4
OOppeerraattiinngg IInnssttrruuccttiioonnss::
ENSURE THAT PROBES ARE INSERTED INTO THE MEAT
1. Switch the transmitter and the receiver to ON.
2. Insert probe 1 and 2 into the side panel
3. Press PROBE to for setting the temperature for Probe 1 or Probe 2
4. Press MEAT button for selecting the types of meat :
Beef, Burger, Lamb, Veal, Pork, Chicken, Turkey, Fish, Duck or Other
5. Press TASTE button for selecting the cooking status of the meat :
Welldone, Medium, Medium Rare, Rare
>> The TARGET temperature will be changed on the bottom left
6. Press the START button on top of the receiver.
When the temperature at Probe 1 or Probe 2 reaches the 5 degree below the optimal
temperature, it will transmit the data to the receiver. In return, the receiver will announce a
short beeping sound. When the temperature reaches 30 seconds or 5 degree celcius of the
optimal temperature, the receiver will announce short beep of 2 times and then when the
temperature reaches the optimal temperature, it will announce a long beeping sound with
flashing from the LCD.
7. Press the SOUND button to turn off the beeping sound.
l User can test the function of the data transmission by pressing the Test button (located
inside the battery compartment)
l User can switch the temperature to Fahrenheit / Celcius switch (located inside the
battery compartment)
l User can switch the ID so that there is no interference of for other users within the
same atmosphere.
l Out of Range – when the receiver is out of range over 120’ (40 m) eye of sight, it will
alert the user with a short beep every 4 seconds.
PDF created with pdfFactory trial version www.pdffactory.com