Technaxx Video Watch Compass HD, Video Watch Compass HD 4GB User Manual

Technaxx Video Watch Compass HD 4GB

User Manual

Please find the Declaration of Conformity for this device under following internet-link:

www.technaxx.de//konformitätserklärung/video_watch_compass_hd_4gb

Charging and low battery status

1. This watch has a built-in rechargeable Li-battery which can be charged by

connecting the watch’s USB interface with adapter or computer USB interface.
After connected it, the red light and the blue light both turn ON, and then the red
light turns OFF while the blue light flashes slowly, indicating its charging. When
the blue light constantly is ON, it indicates that the device is fully charged. Then
disconnect it.

2. While recording video or taking pictures, the blue light flashes quickly when
the battery becomes a low status. The camera turns OFF automatically. Before
the camera turns OFF, it saves the files.

Buttons

1. Power/Video-Photo-Audio button: press and hold the button to turn on/off,
press shortly to record a video

2. USB interface

3. Mode button: press shortly to change function mode

4. Camera lens

5. LED indicator

6. Microphone

7. Time setting

8. Compass
RESET: Press down the Power/Video-Photo-Audio button (1) together with the
Mode button (2) at the same time

Operation Methods

1. Turning camera ON

Press and hold down the Power/Video-Photo-Audio button for two seconds. The
red light and blue light both turn on at the same time. The red light turns off while
the blue light keeps on shining (it indicates power on and standby time mode).

2. Turning camera OFF

In the standby/video mode press and hold down the Power/Video-Photo-Audio
button. The red light flashes for three times and then turns off. When the camera
is not used 3 minutes after powered on, it will power off automatically.

3. Recording a video

In the standby time mode, press shortly the Power/Video-Photo-Audio button.
The blue light flashes for 3 times and then turns off. The video recording begins.
Meanwhile press shortly any button, the blue light flashes for 3 times. It reminds
you that it is recording a video. Press the Power/Video button 2 times shortly and
the video will be saved and you enter in the standby mode.
Note: When the camera is out of memory, the red and blue lights both flash
quickly, about 5 seconds later the camera turns off automatically.

4. Switching camera modes

In Standby mode: press mode button (3) shortly to change:

- Red LED turns ON = photo mode

- Red & blue LED’s turn ON = audio mode

- Blue LED turns ON = video mode

5. Taking a photo

In the standby mode when the red light is ON, press shortly the
Power/Video-Photo-Audio button. When the red light flashes once, a photo is
saved in JPG format.

6. Separate sound recording

In the standby mode press shortly the Mode button. When the red light and blue
light both turn on, press shortly the Power/Video-Photo-Audio button. Then red
light flashes slowly, sound recording begins. Meanwhile, press shortly the Mode
button to change into another mode and a sound clip is saved.