Technicolor Delivery Technologies Belgium TG582NV2HP Users Manual

MediaAccess TG582n v2 for Telmex

Wireless n Multi-User ADSL2+
Gateway

TELECOM

DATA

VIDEO

High-Performance Router

The Technicolor TG582n v2 is a high-performance ADSL2+ router,
supporting G.INP (“Impulse Noise Protection”). G.INP makes sure that no
errors occur on the DSL connection, even under extreme conditions, so that
high-quality video transmission is guaranteed at all times. It is based on the
principle of retransmission.

An integrated IEEE802.11n 2.4GHz (2x2) wireless access point guarantees
speed and stability, while the integrated 10/100Mbps four-port switch oers
seamless connection of wired and wireless devices from anywhere in the
home.

“I speak Qeo”

The TG582n v2 has been developed to run Qeo, Technicolor’s open, agile
and distributed software framework that addresses the issue of disparate
ecosystems used for device interaction. With Qeo, you can seamlessly bridge
all your connected devices, applications and over-the-top cloud solutions,
regardless of brand or ecosystem. As a universal software language, it lets
you create totally new use cases for the connected life and the “Internet of
Things” (IoT).

Qeo also includes tools to monitor and manage all Qeo enabled devices,
helping you keep operational costs under control.

Features at a Glance

■ Integrated ADSL2+ modem

■ 4 FE LAN ports

■ Wireless networking on board: 802.11n 2x2 (2.4 GHz) with

High Power (up to 250mW)

■ Future-proof full service platform

■ Extensive remote management

■ Non-service-aecting platform software upgrades

■ IPv6 enabled

■ Designed to meet the latest ECO standards

To learn more about Qeo, visit: www.i-speak-qeo.com

MediaAccess TG582n v2 for Telmex

Wireless n Multi-User ADSL2+
Gateway

Easy to Use

The TG582n v2 is easy to use through simple ‘plug and play’ and easy to
install with the Technicolor Gateway Setup wizard, making the setup of a
wireless home network as eortless as clicking a button.

The Technicolor Gateway Setup wizard performs comprehensive system
checks before and during the installation and setup process, and validates
all user inputs to guarantee the end user a secured wireless connection to
the Internet.

With Wi-Fi Protected Setup (WPS) users can easily connect with the
TG582n v2 wireless network by simply pushing a button or entering a PIN
code. It allows home users to easily connect to a secure network without any
complex configuration and eliminates the need to remember or store their
security information in an unsafe way.

Highest Security

The Technicolor firewall guarantees users the ultimate network security level.
Through integration with NAT, the firewall leverages all the Application
Level Gateways (ALGs) provided in the NAT context to minimize
undesired service impacts. The firewall provides Stateful Packet Inspection
(SPI), and an integrated Intrusion Detection and Prevention System (IDS)
engine monitors a wide range of attack patterns, and logs potential security
breaches to a local cache or remote server.

The TG582n v2 also supports powerful wireless security mechanisms, such
as Wi-Fi Protected Access (WPA2) together with a secure and user-friendly
connection and configuration mechanism for wireless clients (WPS).

The support of multiple SSIDs in the gateway enables support for up to four
independent wireless access networks. These additional wireless networks
allow other wireless users to enjoy the high-performance access without
compromising the integrity of the basic network, thus keeping the original
network access limited and secure.

IPv6 Enabled

With the approaching IPv4 address pool depletion, our products need to
be ready for IPv6. Technicolor is a frontrunner in the introduction of IPv6
on its devices, with the TG582n v2 being enabled for multiple IPv6 field
scenarios. Internet Protocol version 6 is the next generation of Internet
technologies aiming to eectively support the ever-expanding Internet
usage and functionality, and also to address security concerns that exist in
an IPv4 environment.

Technicolor aims to introduce IPv6 as smoothly as possible in customer
networks. By providing in-depth knowledge of the networking stack, we
guide our customers in their transition from IPv4 to IPv6.

Easy to Manage

The TG582n v2 is completely designed according to the TR-069 data
model through which the device can be configured remotely by the operator
without interrupting the end user’s experience. In addition, the Device:2 data
model is available to increase remote management capabilities such as life
cycle management, diagnostics and applications.

ECO

Technicolor is committed to oers its customers sustainable products and
implements a set of ECO features to reach the best possible environmental
performance. In addition to carefully selected plastics and packaging
to minimize the ecological footprint, the TG582n v2 benefits from a
unique combination of hardware and software features that reduce power
consumption substantially.

Professional Services

To reinforce our extensive portfolio of digital home solutions, Technicolor has
a dedicated Professional Services team to make sure that every deployment
is a success, from initial provisioning and integration to operations, upgrades,
ongoing support and beyond.

Our wide array of services spans the entire customer project lifecycle,
encompassing:

■ Expert consulting

■ Seamless system integration

■ Warranty on all our products

■ Qualified technical support and maintenance

■ Ecient repair, refurbishment and recycling

MediaAccess TG582n v2 for Telmex

Wireless n Multi-User ADSL2+
Gateway

Technical Specifications

Hardware Specifications

■ Interfaces WAN RJ-11 DSL line port for ADSL/POTS

or ADSL/ISDN

■ Interfaces LAN 4-port autosensing 10/100 Base-T

auto-MDI/MDI-X Ethernet LAN switch
Wi-Fi IEEE 802.11n 2.4GHz 2x2 on board (High Power)

■ Extras Power button

Wi-Fi button
WPS button
Reset button

■ Dimensions 160 x 126 x 25 mm (6.3 x 4.9 x 1 in.)

■ Temperature 0°-40°C (32°-105°F)

■ Humidity 20% to 80%

■ AC Voltage 100-240VAC (switched mode power supply)

DSL Modem Specifications

■ Supports multi mode standards

■ ADSL compliance: ANSI T1.413 Issue 2,

ITU-T G.992.1 Annex A, B (G.dmt),
ITU-T G.992.2 Annex A, B (G.lite),
ITU-T G.994.1 (G.hs)
Maximum rate: 8Mbps for downstream
and 1Mbps for upstream

■ ADSL2 compliance: ITU-T G.992.3 Annex A, B, L, M

(G.dmt.bis),
ITU-T G.992.4 Annex A, B, L, M
(G.lite.bis)
Maximum rate: 12 Mbps for downstream
and 1.5 Mbps for upstream
ITU-T G.998.4 (G.inp)

■ ADSL2+ compliance: ITU-T G.992.5 Annex A, B

Maximum rate: 24 Mbps for downstream
and 2.5 Mbps for upstream
ITU-T G.998.4 (G.inp)

■ No Dying Gasp

Wireless Specifications

■ Wi-Fi access point, Wi-Fi Certified®

IEEE802.11n 2.4GHz 2x2 AP

■ Wi-Fi power High Power: Up to 24dBm (250mW EIRP)

■ WPA2™-Personal / WPA™-Personal / WEP™

■ Wi-Fi Multimedia (WMM®)

■ Wi-Fi Protected Setup (WPS™)

■ Up to 4 BSSIDs (virtual AP) support

■ Security and service segregation per SSID

■ Dynamic rates switching for optimal wireless rates

■ RX/TX switched diversity

■ 2x2 streams

■ Manual/auto radio channel selection

Services

■ URL- and (optional) content-based website filtering

■ Open architecture for 3rd party application and UI development

Management

■ User-friendly GUI via HTTP and HTTPS

■ Unified management interface (MBus)

■ Web services API for remote access

(portal, management, diagnostics, applications, ...)

■ GUI-embedded Easy Setup wizard

■ On-demand remote GUI assistance (helpdesk)

■ Web-browsing Intercept (install / diagnostics / captive portal)

■ Technicolor Gateway Setup wizard

■ TR-069 CPE WAN Management Protocol

TR-098 Internet Gateway Device Management
TR-143 network throughput performance tests and
statistical monitoring
TR-181i2 Device:2 data model
TR-157a3 Life Cycle Management (LCM)
TR-111 home network device management

■ TR-064 LAN side configuration

■ Zero-touch autoprovisioning

Security

■ Stateful Packet Inspection Firewall (SPIF)

■ Customizable firewall security levels

■ Intrusion detection and prevention (DoS, SYN Flood, Ping of Death, Fraggle,

LAND, Teardrop, etc.)

■ DeMilitarized Zone (DMZ)

■ Multi-level access policy

■ “SIM-lock” provider locking

MediaAccess TG582n v2 for Telmex

Wireless n Multi-User ADSL2+
Gateway

Technical Specifications

Networking

■ Symmetrical NAT with application helpers (ALGs)

■ Game and application sharing NAT port maps

■ DHCP conditional serving & relay, DNS server & relay

■ IGMPv3 proxy (Fastleave)

■ IGMP snooping (full routed)

■ DHCP spoofing

■ Flexiport (automatic selection of Ethernet port bridged IPTV)

■ IEEE802.1q VLAN bridging, multiple bridge instances

IPv6 Networking

■ IPv4 / IPv6 dual IP stack

■ Supported models PPP(oE) – IPoE

■ Transitioning 6rd/6to4/6in4

DSLite

■ Stateful connection tracking / stateful inspection firewall

■ DHCPv6 Stateful/stateless DHCPv6 client

Stateless DHCPV6 server
Relay
Prefix Delegation

■ DNS v4/v6 Proxy

■ ULA

■ ICMPv6

■ IPv6 Quality of Service

■ MLDv1/v2

Environmental Features

■ ECO mode for more intelligent power saving

■ Wi-Fi ON/OF button

■ ECO LEDs

Content of the Box

■ Wireless n Multi-User ADSL2+ Gateway

■ Power adapter

■ Ethernet (RJ-45) and telephone (RJ-11) cable

■ Setup CD and leaflet(s) (optional)

■ Filter(s) or splitter(s) (optional)

TECHNICOLOR WORLDWIDE HEADQUARTERS

1, rue Jeanne d’Arc
92443 Issy-les-Moulineaux France
Tel. : [phone] - Fax : [phone]

www.technicolor.com

SALES CONTACT

For more information please get in touch with your
usual sales representative or use the following email:

[e-mail]

[e-mail]

[e-mail]

[e-mail]

© Copyright 2013 Technicolor. All rights reserved.
Photos and specifications are subject to change without
notice. All trade names referenced are service marks,
trademarks, or registered trademarks of their respective
companies.
DMS-DAT-20130122-0001 vA.2

EN

FR

DE

ES

PT

IT

SV

NL

Safety Instructions and Regulatory Notices 2

Read this document prior to installation!

Consignes de Sécurité et Informations Réglementaires 9

Lisez ce document avant d’effectuer l’installation!

Sicherheitshinweise und Zulassungsbestimmungen 15

Liest dieses Dokument vor Installation!

Instrucciones de Seguridad e Información Sobre Regulaciones 21

Lea este documento antes de proceder a la instalación!

Instruções de Segurança e Informações Sobre Normas 27

Leia este documento antes de iniciar a instalaçio!

Precauzioni di Sicurezza e Informazioni Sulla Normativa 33

Legger questo documento prima di eseguire l’ instalaçao!

Säkerhetsföreskrifter och -Information 38

Läs säkerhetsföreskrifterna noggrat!

Veiligheidsvoorschriften en Regelgevingsinformatie 43

Gelieve dit document te lezen alvorens te starten met installatie!

SAFETY INSTRUCTIONS AND REGULATORY NOTICES

!

BEFORE YOU START INSTALLATION OR USE OF THIS PRODUCT, CAREFULLY READ THESE
INSTRUCTIONS

When using this product, always follow the basic safety precautions to reduce the risk of fire, electric shock and
injury to persons, including the following:

 Always install the product as described in the documentation that is included with your product.
 Avoid using this product during an electrical storm. There may be a remote risk of electric shock from

lightning.

 Do not use this product to report a gas leak in the vicinity of the leak.

Wireless

In case this product is equipped with a wireless transceiver, it uses Direct Sequence Spread Spectrum (DSSS) /
Orthogonal Frequency Division Modulation (OFDM) radio technology. As such it is designed to be inter-operable with
any other wireless DSSS/OFDM type product that:

 Complies with the IEEE802.11b/IEEE802.11g/IEEE802.11n Standard on Wireless LANs, as defined and approved

by the Institute of Electrical and Electronics Engineers.

 Is Wi-Fi® CERTIFIED™ as defined by the Wi-Fi® Alliance.

Directive

Unless express and prior approval by Technicolor in writing, you may not:

 Disassemble, de-compile, reverse engineer, trace or otherwise analyse the equipment, its content, operation, or

functionality,
or otherwise attempt to derive source code (or the underlying ideas, algorithms, structure or organization) from the
equipment,
or from any other information provided by Technicolor, except to the extent that this restriction is expressly

prohibited by local law;

 Copy, rent, loan, re-sell, sub-license, or otherwise transfer or distribute the equipment to others;
 Modify, adapt or create a derivative work of the equipment;
 Remove from any copies of the equipment any product identification, copyright or other notices;
 Disseminate performance information or analysis (including, without limitation, benchmarks) from any source

relating to the equipment.
Such acts not expressly approved by Technicolor will result in the loss of product warranty and may invalidate the user's
authority to operate this equipment in accordance with FCC Rules.
Technicolor disclaims all responsibility in the event of use that does not comply with the present instructions.

2

Environmental information

WEEE directive

This symbol means that your inoperative electronic appliance must be collected separately and not mixed
with the household waste.The European Union has implemented a specific collection and recycling system for
which producers are responsible.

This appliance has been designed and manufactured with high quality materials and components that can be
recycled and reused.

Electrical and electronic appliances are liable to contain parts that are necessary in order for the system to
work properly but which can become a health and environmental hazard if they are not handled or disposed of
in the proper way. Consequently, please do not throw out your inoperative appliance with the household
waste.

If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave it
with the vendor when buying a new appliance.

 If you are a professional user, please follow your supplier's instructions.
 If the appliance is rented to you or left in your care, please contact your service provider.

Energy consumption

Energy savings - You have a role to play...
Learn how you can use and explore ways for using your electronic equipment.

The notice detailed useful information on all the features of your product but also on energy consumption.
We strongly encourage you to carefully read the notice before putting your equipment in service to get the

best service it can offer you.

By working together, we can reduce the impact we have on the earth!

Safety Instructions

Climatic conditions

This product:

 Is intended for in-house stationary desktop use; the maximum ambient temperature may not exceed 40°C (104°F).
 Must not be mounted in a location exposed to direct or excessive solar and/or heat radiation.
 Must not be exposed to heat trap conditions and must not be subjected to water or condensation.
 Must be installed in a Pollution Degree 2 environment (Environment where there is no pollution or only dry,

nonconductive pollution).

Cleaning

Unplug this product from the wall socket and computer before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.

3

Water and moisture

!

!

Do not use this product near water, for example near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement
or near a swimming pool. Transition of the product from a cold environment to a hot one may cause condensation on
some of its internal parts. Allow it to dry by itself before re-starting the product.

Interface classifications

The external interfaces on the rear panel of the product are classified as follows:

 DSL, ADSL, SHDSL, VDSL, Line: TNV circuit, subjected to over voltages (TNV-3)
 ISDN: SELV circuit
 PSTN, FXO: TNV circuit, subjected to over voltages (TNV-3)
 Phone, VoIP, FXS: TNV circuit, not subjected to over voltages (TNV-2)
 All other interface ports (e.g. Ethernet, 10/100Base-T/ MDI(-X), USB, Console, Craft, etc.), including the low

voltage power input from the AC mains power supply: SELV circuits.

WARN ING

 The Phone, VoIP, FXS port will be classified as a TNV-3 circuit when connected internally to the PSTN,

FXO port, for example, when the device is powered off.

 If the product is equipped with a USB interface (slave and/or master) or any type of connector with

metallic shielding, then it is not allowed to connect the Phone, VoIP, FXS port with the PSTN, FXO or the
DSL, ADSL, SHDSL, VDSL, Line port by any means, for example with an external telephone cable.

Electrical powering

The powering of the product must adhere to the power specifications indicated on the marking labels.
The power supply must be Class II and a Limited Power Source in accordance with the requirements of IEC60950-1/
EN60950-1, Clause 2.5 and rated as indicated on the label on your product. It must be tested and approved to national

or local standards.
For US and Canada: This product is intended to be supplied by a Listed Direct Plug-in, or Desktop Power Unit marked

"Class 2" and rated as indicated on the label on your product.
The use of other types of supplies is prohibited. If you are not sure of the type of power supply needed, consult the
product's user documentation or contact your local product dealer.

ISDN

WARN ING
For US and Canada: Do not use the ISDN port; do not attempt to connect this port to the network at anytime.

USB

The device is to be connected to an identified USB port complying with the requirements of a Limited Power Source.

4

Telephone cable

!

CAUTION

To reduce the risk of fire, use only No 26 AWG wire size or larger telecommunication line cord.

Connect the telecommunication line cord only in the PSTN, FXO, DSL, ADSL, SHDSL, VDSL or Line port of the
product. Never plug the telecommunication line cord in another receptacle of the product.
Follow the installation instructions in the sequence as outlined in the installation guide.

Central splitter / distributed filter(s) (if applicable)

If telephone service is required on the same line, a central splitter or distributed filter(s) must be installed for optimal
DSL performance.

Depending on your DSL configuration and type of splitter / filters, installation must be carried out by qualified service
personnel. Consult your telephone service company or DSL service provider for instructions.

Accessibility

The Direct Plug-in power supply, or the plug on the power supply cord serves as disconnect device. Be sure that the
power socket outlet you plug the power supply into is easily accessible and located as close to the equipment as
possible.

Overloading

Do not overload mains supply socket outlets and extension cords as this increases the risk of fire or electric shock.

Servicing

To reduce the risk of electric shock, do not disassemble this product. None of its internal parts are user-replaceable;
therefore, there is no reason to access the interior. Opening or removing covers may expose you to dangerous voltages.
Incorrect reassembly could cause electric shock if the appliance is subsequently used.
If service or repair work is required, take it to a qualified service dealer.

Damage requiring service

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following
conditions:

 When the power supply or its plug are damaged.
 When the attached cords are damaged or frayed.
 If liquid has been spilled into the product.
 If the product has been exposed to rain or water.
 If the product does not operate normally.
 If the product has been dropped or damaged in any way.
 There are noticeable signs of overheating.
 If the product exhibits a distinct change in performance.

5

Immediately disconnect the product if you notice it giving off a smell of burning or smoke. Under no circumstances

!

must you open the equipment yourself; you run the risk of electrocution.

Regulatory Information

You must install and use this device in strict accordance with the manufacturer's instructions as described in the user
documentation that is included with your product.

Before you start installation or use of this product, carefully read the contents of this document for device specific
constraints or rules that may apply in the country where you want to use this product.

In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or
responsible representatives of the organization.

If you are uncertain of the policy that applies on the use of wireless equipment in a specific organization or environment
(e.g. airports), you are encouraged to ask for authorization to use this device prior to turning on the equipment.
Technicolor is not responsible for any radio or television interference caused by unauthorized modification of the device,
or the substitution or attachment of connecting cables and equipment other than specified by Technicolor. The
correction of interference caused by such unauthorized modification, substitution or attachment will be the
responsibility of the user.
Technicolor and its authorized resellers or distributors are not liable for any damage or violation of government
regulations that may arise from failing to comply with these guidelines.

Europe - European Union

European Community Declaration of Conformity

This equipment can be used in all countries that are member of the European Union and that are member of the
European Free Trade Association.

The Declaration of Conformity can be found on www.technicolor.com
In case this product is equipped with a wireless transceiver:

 it is restricted to indoor use only.
 it complies with the basic restrictions and limits as defined in the European Council Recommendation (1999/519/

This product complies with:

 Commission Regulation (EC) No 1275/2008 implementing Directive 2005/32/EC: Ecodesign requirements for

 Commission Regulation (EC) 278/2009: Ecodesign requirements for no-load condition electric power

Hereby, Technicolor, declares that this product is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/ EC of the European Parliament and of the Council.

.

EC) on the limitation of exposure of the general public to Electromagnetic fields.

standby and off mode electric power consumption of electrical and electronic household and office equipment.

consumption and average active efficiency of external power supplies.

6

North-America - Canada

!

Notification of Canadian Radio Frequency Interference Statement

This Class B digital apparatus complies with Canadian ICES-003.

NOTICE: This product meets the applicable Industry Canada technical specifications.
NOTICE: The ringer Equivalence Number (REN) for this terminal equipment is 0.1. The REN is an indication of the

maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does
not exceed five.

Canada - Industry Canada (IC)

In case this product is equipped with an IEEE802.11b/IEEE802.11g/IEEE802.11n wireless transceiver, complying with
RSS 210 and/or RSS 213 of Industry Canada, operation is subject to the following two conditions:

1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired operation

of the device.

IMPORTANT NOTE: Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20 cm (8 inches) between the radiator and
your body.

Restricted Frequency Band

In case this product is equipped with an IEEE802.11b/IEEE802.11g/IEEE802.11n wireless transceiver, it only uses
channels 1 to 11 (2412 to 2462 MHz) on Canada territory.

North-America - United States of America

Federal Communications Commission (FCC) Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

7

 Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause undesired

operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.

Responsible Party: Technicolor, 101W. 103rd St., Indianapolis, IN 46290 USA, 888-898-4377.
This equipment complies with Part 68 of the FCC Rules.
The customer information required for Telephone Terminal Equipment ("TTE") approved for connection to the Public
Switched Telephone Network ("PSTN"), pursuant to 47 CFR §68.218(b)(1) can be found at www.technicolor.com

.

RF-Exposure Statement

When the product is equipped with a wireless interface, then it becomes a mobile or fixed mounted modular transmitter
and must have a separation distance of at least 20 cm (8 inches) between the antenna and the body of the user or
nearby persons. In practice, this means that the user or nearby persons must have a distance of at least 20 cm (8 inches)
from the modem and must not lean on the modem in case it is wall-mounted.

With a separation distance of 20 cm (8 inches) or more, the M(aximum) P(ermissible) E(xposure) limits are well above
the potential this module is capable to produce.

The transmitter shall not be collocated with other transmitters or antennas.

Restricted Frequency Band

In case this product is equipped with an IEEE802.11b/IEEE802.11g/IEEE802.11n wireless transceiver, it may only use
channels 1 to 11 (2412 to 2462 MHz) on U.S.A. territory.

8

CONSIGNES DE SÉCURITÉ ET INFORMATIONS RÉGLEMENTAIRES

!

AVANT D’INSTALLER OU D’UTILISER LE PRODUIT, LISEZ ATTENTIVEMENT CES INSTRUCTIONS

Afin d’éviter tout risque d’incendie, de choc électrique et de blessure corporelle, il convient d’utiliser le produit
conformément aux mesures de sécurité de base, parmi lesquelles les suivantes:

 Respectez toujours les instructions d’installation détaillées dans la documentation accompagnant le

produit.

 Évitez de connecter ou d'utiliser ce produit en cas d'orage.La foudre peut provoquer un faible risque de

choc électrique.

 N’utilisez pas le produit pour signaler une fuite de gaz à proximité de cette fuite.

Réseau sans fil

Si le produit est équipé d'un émetteur-récepteur sans fil IEEE802.11b/IEEE802.11g/IEEE802.11n, il utilise la technologie
radio DSSS (Modulation du spectre à séquence directe) / OFDM (Multiplexage par répartition orthogonale de la
fréquence). En tant que tel, il est étudié pour fonctionner sans problèmes avec n’importe quel autre produit sans fils
supportant la norme DSSS/OFDM qui:

 est conforme à la norme IEEE 802.11b/IEEE802.11g/IEEE802.11n relative aux réseaux locaux sans fil, telle que

définie et approuvée par l’IEEE (Institute of Electrical and Electronics Engineers).

 est certifié Wi-Fi® CERTIFIED™ par l’Alliance Wi-Fi®.

Consignes à respecter

Sauf accord écrit explicite et préalable de Technicolor, vous ne pouvez pas:

 démonter, décompiler, décomposer, examiner ou analyser de quelque manière que ce soit l'appareil, son contenu,

son fonctionnement ou ses fonctionnalités,

ni tenter de copier le code source (ou les concepts sous-jacents, les algorithmes, la structure ou l'organisation) de

l'appareil,

ou de toute autre information fournie par Technicolor, sauf si cette restriction est expressément interdite par la

législation locale;

 copier, louer, prêter, revendre, mettre sous licence, ni transférer ou distribuer l'appareil à des tiers;
 modifier, adapter ou créer un dérivé de l'appareil;
 retirer de l'appareil l'identification du produit, les droits d'auteur ou toute autre notification;
 diffuser des informations ou analyses relatives aux performances de l'appareil (y compris et sans restriction, les tests

de performance) quelle que soit la source d'information.
Ces actes, réalisés sans l'accord explicite de Technicolor, entraînent la perte de la garantie du produit et enlèvent à

l'utilisateur le droit d'employer l'équipement.
Technicolor rejette toute responsabilité en cas d'utilisation de l'équipement non conforme aux présentes instructions.

9

Environnement

Directive DEEE (WEEE)

Ce symbole signifie que votre appareil électronique hors d'usage doit être collecté séparément et non jeté
avec les déchets ménagers. Dans ce but, l'Union Européenne a institué un système de collecte et de recyclage
spécifique dont les producteurs ont la responsabilité.

Cet appareil a été conçu et fabriqué avec des matériaux et des composants de haute qualité pouvant être
recyclés et réutilisés.

Les appareils électriques et électroniques sont susceptibles de contenir des éléments qui, bien
qu'indispensables au bon fonctionnement du système, peuvent s'avérer dangereux pour la santé et
l'environnement s'ils sont manipulés ou éliminés de manière incorrecte. Par conséquent, veuillez ne pas jeter
votre appareil usagé avec les ordures ménagères.

Si vous êtes propriétaire de l'appareil, vous devez le déposer au point de collecte local approprié ou le
remettre à votre vendeur contre l'achat d'un produit neuf.

 Si vous êtes un utilisateur professionnel, référez vous aux instructions de votre fournisseur.
 Si l'appareil vous est loué ou remis en dépôt, contactez votre fournisseur de service.

Consommation d'énergie

Économies d'énergie – Vous avez un rôle à jouer...
Découvrez comment utiliser votre appareil électronique.

Le mode d'emploi contient des informations utiles sur les différentes fonctionnalités du produit ainsi que sur la
consommation d'énergie.

Nous vous recommandons de lire attentivement le mode d'emploi avant de mettre l'appareil en service afin
de tirer le meilleur parti de ses fonctionnalités.

Ensemble, nous pouvons réduire l'impact de nos activités sur la planète.

Consignes de sécurité

Conditions climatiques

Ce produit:

 est conçu pour une utilisation fixe dans un bureau à une température ambiante maximale de 40°C (104°F).
 ne doit pas être installé dans un endroit exposé au rayonnement direct et excessif du soleil et/ou à des radiations de

chaleur.

 ne doit pas être mis dans des conditions d'accumulation de chaleur et ne doit pas être soumis à l'humidité ou la

condensation.

 doit être installé dans un environnement présentant un degré de pollution 2 (environnement exempt de pollution

ou avec une pollution sèche, non conductrice).

10

Nettoyage

!

Débranchez l'appareil de la prise murale et de l'ordinateur avant de le nettoyer. N'utilisez pas de détergents liquides ou
d'aérosols. Nettoyez-le avec un chiffon humide.

Eau et humidité

N'utilisez pas ce produit à proximité d'une arrivée d'eau, par exemple près d'une baignoire, d'un lavabo, d'un évier,
d'une machine à laver, dans un sous-sol humide ou près d'une piscine. Le transfert de ce produit d'un environnement
froid vers un environnement chaud peut entraîner l'apparition de condensation sur certaines parties internes. Laissez
l'appareil sécher avant de le remettre en marche.

Classification des interfaces

Les interfaces externes situées sur le panneau arrière du produit sont spécifiées comme suit:

 DSL, ADSL, SHDSL, VDSL, Line: circuit TRT, sujet à des surtensions (TRT-3)
 ISDN: circuit TBTS
 PSTN, FXO: circuit TRT, sujet à des surtensions (TRT-3)
 Phone, VoIP, FXS: circuit TRT, non sujet à des surtensions (TRT-2)

AVERTISSEMENT

 Le port Phone, VoIP, FXS sera classifié comme un circuit TRT-3 lorsqu’il est raccordé en interne au port

PSTN, FXO, par exemple, lorsque le périphérique est mis hors tension.

 Si le produit est équipé d’une interface USB (esclave et/ou maître) ou d’un autre type de connecteur avec

un blindage métallique, il est interdit de relier le port Phone, VoIP, FXS au port PSTN, FXO ou au port
DSL, ADSL, SHDSL, VDSL, Line par un moyen quelconque, par exemple, à l’aide d’un câble
téléphonique externe.

 Tous les autres ports d'interface (par example, Ethernet, 10/100Base-T/MDI(-X), USB, Console, Craft, etc.), y

compris l'entrée d'alimentation basse tension depuis l'alimentation du réseau: circuits TBTS.

Alimentation électrique

L'alimentation du produit doit respecter les spécifications en matière d'alimentation figurant sur les étiquettes.
L'alimentation doit être de classe II, être une source à puissance limitée conformément aux exigences de la norme
CEI60950-1/ EN60950-1, clause 2.5, aux caractéristiques nominales comme indiquées sur l’étiquette fixée sur le produit.

Elle doit être testée et répondre aux normes nationales ou locales.
Pour le Canada : Ce produit est destiné à être utilisé avec une alimentation directement enfichable, ou module de

bureau et cataloguée de classe 2 aux caractéristiques nominales comme indiquées sur l’étiquette fixée sur le produit.
L'utilisation d'autres types de sources d'énergie est interdite. Si vous n'êtes pas certain du type d'alimentation
nécessaire, veuillez consulter la documentation fournie avec le produit ou contacter votre revendeur local.

11

ISDN

!

!

Avertissement !
Pour le Canada : N'utilisez pas le port ISDN et n'essayez jamais de connecter ce port au réseau.

USB

L'appareil doit être connecté à un port USB identifié qui réponde aux besoins d'une source à puissance limitée.

Câble téléphonique

ATT ENTI ON

Pour réduire les risques d'incendie, utilisez uniquement des conducteurs de télécommunications 26 AWG ou
de section supérieure.

Connectez uniquement le câble téléphonique dans la prise PSTN, FXO, DSL, ADSL, SHDSL, VDSL ou Line du
produit. Ne le branchez jamais dans une autre prise du produit.
Suivez la procédure pour connecter les câbles au produit en suivant la séquence décrite dans le guide d'installation.

Répartiteur central / filtre(s) distribués (le cas échéant)

Si les signaux téléphoniques doivent arriver sur la même ligne, un répartiteur central ou un (des) filtre(s) distribué(s)
doivent être installés pour garantir une performance DSL optimale.

Selon votre configuration DSL et le type de répartiteur/filtres, l'installation doit être effectuée par un membre du
personnel d'entretien qualifié. Consultez votre opérateur de télécommunications ou votre fournisseur de service DSL
pour obtenir des instructions.

Accessibilité

L'alimentation enfichable directement ou la fiche de prise de courant du câble d'alimentation aussi de système de
déconnection. Assurez-vous donc que le socle de la prise dans laquelle vous branchez le cordon d'alimentation est
facilement accessible, et est située le plus près possible de l'équipement.

Surcharge

Ne surchargez pas les socles des prises du réseau d'alimentation ni les rallonges car ceci augmente les risques
d'incendie et de choc électrique.

Entretien

Pour réduire les risques de choc électrique, ne démontez pas ce produit. Aucune de ses pièces internes ne peut être
remplacée par un non-professionnel; il n'y a dès lors pas de raison de l'ouvrir. L'ouverture ou le retrait des couvercles
peut vous exposer à des tensions dangereuses. Un remontage incorrect peut entraîner un choc électrique lors de
l’utilisation suivante.

Si votre appareil doit être réparé ou révisé, confiez-le à un distributeur agréé.

12