Green Confirm erase R ed Cancel erase

Turn on the television set by pressing

one of the buttons from 1 to 9.

installation

• Limit the maximum volume.

• Change the menu language (German, Spanish, French, English, Italian, Swedish, Dutch),

• Permanently display the number of the programme being watched,

• Store the time reference programme number,

• Compensate for variations due to the earth's magnetic field.

SET-UP

Press the yellow button then the (-) button.

The SET-UP menu is displayed

Maximum Volume Limitation

Select the Max. Volume line (yellow button).

Set the maximum volume with the cursor.

The volume cannot be set to zero when using this function.

With this menu you may:

PREFERENCES SET-UP

Max. Volume Language GB F D E I S NL Programme Display Off On Time reference PR 01 IR download (-) No Yes (+) PR-- Teletext Fine Tuning Off On Picture rotation

Max. Volume

Language GB F D E I S NL Programme Display Off On Time reference PR 01 IR download (-) No Yes (+) PR-- Teletext Fine Tuning Off On Picture rotation



television set

installation

Menu language

Select the Language line (yellow key). Select

GB : English F : French D : German

I : Italian S : Swedish NL : Dutch

E : Spanish

All the menus will be displayed in the language selected.

Programme number display

Select the Programme Display line (yellow key). Select : • Off no permanent display.

• On the programme number

is permanently displayed

Time reference

Select the Time reference (yellow key). The television set internal clock must be set. This synchronises automatically when the television set is turned on to a programme broadcasting Teletext, you can opt to select any one of the 4 channels - BBC1, BBC2, ITV, CH4. Select the corresponding programme number.

PR.- PR.+

The IR download line has no effect on your TV set.

Teletext Fine Tuning

This adjustment allows writing errors (missing letters) on the teletext pages of French networks (L Standard) to be reduced. To do this,

On must be selected in the Teletext Fine Tuning line.

This adjustment is not active for B, G, D, K, K' and I standards.

Magnetic field correction

This adjustment compensates for disturbances due to the Earth’s magnetic field. Select the Picture rotation line. Adjust so that the selected menu is horizontal if it was not before.

PREFERENCES

This menu enables you to save your preferred settings. Press the yellow or pink key repeatedly to return to the Menu contents line.

Press to display the PREFERENCES menu. Select the line required with the yellow key. Set with the key. Erase the menu. To return to your preferred settings at any time,

press the pink key.

PREFERENCES SET-UP

Max. Volume

Language

Programme Display Off On Time reference PR 01 IR download (-) No Yes (+) PR-- Teletext Fine Tuning Off On Picture rotation

Max. Volume Language GB F D E I S NL

Programme Display Off On

Time reference PR 01 IR download (-) No Yes (+) PR-- Teletext Fine Tuning Off On Picture rotation

Max. Volume Language GB F D E I S NL Programme Display Off On

Time reference PR 01

IR download (-) No Yes (+) PR-- Teletext Fine Tuning Off On Picture rotation

Teletext Fine Tuning Off On

Max. Volume Language GB F D E I S NL Programme Display Off On Time reference PR 01 IR download (-) No Yes (+) PR-- Teletext Fine Tuning Off On

Picture rotation

GB F D E I S NL



PREFERENCES SET-UP

Volume Brightness Colour Contrast

PREFERENCES SET-UP

Resets to these preferences

Volume

Brightness Colour Contrast Resets to these preferences

television set

picture adjustments

You may adjust the picture

settings at any times.

PICTURE

Press the green key.

The PICTURE menu is displayed : PICTURE is selected.

If this is not the case, select the Contents line using the green key and Picture with the key.

Select the Brightness line (green key).

Adjust the brightness.

Repeat the same procedure to select and adjust the Colour, and Contrast.

The TINT line only appears if the source is NTSC from an AV1, AV2 or AV3 audio-visual programme.

Digital Mastering

Select the Digital Mastering line (green key).

Select the option required.

When changing channels, Digital Mastering automatically returns to On.

The process suppresses flicker from the TV image. In addition, Digital Mastering improves image quality with a further reduction of the trembling effect. The images are more stable, sharper and less straining to the eyes. Finally, image noise is reduced automatically according to reception quality (INR system : Intelligent Noise Reduction).

PIP (Picture in picture)

Gives you several possibilities

for programmes inlays.

PICTURE PIP FORMAT

Brightness Colour Contrast

PICTURE PIP FORMAT

igital Mastering

Brightness

Colour Contrast D

igital Mastering

Brightness Colour Contrast D

igital Mastering

Tint

PICTURE PIP FORMAT

Off On

Off On

Brightness Colour Contrast

Digital Mastering Off

You use this function to :

• inlay in one of the corners of the screen (P I P) :

– images from the input connectors (AV1, AV2, AV3 or RGB),

while viewing a channel ;

– or one of the channels, while viewing a programme from one

of the audiovisual input connectors (AV).

• inlay on the screen in groups of 12, all the channels in memory

(Channel guide).

Press the green button once or several times to select the Contents line.

Select P I P. The PIP menu appears.

PICTURE PIP FORMAT

PIP Off 0n

Source (-) 03 (+) Channel Guide (+) Change Corner 1 2 3 4

television set

picture adjustments

Image inlay (PIP)

Use the green button to select the PIP line.

Press briefly to select : Off : no picture in picture

On : picture in picture

Use the green button to select the Source line. As required select :

the AV1, AV2, AV3 or RGB picture, or a channel in memory.

Picture in picture is in 4/3 or 16/9 format depending on the format of the AV image.

Inlaid image position

Use the green button to select the Change Corner line.

Select position 1, 2, 3 or 4.

Press to erase the menu.

Picture swap

Press the button,

PICTURE PIP FORMAT

PIP Off On

Source (-) 03 (+)

Channel Guide (+) Change corner 1 2 3 4

PICTURE PIP FORMAT

PIP Off On Source (-) 03 (+) Channel Guide (+)

Change corner 1 2 3

to swap the image being viewed and the PIP image.

Scanning all inlaid image programmes

Select an AV image on the screen.

Repeatedly press the PR +/- button on the remote control to scroll through PIP displays of all stored programmes and the other AV programmes.

Press a long time to remove the PIP.

0/AV

television set

picture adjustments

Mosaic

You can display on the screen, in group of

12, all the channels stored in memory.

Press the green button once or several times to select the Contents line.

Select P I P.

Press the green button repeatedly to select Channel Guide.

Press the key. The screen goes grey and the channels become inlaid With the corresponding programmes numbers superimposed.

The Channel Guide programmes change every 3 seconds.

When the Channel Guide appears, the sound goes off.

To display the programme you want on screen, press the button when the image of that programme is animated

Activating the Channel Guide feature cancels any inlays.

To clear the Channel Guide, press the TV button.

FORMAT

Press the green button once or several times to select the Contents line.

PICTURE PIP FORMAT

PIP Off On Source (-) 03 (+)

Channel Guide (+)

Change corner 1 2 3 4

PICTURE PIP FORMAT

Select FORMAT.

The following menu is displayed.

Format

Select the Format line (green key).

Select 4/3 or 16/9 depending on the picture format.

The Subtitles Zoom line only appears when 4/3 is selected. Some transmitters can transmit a format command W.S.S. (Wide Screen Signaling). Your television set adapts automatically to the format being transmitted (e.g. Cinemascope, subtitles, 16/9). In the absence of this command, the image returns to the last format selected with the Zoom button. The format can also be selected automatically when the source is one of the two Euro-AV sockets AV1 or AV2. In this case, select AUTO which is only displayed for sources AV1 and AV2. The format is stored in memory for AV1, AV2 and AV3.

Format 4/3 16/9 Subtitles Zoom Off On

PICTURE PIP FORMAT

Format 4/3 16/9

Subtitles Zoom Off On

PICTURE PIP FORMAT

Format 4/3 16/9 Auto

television set

picture adjustments

Subtitles Zoom

Select the Subtitles Zoom line (green key).

You may select Off : programme without subtitles.

In this case, an additional line (Subtitles position) appears

You may choose between a higher or lower framing, for example, for sub-titled programmes.

Select Subtitles position (green key),

then set your picture lift.

Remove the menu from the screen.

television set

sound adjustments

Dolby* Surround Pro Logic

On : subtitled programmes.

PICTURE PIP FORMAT

Format 4/3 16/9

Subtitles Zoom

PICTURE PIP FORMAT

Format 4/3 16/9 Subtitles Zoom Off On

Subtitles position Down (-) up (+)

Off On

Derived from the DOLBY STEREO system used in cinemas, Dolby Surround Pro Logic enables you to re-create the acoustic environment of the cinema in your own home (with a Dolby Surround signal), or to obtain enhanced sound effects (with a mono or stereo signal).

You have three options :

• Connect two sets of speakers (Pro Logic),

• Connect one set of speakers (Dolby Surround or Dolby 3 Stereo),

• Use the television sound system only (Pro Logic mode off).

Make sure that the following steps are carried out in the order shown.

• Turn off the television at the main power switch.

• Connect the speakers to the appropriate sockets and make sure that the black speaker terminals on the speakers are connected to the black terminals on the television, and likewise for the red terminals.

• Configure the television for the speakers that are connected or for the acoustic effect you wish to obtain.

• Balance the acoustic environment. When these steps have been completed, you can carry out the other sound settings.

* “ DOLBY “ and the double D symbol are registered trade-marks belonging to the Dolby Laboratories Licencing Corporation.

television set

sound adjustments

CONNECTING THE SPEAKERS

To benefit from the Dolby Surround Pro Logic system, you must connect to your television set 4 loudspeakers :

- 2 front speakers

- 2 surround speakers

Front speaker

Surround speaker

To select the speakers you have connected, you must configure your television set :

SPEAKER CONFIGURATION

The following menu is displayed:

Select the Configuration line.

Depending on the speakers connected, or the audio effect preferred, choose one of the configurations offered.

CONFIGURATION

}

Speakers, ref. DPL 4 K delivered

RCL

Press 2 times

Mono signal Stereo signal

Front speaker

Surround speaker

SPEAKER CONFIGURATION BALANCE

Configuration 1 2 3 4

L  TV  R  S S

ACOUSTIC EFFECT

1 TV speakers only Stereo effect Wide stereo 2 TV speakers + Stereo effect Wide stereo

Front speakers or Dolby 3 Stereo

3 TV speakers + Matrix* Dolby Surround

Surround speakers or Hall

4 TV speakers +

Front speakers + Matrix*

Surround speakers

*Matrix : sound delay in the rear speakers.

Press briefly to remove the menu.

Pro Logic

or Hall

television set

sound adjustments

LOUDSPEAKERS

Press the red button The following menu is displayed: LOUDSPEAKERS is selected.

If this is not the case, select the Contents line with the red key and LOUDSPEAKERS with .

LOUDSPEAKERS HEADPHONES AV

Sound Auto/Stereo Mono Effect Normal Wide TV Treble  TV Bass 

Select the SOUND line.

This varies depending on the sound type received:

SOUND MONO/STEREO or NICAM Stereo*

SOUND DUAL (2 languages)

SOUND NICAM 3*

SOUND AV

Select the required sound for the loud speakers.

For normal operation, AUTO/STEREO position is recommended. STEREO or MONO will be selected automatically depending on the signal received.

*NICAM is a digital sound transmission system, it enables you to receive broadcasts in high quality STEREO or DUAL SOUND. Analogue MONO sound is transmitted simultaneously, (MONO in NICAM STEREO or SOUND 3 in NICAM 3).

Effect

Select the LOUDSPEAKERS line

The number and type of selections available varies according to the configuration selected (see p. 15).

Depending on the selected configuration,you will be able to choose betwen 2 or 3 of the following options : Normal, Wide, Hall, Dolby.

Sound Auto/Stereo Mono

Sound Auto/Stereo  Mono

Sound Sound 1 Sound 2

Sound Sound 1 Sound 2 Sound 3

Source Stereo Sound 1 Sound 2

LOUDSPEAKERS HEADPHONES AV

Sound Auto/Stereo Mono

Effect

Normal Hall Dolby

Treble  Bass  TV treble  TV bass 

Select the type of sound required. According to which selection and configuration is chosen (see

page 15), you will obtain one of the sound effects shown on the table below.

When the type of sound received changes (mono to stereo or vice versa), the sound effect automatically becomes that selected for the type of sound received.

Press briefly to remove the menu.

television set

sound adjustments

CONFIG.

AUDIO

SOUND

Normal Wide Hall Dolby

EFFECT SELECTION

1 Mono Mono Pseudo-Stereo

Stereo Stereo Wide stereo

2 Mono Mono Pseudo-Stereo

Stereo Stereo Wide stereo Dolby 3 Stereo

3 Mono Mono Matrix

Stereo Stereo Hall Dolby Surround

4 Mono Mono Matrix

Stereo Stereo Hall Pro Logic

BALANCE

Press the SOUND button then the (–) button. The following menu is displayed :

The menu varies depending on which configuration is selected.

• Configuration 1

Select the Left/Right line. Balance the sound between the two audio channels.

• Configuration 2

Adjust the balance on the front speakers, and the sound level on the central loudspeakers as shown in the chapter BALANCING THE ACOUSTIC ENVIRONMENT.

SPEAKER CONFIGURATION BALANCE

Left/Right

SPEAKER CONFIGURATION BALANCE

Test Signal  Off On Left/Right Centre  Volume

• Configuration 3

Adjust the balance on the front speakers and the sound level on the surround speakers, as shown in the chapter BALANCING THE ACOUSTIC ENVIRONMENT.

• Configuration 4

Adjust the balance on the front speakers and the sound level on the surround speakers, as well as the sound level on the central loudspeakers as shown in the chapter BALANCING THE ACOUSTIC ENVIRONMENT.

Press briefly to remove the menu.

SPEAKER CONFIGURATION BALANCE

Test Signal  Off On Left/Right Surround Volume

SPEAKER CONFIGURATION BALANCE

Test Signal  Off On Left/Right Surround Centre  Volume

television set

sound adjustments

BALANCE THE ACOUSTIC ENVIRONMENT

When you have selected the configuration you require, you can then balance the acoustic environment (except for selection 1 : TV only).

The instructions given below explain how to set up the configuration (selection 4).

With the BALANCE menu displayed Select the Test Signal line.

Press the + or - button to highlight On in red letters.

The sound from the programme being watched is replaced by a ”white noise” sound which is transmitted to each of the channels in turn (Left, Center, Right and Surround). The adjustment consists of balancing the sound level of the four channels so that the noise has the same sound level on each of them.

Select the Left/Right line

Balance the sound level for the speakers on the right and on the left.

Select the Surround line.

Using the + or - buttons, increase or reduce the sound level for the rear speakers (Surround).

Select the Centre line.

Increase or reduce the sound level on the television speakers.

SPEAKER CONFIGURATION BALANCE

Test Signal  Off On Left/Right Surround Centre 

SPEAKER CONFIGURATION BALANCE

Volume

Test Signal  Off On

Left/Right Surround Centre  Volume

SPEAKER CONFIGURATION BALANCE

Test Signal  Off  On

Left/Right

Surround Centre  Volume

Test Signal  Off  On Left/Right

Surround

 Centre  Volume

Test Signal  Off On Left/Right Surround

Centre

 

Volume

The above settings are correct when the sound level for the noise is identical on each of the channels.

Press repeatedly to select the Test Signal line.

Briefly press the + or - buttons to highlight Off.

TONE ADJUSTMENT

The following menu is displayed : LOUDSPEAKERS is selected.

Select the Treble and Bass lines in turn, and

increase or reduce the treble or bass frequency level on the speakers, and the level on the front speakers if they are connected.

Press briefly to remove the menu.

Test Signal  Off On

Left/Right Surround Centre  Volume

LOUDSPEAKERS HEADPHONES AV

Sound Auto/Stereo Mono Effect Normal Hall Dolby

Treble

 Bass TV Treble TV Bass 

television set

sound adjustments

HEADPHONES

Press briefly The following menu is displayed :

HEADPHONES is selected.

If this is not the case, select the Contents line with the red button and HEADPHONES with .

Select the Headphone line (red key).

You can then adjust the volume for the headphone.

Note : When the transmission is multilingual (DUAL) or an AV programme, the following menu appears. It is possible to select Sound 1 or Sound 2 in the headset.

Select the Source line: then select Sound 1

or Sound 2

The sound output on sockets AV1 and AV2 must be adjusted according to the type of headset connected.

Press briefly.

The following menu is displayed : AV is selected.

If this is not the case, select the Contents line with the red key and AV with .

LOUDSPEAKERS HEADPHONES AV

 Headphones



Headphones

Source Sound 1



Headphones

LOUDSPEAKERS HEADPHONES AV

AV Device Stereo Mono

LOUDSPEAKERS HEADPHONES AV

Sound 2

Select the AV Device line (red key).

Then select Stereo = stereo VCR

Mono = mono VCR

Selecting stereo permits simultaneous recording of both languages of a bilingual programme on a stereo video recorder : Sound 1 on the left track and Sound 2 on the right track. The sound available at the AV1 and AV2 outputs must be adjusted according to the type of device connected.

Press to remove the menu from the screen.

AV Device Stereo Mono

television set

day to day operation

SWITCHING ON / SELECTING PROGRAMMES

Switch on the television set with the mains switch if the standby light is off.

If the standby light is on, select the programme required by the remote control or the PR-/+ buttons on the front of the set.

For the programmes 1 to 9 : Press the corresponding number briefly.

For programmes 10 to 99 : Hold on to display the tens.

Press briefly to display the units.

PR.- PR.+

a z

0/AV

a z

BROWSE

PR 02 BBC 2

PR 1 -

PR 14

This comprises 10 pages of 10 programmes each, giving for each programme number : the station name (if it has been programmed).

The BROWSE menu is displayed.

To select the directory page displayed.

To select the other pages, press repeatedly. Example : Page 6 (programmes 50 to 59)

Press 5 times

To select a programme from the page displayed, press only the unit digits of the programme selected (example for 53: press 3).

Programme PR 00 corresponds to the last audiovisual programme (AV1, AV2 or AV3).

Press briefly to select BROWSE again.

Press briefly to remove the directory from the screen.

Volume

Set the volume as desired.

When the headphones are plugged in, you can adjust the volume of the headphones or loudspeakers :

Select the line you wish to adjust.

Sound mute

Pressing once turns the sound off. The sound returns if the button is pressed once more.

BROWSE CLOCK LOCK

PR 02 BBC 2 00 05 MOVIES 01 BBC 1 06 S-NEWS

02 BBC 2 07 M-GOLD

03 I T V 08 M-CHAN 04 CHAN 4 09 CHILD

+,- Next / Previous page

0..9 Select a programme

BROWSE CLOCK LOCK

PR 02 BBC 2 00 05 S-NEWS 01 BBC 1 06 MOVIES

02 BBC 2 07 M-GOLD

03 I T V 08 M-CHAN 04 CHAN 4 09 CHILD

+,- Next / Previous page

0..9 Select a programme

PR 53 50/AV 55 51 56 52 57

53 58

54 59

+,- Next / Previous page

0..9 Select a programme

Volume

Headphones

Loudspeakers



Mute

television set

day to day operation

RETURN TO PREFERRED SETTINGS

Press briefly to return to personal adjustments (PREFERENCES menu)

DISPLAY / ZAPPING

Displays details of the station being watched (programme name and number, time).

Zoom 1 11 : 35

Press repeatedly to scroll through the programmes.

PR.- PR.+

PICTURE FREEZE

Press key,

The picture freezes instantly

The transmission continues

The still picture cannot be recorded.

Press briefly to return to the programme being viewed.

LAST PROGRAMME VIEWED

This function is used to switch rapidly between 2 programmes.

Press the key. The previously viewed programme is selected.

ZOOM

Press to enlarge or reduce the picture. Zoom O Zoom 1 Zoom 2 Zoom 3 Zoom 4

(4/3)

(full screen

picture)

(Subtittle) (Wide picture) (16/9)

Zoom O Zoom 1 Zoom 2 Zoom 3 Zoom 4

–

ZOOM

–

Zoom 2 : image enlarged and moved up for easier reading of subtitles.

STAND-BY

........

Press briefly, the Stand-By light turns red to indicate

........

that the set is now in standby.

AUTOMATIC STOP

The set is automatically switched to standby a few minutes after the station being watched stops broadcasting.

PR 06 MOVIES

Last programme viewed

Zoom

ZOOM

Stand-By

P. VT

ZOOM

PR.- PR.+

a z

z a

123 456 789

0/AV

........

Display

Picture

freeze

Zapping

television set

BROWSE

CLOCK

LOCK

other functions - extras

CLOCK

Select CLOCK

The Sleep-timer line is displayed.

Sleep-timer

Select the Sleep-timer line (yellow key).

Set the time in steps of 15 minutes (up to 4 hours).

Remove the menu from the screen. The set will switched to standby at the end of the timer interval.

You can display the time left before the stop time. Press the TV key briefly

One minute before sleep timer time, the screen displays that sleep timer is imminent.

The standby lamp flashes to indicate the CHILD LOCK state. The television set can only be turned on with the remote

control.

You may cancel sleep timer command. Select the Sleep-timer line.

Press repeatedly to return to : - : - Remove the menu from the screen.

BROWSE CLOCK LOCK

Sleep-timer (-/+) - : - -

Sleep-timer (-/+) 2 : 1 5

Sleep-timer (-/+) 0 : 0 1

Sleep-timer (-/+) 1 : 4 5

Sleep-timer (-/+) - : - -

Putting the television set on standby when a sleep timer command is programmed, also cancels this function.

Clock (automatic on)

You can programme your television set to switch on automatically to the programme of your choice. The internal TV clock must be set to the correct time.

Press briefly on the key.

Select the CLOCK menu.

Select the Wake-up time line (yellow key).

The first figure flashes.

BROWSE CLOCK LOCK

Sleep-timer (-/+) - : - -

Wake-up time 00:00

Mode Off Once Daily Programme 01 Current time 00:11

television set

other functions - extra

To set the clock to the right time.

Enter the Wake-up time using 24 hour format.

Select the Mode line (yellow key). Select Off = the alarm is off

Once = the alarm will only go off once

Daily = the alarm will go off everyday

If a new alarm is programmed, Once is selected automatically.

Select the Programme, line (yellow key). Select the programme for the alarm. Remove the menu from the screen.

Turn the television set on to standby. It will turn on automatically at the time programmed and turn off one hour after.

If the set is switched on before the alarm function is actived, it will not switch to the programme selected for the alarm at the programmed time.

It is possible to programme both the automatic switching off (STANDBY) and switching on (ALARM) of the set. In this case the automatic switching on time must be programmed to take place after the switching off time.

0/AV

........

BROWSE CLOCK LOCK

Wake-up time 06:45

Wake-up time 06:45

Mode Off

Programme 01 Current time 00:11

Wake-up time 06:45 Mode Off Once Daily

Programme 01

Current time 00:11



Once Daily

CHILD LOCK

You can prohibit the use of your television set using the keypad. Use of the TV set is prohibited :

- after the sleep timer function ;

- when the set is switched to standby and a sleep timer

........

command is programmed ;

- when the set is turn off at the mains and a sleep timer command is programmed ;

- when a wake-up command is programmed.

- after switching off the TV set by holding down the standby button on the remote control for more than 3 seconds.

The CHILD LOCK function is indicated by the flashing of the indicator lamp.

The set can only be switched back on using the remote control.

television set

other functions - extra

This function enables you, for example,

be “unlocked“ with a PIN number

LOCK

to prevent your children from watching certain programmes by

“locking“it so that the set cannot be switched on. The set can

Press the yellow key to select the menu Contents line,

BROWSE CLOCK LOCK

then the volume (+) key to select LOCK. The following menu is displayed.

Enter your PIN number

Press the yellow key briefly to select the line

Enter your PIN number.

Then enter your PIN number figures (example : 1111). The menu displays :

Press the yellow button briefly to select the line

Store your PIN number.

Press the volume (+) key briefly. The code is stored in the memory and the menu displays :

Change your PIN number

Enter the your new code numbers (example : 1234). The previous menu then returns. Press the yellow button briefly to select the line

Store your PIN number.

Press the volume (+) key briefly. The new code is stored in the memory and the menu displays :

To cancel a lock, perform the above steps by entering “0000” at the “Change your PIN number” line. When you enter a code for the first time, the figures replace the dashes ; where not, the dashes are replaced by an asterisk.

If your previous code has been divulged.

Enter your PIN number - - - -

Enter your PIN number 1 1 1 1

Store your PIN number (+)

Enter your PIN number 1 1 1 1

Store your PIN number (+)

Change your PIN number - - - -

Access the programme list (+)

Change your PIN number 1 2 3 4

Access the programme list (+)

Change your PIN number 1 2 3 4

Store your PIN number (+)

Change your PIN number - - - -

Access the programme list (+)

Change your PIN number Access the programme list (+)



* * * *

Access the programme list

Press the yellow key briefly to select the line

Access the programme list (+).

Press the volume (+) key briefly. A page of the directory appears depending on the programme being watched (example : page 1, programme 6 : M6).

Select the programme you wish to Lock or Unlock :

PR.- PR.+

BROWSE CLOCK LOCK

Change your PIN number - - - -

Access the programme list (+)

television set

other functions - extra

ZOOM

To Lock, briefly press the zoom (+) key

the programme locked turns to red, or

ZOOM

To Unlock, briefly press the zoom (-) key

–

the programme unlocked turns to blue.

To lock or unlock other programmes :

• Select the directory range with the keys

• Select the programme, including the audiovisual programmes

PR.- PR.+

AV1, AV2 or AV3 with keys

ZOOM

• Lock the programme with the key

• Unlock the programme with the key

ZOOM

–

After locking or unlocking all of the required programmes, erase the menu with the key

The locked programmes cannot be obtained using the Pr -/+ keys on the remote control and the keypad. If they are selected using the remote control number buttons, the following message is displayed on the screen :

• If you do not enter the right code, the message Incorrect PIN number will appear above the first one.

The programme does not change and after a few seconds, both messages disappear.

• If you enter the right code, the programme selected appears immediately.

When the code is entered once to unclock a programme, all of the programes which were locked are also unlocked. The lock will be re-activated after the set is turned off.

ACCESS TO THE STATION TUNING MENUS

When there is at least one programme locked, access to the station tuning menus Auto-Programming and Manual Programming is also locked. If you call up one of these menus, the following message appears on the screen.

Briefly press the yellow key to select the line Enter your PIN number if it is not already selected.

BROWSE CLOCK LOCK

PR 06 MOVIES

00 01 BBC 1 02 BBC 2 03 I T V 04 CHAN 4 

Select a programme with PR+, PR - Lock / (Unlock) with ZOOM + / (ZOOM -)

To access this programme Enter your PIN number - - - -

05 S-NEWS

06 MOVIES

07 M-GOLD 08 M-CHAN 09 CHILD 

Incorrect PIN number

To access this programme Enter your PIN number - - - -

To access this menu

Enter your PIN number

To access this menu

Enter your PIN number - - - -

* * * *

Enter your code number and the menu appears immediately If the code is not correct, the message Incorrect PIN number appears for a few seconds.

If you forget your personal code, see last page of instructions booklet .

Incorrect PIN number

To access this menu Enter your PIN number - - - -

television set

connections

VIDEO RECORDER CONNECTIONS

VIA THE AERIAL SOCKET

To tune your TV into your VCR you should refer to Manual Programming (page 34). The channel number (usually 36 or 60) is given in the manual of your VCR. The programme selected for your VCR must be 9, 19 or 29. Whenever you wish to use your VCR, you must select the programme assigned to it.

VIA THE EURO-AV SOCKET 1 (AV1)

Refer to your VCR

manual

This is used to connect :

• Satellite receiver or decoder

• a VHS or 8mm video recoder or camcorder (VIDEO) or a S-VHS or Hi-8mm video recorder or camcorder (S-VIDEO)

• a PC or video games console (RGB).

AV 1

Video recorder and/or Decoder and/or Satellite receiver or Camcorder or PC or video  games console

VIA THE EURO-AV SOCKET 2 (AV2)

Video recorder

This is used to connect :

• a VHS or 8mm (VIDEO), S-VHS or Hi-8mm (S-VIDEO) video

recorder.

AV 2

and/or Satellite receiver

If you have two VCRs connected, the decoder must be connected to the VCR connected to the Euro-AV1 socket.

If you have a satellite receiver, refer to the operating manual in order to find out the type of signal delivered then select VIDEO, S-VIDEO or RGB.

You can also connect it to the decoder socket of the second VCR if the latter is fitted with one.

VIA THE AUDIO/VIDEO/S-VIDEO SOCKETS (AV2)

This is used to connect :

• an S-VHS or Hi-8mm video recorder (S-VIDEO)(S and AUDIO sockets).

In order to maintain the optimum sound and picture quality

Ω

S-Video Video Audio

(IN)

(OUT)

of your set, it is recommended not to connect 2 units to the Euro- AV1 socket and the AUDIO/VIDEO/S sockets simultaneously.

AV 2

VIA THE AUDIO/VIDEO/S-VIDEO SOCKETS (AV3)

This is used to connect :

to a camcorder VHS or 8 mm (VIDEO)(VIDEO and AUDIO sockets)

•

S-VHS or Hi 8 mm (S-VIDEO)(S and AUDIO sockets).

VHS

VIDEO L AUDIO R

S-VHS

television set

connections

Your television set selects and

automatically displays in the menu the type

of signal (Video or S-Video) for

the equipment connected.

UNITS CONNECTED

EURO EURO AUDIO/VIDEO/ AUDIO/VIDEO/ AV 1 AV 2 S-VIDEO AV 2 SOCKETS S-VIDEO AV 3 SOCKETS

PAY-TV decoder VIDEO VIDEO

Satellite receiver VIDEO VIDEO

Video recorder VHS/S-VHS VIDEO/S-VIDEO VIDEO/S-VIDEO

Camcorder

PC / Games console Select RGB

Automatic selection Automatic selection

Call AV 1

0/AV

Name

You may give each piece of equipment connected a name. Call up the AV 1, AV 2 or AV 3 menu.

Select the Signal line (yellow key).

Check the type of signal or select as necessary.

Select the Name line. The first dash flashes.

You may enter the name of the channel using 6 characters. Continue to press, the signs, figures and letters are displayed in alphabetical order.

Continue to press : the letters are shown in reverse order. When the required character appears, go to next character.

To leave a space look for the blank character (between ? and A) or press briefly

CALLING UP AUDIOVISUAL PROGRAMMES

a z

z a

0/AV

Signal Video RGB

Name

Signal S-Video RGB

Name

VIDEO/S-VIDEO VIDEO/S-VIDEO Call AV 2 Call AV 3

0/AV

AV 1 AV 2 AV 3

Signal Video RGB

Name

Signal S-Video RGB

Name

Signal Video RGB

Name -

0/AV

Press AV to call AV1, AV2 or AV3 programmes in sequence. In most cases, the television set changes automatically to AV1 or AV2, when the VCR connected is in play back mode. When the VCR is stopped, the TV set returns to the station previously watched.

The TV set changes automatically to 16/9 format if the unit connected supplies the control voltage and if you have selected AUTO from the FORMAT menu.

0/AV

television set

connections

COPYING VIDEO TAPES

It is necessary to have 2 VCRs with the same specifications : 2 VHS/8 mm or 2 S-VHS/Hi-8 mm.

Connect the playback VCR to the Euro-AV1 socket in playback mode. Connect the recording VCR to the Euro-AV2 socket in recording mode.

During the copying of the tape, you can watch the station you are copying.

EQUIPMENT SOCKET PROGRAMME EQUIPMENT SOCKET

VHS

S-VHS

• Direct connection

If preferred, one or two speakers can be connected to replace the loudspeakers on your television set, as shown below :

Video recorder

Camcorder Audio/Video/S-Video AV 3

SPEAKERS CONNECTIONS (OTHER OPTIONS)

CENTRAL SPEAKER

In this case, the speakers must be placed beneath the television set.

PLAY CALL UP RECORD

Video recorder

Euro-AV 1 AV 1

(at the back)

Unit 1

Camcorder Video recorder

Camcorder

Dummy plug to cut the  sound from the second internal loudspeaker (if you plug one speaker only)

Unit 2

Euro-AV 2

Audio/S-Video AV 2 Euro-AV 2 Audio/S-Video AV 2

CONNECTION TO A HI-FI SYSTEM

To boost the audio power, you may connect a Hi-Fi system, if you have one.

You must however avoid connecting your Hi-Fi and speakers to similar outputs (e.g. Hi-Fi on the CINCH surround socket and speakers on the surround clips).

In this case, the configuration of the television set will match that described on page 15.

For a full appreciation of Dolby Surround Pro Logic sound, your television set should be placed in a spacious room.

television set

connections

• Dolby Surround Pro Logic

Surround 

speaker

LR SC

After making the connection, choose configuration 4 from the SPEAKER CONFIGURATION menu, and Dolby from the LOUDSPEAKERS menu.

Then proceed to the adjustment of the audio environment. To do so, call up the BALANCE menu (page 17) and proceed as shown.

You should also adjust the volume of your Hi-Fi.

If you have an amplifier or another Hi-Fi :

LR SC

Surround 

speaker

Hi-Fi

Amplifier

Dummy plug :

Cut the sound 

from the internal 

loudspeaker

After making the connection, choose :

- configuration 4 from the SPEAKER CONFIGURATION menu

- and Dolby from the LOUDSPEAKERS menu. Then proceed to the adjustment of the audio environment. To do so, call up the BALANCE menu (page 17) and proceed as shown.

You should also adjust the volume of your Hi-Fi.

Unit 1 Unit 2

Dummy plug : Cut the sound from the internal loudspeaker

television set

connections

• WIDE STEREO/Dolby 3 Stereo

Hi-Fi

LR SC

After making the connection, choose :

- configuration 2 from the SPEAKER CONFIGURATION menu

- and from the LOUDSPEAKERS menu to obtain wide stereo

- or Dolby to obtain Dolby 3 Stereo sound.

Then proceed to the adjustment of the audio environment. To do so, call up the BALANCE menu (page 17) and proceed as shown.

You should also adjust the volume of your Hi-Fi.

FITTING BATTERIES

Remove the cover at the back of the remote control and insert 2 LR03 (AAA) 1.5 V type batteries.

For a cleaner environment, please dispose of used batteries in the containers provided for this purpose.

television set

teletext

Your television set is equipped to receive teletext. There are 3 types of teletext :

• Teletexte (France-Europe),

• Fastext (UK, Spain),

• Toptext (Germany)

If you notice writing errors (missing letters) on the teletext pages of French networks (L Standards), check :

• That you have good reception

• That On is selected in the Teletext Fine Tuning line of the SET-UP menu (see page 10).

CALLING UP TELETEXT

a z

Select a station on which there is Teletext (for France, TF 1, FR2).

Press once or twice the blue key, the contents page (Page 100) appears.

You may enter the page number required (3 figures). Example: page 170, enter 1, 7, 0 (the number is displayed at the top left of the screen). When the page is found, it appears on the screen. You can move through the pages to select them.

While the teletext is displayed, you may adjust or turn off the volume.

ZOOM

–

PR.- PR.+

To quit Teletext, press .

OPTIONS

See next page.

S100 SKYTEXT 100 Tue 18 Oct 1544:10

0/AV

WHAT'S ON YOUR TV GUIDE......110

TV GUIDE.....110

CABLE........140

RADIO........145

SUSCRIBE.....150

NEWS FLASHES: SPORT 104 FINANCE 239 ON SKYSPORTS: SPORT, FOOTBALL, RACING

HENNESSY GOLD CUP BREAK SkyOne p 365

GUIDE

FAVORITE DISPLAY SUBCODE

GUIDE

FAVORITE DISPLAY SUBCODE

A - Z INDEX ON 199

FINANCE......200

SHARES.......220

LOANS........288

WEATHER......300

110 200

The two menu lines, under the Teletext page, are different, depending on the type of Teletext received (Teletext, Fastext, Toptext) and your selection (see page 33).

GUIDE

You may select different options using the top line of this menu. These are shown in colour. Briefly press the corresponding colour key (red, green, yellow, blue).

The menu bottom line is then activated.

To select options from the bottom line, press the equivalent colour button.

FAVORITE DISPLAY SUBCODE

GUIDE FAVORITE DISPLAY SUBCODE

<<>>100 200 300 400 500 600

GUIDE FAVORITE DISPLAY SUBCODE

HOLD

GUIDE FAVORITE DISPLAY SUBCODE

CLEAR

Subpage No

110 200

ZOOM MIX

- - - -

110 200

ALARM ON

To return to the first line of the menu, press the pink key.

ALARM

If the teletext transmits an alarm page, you can make it come up at a set time. While entering the number of the alarm page (E. G. TVE : 697, ORF : 784). Then enter the digits to choose the time (e.g., for 20.45, type 2, 0, 4, 5) and hold down the last digit until the teletext is removed. At the chosen time, the alarm page will appear on the screen.

To erase the alarm page, first press the blue key then the key .

television set

teletext

When the red and green

rectangles are displayed in these menus, pressing

the red key displays the previous page, pressing

the green key displays te next page.

Key Type Name Functions Menus

MENU Displays Toptext menu (red key).

TOPTEXT

DIRECT Directly displays the priority pages determined by the

PREVIEW Displays TV programme page (red and green keys)

station (red and green keys).

GUIDE Displays subject (yellow key) or field (blue key)

Red

FASTEXT

INDEX Calls up Contents page (red key).

GUIDE Selects different heading (red, green, yellow, blue keys)

INDEX Displays Contents page (red key).

GUIDE You may call :

TELETEXT • The first page of the next ten after the page

SUBPAGES

TOPTEXT Select subpages with red or green keys.

Green

FASTEXT FAVORITE Allows you to store up to 6 of your favourite teletext pages.

TELETEXT

DISPLAY

• The previous page (red key)

• The next page

200

displayed (yellow key)

110

• The first page of the next hundred after the page

displayed (blue key). Eg : page displayed : 135

-> page called up : 140 or 200

Used to display subpages if any. The number of the subpage displayed is underlined.

To store your favourite pages, select one of the 6 locations using either the red or green keys (the selected location will have its 3-digit number underlined). Then enter the number of the required page. Repeat the process for each favourite page. (There are 6 favourite page locations for each PR number).

The colour of the buttons depends on the option

required.

Option selection.

For games :

Briefly press the green key to see a hidden answer.

TOPTEXT To enlarge the text : yellow key

Yellow

FASTEXT

TELETEXT

UPDATE Automatic renewal of the page displayed.

Press once : top half of screen doubled in height. Press twice : bottom half of screen doubled in height. Press three times : return to normal Teletext.

Mix mode :

Briefly press the blue key to overlay the Teletext page on the TV picture.

If you wish to stop page scrolling (eg : 4/7)

Briefly press the red key, the page number replaces «HOLD». Press the red key again to continue scrolling.

Press the yellow key, you can watch your TV programme while waiting for page search to complete.

When the page is found, the message « appears on the screen. Press the blue button to display the page.

PAGE XXX RECEIVED

MENU SUBPAGES DISPLAY SUBCODE

DIRECT

SUBPAGES DISPLAY SUBCODE

Direct page : ÜBERSICHT 2

TV PROG

SUBPAGES DISPLAY SUBCODE

TV INDEX

TV PROG : TV HEUTE

GUIDE

SUBPAGE DISPLAY SUBCODE

INDEX SUBPAGES DISPLAY SUBCODE

GUIDE

SUBPAGES DISPLAY SUBCODE

FIN INDEX

INDEX SUBPAGES DISPLAY SUBCODE

GUIDE

SUBPAGES DISPLAY SUBCODE

GUIDE

SUBPAGES DISPLAY SUBCODE

01 02 03 04 05 06 07 08

GUIDE

FAVORITE DISPLAY SUBCODE

231 240 . . . . . . . . . . . .

GUIDE

SUBPAGES DISPLAY SUBCODE

HOLD ? ZOOM

GUIDE

SUBPAGES DISPLAY SUBCODE

HOLD ? ZOOM

GUIDE

SUBPAGES DISPLAY SUBCODE

HOLD ? ZOOM

GUIDE

SUBPAGES DISPLAY SUBCODE

HOLD ? ZOOM

GUIDE

SUBPAGES DISPLAY SUBCODE

HOLD ? ZOOM

GUIDE SUBPAGES UPDATE SUBCODE

Back to TV until new page received

TOP-Overview

INDEX PA 100

ARD

TV-TIPS

HEADLINES

110

P 100

UEBERSICHT 2 DIE AKTUELLE DOLLARKURS WOCHENSCHAU

TOP - Menu

11:25:49

NACHRICHTEN FINANZ-INFOS SPORT WETTER LOTTO/SPIELE A-Z/ADRESSEN FERNSEHEN TV HEUTE TV-MORGEN

UEBERSICHT 1 UEBERSICHT 2 DIE AKTUELLE

DIRECT retour THEME CHAPITRE

TV-MORGEN

200

MIX

Blue

TOPTEXT SUBCODE Enter the subpage number (eg : 0009).

FASTEXT Press the green key.

TELETEXT The TV picture is displayed and as soon as the subpage is

found, it is displayed.

GUIDE FAVORITE UPDATE SUBCODE

CLEAR

Subpage No

- - - -

ALARM ON

television set

teletext

HOW TO SELECT

Repeatedly press the pink key to select the possible options under the required colour.

Red key : MENU, DIRECT, PREVIEW, GUIDE (Toptext)

INDEX, GUIDE (Teletext or Fastext)

Green key : FAVORITE, SUBPAGE

Yellow key : DISPLAY, UPDATE

Blue key : SUBCODE

Briefly press the same colour key (red, green, yellow or blue) to select.

To save your choice, briefly press the (+) button.

SUBTITLES

Some programmes are transmitted with subtitles for the hard of hearing. These subtitles are received via Teletext on a special page number. They can be superimposed on the screen by selecting that page in Teletext mode. Find the appropriate page number from the Teletext Index page. Enter the number and once the page has been found, you will see the normal TV programme with the subtitles superimposed on it.

To erase the subtitles, press twice the key .

NEWS FLASH

OVERVIEW FAVORITE DISPLAY SUBCODE

OVERVIEW

STORE (+)

GUIDE INDEX

INDEX

HOLD ? ZOOM MIX

CLEAR ALARM ON

TOP-Menu

STORE (+)

GUIDE

TV PROG

DIRECT

FAVORITE DISPLAY SUBCODE

TOP-Menu

FAVORITE DISPLAY SUBCODE

INDEX PAGE 100

STORE (+)

SUBPAGES

FAVORITE DISPLAY SUBCODE

INDEX

FAVORITE DISPLAY SUBCODE

Sous-Pages - - - -

STORE(+)

UPDATE

The latest news can be superimposed on the television picture. Look up the teletext index to find the page number and enter it. Once the page has been found, you can watch the normal television programme. When the lastest news page is updated it will be superimposed on the picture.

The remote control can be used for sound and picture settings again. If you switch to another station, the «Latest news» function is disabled.

If after having seen these news you wish to remove the display from the screen, press the blue key

followed by the key .

television set

TUNING AV1 AV2 AV3

manual programming

You may use this channel adjustment menu if you do not wish to restart

auto programming (where there are only few channels in your area

PROGRAMME

or if a new channel is transmitting).

The following menu is displayed : TUNING is selected

If this is not the case, select the contents line using the yellow key and TUNING with the key .

If the menu is not in English, refer to the INSTALLATION chapter, page 10.

TUNING AV1 AV2 AV3

Norm (-/+) PAL I (UK) Decoder None AV1 AV2 Search Channel CH 22 Cable CC -- Programme 02 Fine Tuning Station name BBC 2 Erase (-) Store (+) Access to the organiser (+)

Norm

Select the Norm (-/+) line (yellow key). Select the broadcasting standard :

PAL/SECAM BG (Euro) : Western Europe (BG) FRANCE LL' : France and Luxembourg (LL’) PAL BG+ : Special standards (Switzerland) SECAM DKK’ : Eastern Europe, Middle Eadt (DKK’) PAL I (UK) : United Kingdom, Ireland (I)

Decoder

This function allows you to access programmes using the PR –/+ keys (zapping). Select Decoder line (yellow key). Select one of the options :

None = no decoder AV1 = Decoder connected to Euro-AV1 socket. AV2 = Decoder connected to Euro-AV2 socket.

Channel/Cable

If you do not know the channel numbers.

Select the Search line (yellow key). Start the search by pressing :

+ : for forward channel search

: for backward channel search. The cursor indicates the part of the range in which it is performing the search. The channel numbers are displayed on

• Channel line when received via an aerial

• Cable line for cable networks.

Once a station has been received, the picture appears on the screen. If the picture, corresponds to the station required, go to the Programme line, otherwise continue the search, with (+).

If you already know the channel numbers.

Select the line

• Channel for TV channels (aerial) or

• Cable for cable networks.

Enter the channel number (it must have 2 digits) e.g. : for channel 6, enter 0 and then 6.

0/AV

TUNING AV1 AV2 AV3

Norm (-/+) PAL I (UK)

Decoder None AV1 AV2 Search Channel CH 22 Cable CC -- Programme 02 Fine Tuning Station name BBC 2 Erase (-) Store (+) Access to the organiser (+)

Norm (-/+) PAL I (UK)

Decoder

Search Channel CH 22 Cable CC -- Programme 02 Fine Tuning Station name BBC 2 Erase (-) Store (+) Access to the organiser (+)

None AV1 AV2

TUNING AV1 AV2 AV3

Norm (-/+) PAL I (UK) Decoder None AV1 AV2

 Channel CH 22 Cable CC -- Programme 02 Fine Tuning Station name BBC 2 Erase (-) Store (+) Access to the organiser (+)

TUNING AV1 AV2 AV3

Norm (-/+) PAL I (UK) Decoder None AV1 AV2 Search

Channel CH 22

Cable CC --

Programme 02 Fine Tuning Station name BBC 2 Erase (-) Store (+) Access to the organiser (+)



television set

manual programming

Programme

Select the Programme line (yellow key).

Enter the station number.

Programme 1 to 9 : Press the corresponding digit briefly (eg: 03, press 3).

Programme 10 to 99 (eg : 52) : Briefly press 5 to display the tens : 5 -

Briefly press 2 to display the units : 5 2

To be used if the picture is not clear or for searching for

Fine Tuning

a specific source, for example, a video recorder channel

Select Fine Tuning line (yellow key). + : sharper picture contours or search higher in the range

: softer picture contours or search lower in the range.

Station name

Select the Station name line (yellow key). The station name can be written in 6 characters.

Hold down the button : the characters are displayed in ascending order. Hold down the button : the characters are displayed in the

descending order. When the required character appears, press these buttons to go

the next or previous character.

To leave a space look for the blank character (between ? and A) or press briefly

Store / Erase

Press yellow key to select Erase (-) Store (+) line. Briefly press, your channel is stored in the memory.

If you wish to Erase, press

Continue the search for a different station. Search and store all the stations by repeating the above procedure starting from Search, Channel or Cable. Repeat the process for the next programme/station starting from NORM.

Access to the organiser

When all the channels or the new channel have been retrieved, you can access the channels management menu. Select the line Access to the organiser (yellow key)

The menu Programme Organiser appears. Proceed as explained on page 8 to list the channels in the order required by you and to give them a name if this has not already been done.

To return to the TUNING menu press once on the key .

To clear the menus press twice on the key .

z a

Optional :

a z

z a

0/AV

TUNING AV1 AV2 AV3

Norm (-/+) PAL I (UK) Decoder None AV1 AV2 Search Channel CH 22 Cable CC --

Programme 02

Fine Tuning Station name BBC 2 Erase (-) Store (+) Access to the organiser (+)

Search Channel CH 22 Cable CC -- Programme 02

Fine Tuning

Station name BBC 2 Erase (-) Store (+) Access to the organiser (+)



TUNING AV1 AV2 AV3

Norm (-/+) PAL I (UK) Decoder None AV1 AV2 Search Channel CH 22 Cable CC -- Programme 02 Fine Tuning

Station name BBC 2

Erase (-) Store (+) Access to the organiser (+)



TUNING AV1 AV2 AV3

Norm (-/+) PAL I (UK) Decoder None AV1 AV2 Search Channel CH 22 Cable CC -- Programme 02 Fine Tuning Station name BBC 2

Erase (-) Store (+)

Access to the organiser (+)

Programme Organiser

01 BBC 1

02 BBC 2 03 04  05 06 07 08 09

PR+, PR- Select a station +, -, 0..9 Move this programme Blue Change the name Yellow Erase this station To exit, press the (TV) key

Nous vous recommandons de découper cette vignette pour qu’un enfant ne puisse pas en prendre connaissance.

SI VOUS NE VOUS SOUVENEZ PLUS DE VOTRE CODE PERSONNEL

Appuyez sur la touche jaune pour sélectionner le ligne Sommaire du menu, puis sur la touche (+) pour sélectionner VERROUILLAGE.

Appuyer sur la touche jaune pour sélectionner la ligne Entrer votre numéro de code. Appuyez simultanément sur les touches et du téléviseur.

L’ancien code se trouve alors effacé et vous pouvez en entrer un nouveau. Après le changement de code, il n’est pas nécessaire de reverrouiller les programmes qui étaient verrouillés.

PR +

Wir empfehlen Ihnen, diesen Abschnitt auszuschneiden, damit er nicht von Kindern gelesen werden kann.

WENN SIE SICH NICHT MEHR AN IHRE PIN-NR ERINNERN

Kurzes Drücken der gelben Taste, die Titelzeile des Menüs wird aufgerufen, anschließend mit der Taste (+) SPERRUNG wählen.

Drücken Sie die gelbe Taste, die Zeile Geben Sie Ihre PIN-Nr ein wird aufgerufen. Drücken Sie gleichzeitig die entsprechende Taste und am Fernsehgerät.

Die frühere PIN-Nr ist nun gelöscht und Sie können einen neuen Code eingeben. Nach dem Ändern der PIN-Nummer brauchen die vorher gesperrten Programme nicht nochmals gesperrt werden.

PR +

Vi consigliamo di staccare questo tagliando per evitare che i bambini ne prendano conoscenza.

✄

SE NON RICORDATE PIÚ IL CODICE SEGRETO

Premere il tasto giallo per selezionare le riga Sommario del menu, poi il tasto (+) per selezionare BLOCCO PROG.

Premere il tasto giallo per selezionare la riga Inserire il codice segreto. Premere simultaneamente i tasti e del televisore.

Il codice precedente viene cancellato e potete quindi inserire un nuovo codice segreto. Dopo aver cambiato il codice, non è necessario di ribloccare i programmi che erano bloccati.

PR +

Recomendamos cortar este cupón para que los niños no tengan acceso al mismo.

SI SE OLVIDO EL CÓDIGO PERSONAL

Pulse la tecla amarilla para seleccionar la línea Índice del menú, luego la tecla (+) para seleccionar BLOQUEO.

Pulse la tecla amarilla para seleccionar la línea Introducir el número del código. Pulsar simultáneamente las teclas y del televisor.

El código antiguo se borra, pudiendose introducir otro nuevo. Después de un cambio de código, no es necesario volver a proteger los programas que ya estaban protegidos.

PR +

We recommend you cut out this sticker to keep it hidden from the children.

IF YOU NO LONGER REMEMBER YOUR PERSONAL CODE

Press the yellow button to select the menu Contents line, then the (+) button to select LOCK.

Press the yellow button to select the line Enter your PIN number. Press simultaneously the and buttons on the TV.

The old code is then erased and you may enter a new one. After changing code, it is not necessary to relock the programs which were already locked.

PR +

✄

Technicolor - Thomson 28VT68ND, 32VT68ND User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

safety precautions

contents

connections and commands

ON THE FRONT SIDE

auto-programming

AUTO - PROGRAMMING

Programme Organiser

To delete a programme

New channels

installation

SET-UP

Maximum Volume Limitation

Menu language

Programme number display

Time reference

Teletext Fine Tuning

Magnetic field correction

PREFERENCES

picture adjustments

PICTURE

Digital Mastering

PIP (Picture in picture)

Image inlay (PIP)

Inlaid image position

Picture swap

Scanning all inlaid image programmes

Mosaic

FORMAT

Subtitles Zoom

sound adjustments

CONNECTING THE SPEAKERS

SPEAKER CONFIGURATION

LOUDSPEAKERS

Effect

BALANCE

BALANCE THE ACOUSTIC ENVIRONMENT

TONE ADJUSTMENT

HEADPHONES

day to day operation

SWITCHING ON / SELECTING PROGRAMMES

BROWSE

Volume

Sound mute

RETURN TO PREFERRED SETTINGS

DISPLAY / ZAPPING

PICTURE FREEZE

LAST PROGRAMME VIEWED

ZOOM

STAND-BY

AUTOMATIC STOP

CLOCK

other functions - extras

Sleep-timer

Clock (automatic on)

CHILD LOCK

LOCK

Enter your PIN number

Access the programme list

ACCESS TO THE STATION TUNING MENUS

connections

VIDEO RECORDER CONNECTIONS

VIA THE AERIAL SOCKET

VIA THE EURO-AV SOCKET 1 (AV1)

VIA THE EURO-AV SOCKET 2 (AV2)

VIA THE AUDIO/VIDEO/S-VIDEO SOCKETS (AV3)

UNITS CONNECTED

Name

CALLING UP AUDIOVISUAL PROGRAMMES

COPYING VIDEO TAPES

SPEAKERS CONNECTIONS (OTHER OPTIONS)

CENTRAL SPEAKER

CONNECTION TO A HI-FI SYSTEM

FITTING BATTERIES

teletext

CALLING UP TELETEXT

OPTIONS