Technaxx TX-93 User Manual

Technaxx

®

* User Manual

Video Watch with FullHD Camera TX-93

8GB Watch for video recordings with sound

The Declaration of Conformity for this device is under the Internet link:

www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the

device the first time, please read the user manual carefully.

This device has a rechargeable battery. It must be fully charged before

first use. NOTE: Charge the battery of the device every 2–3 month if it is

not used!

Service phone No. for technical support: 01805 012643 (14 cent/minute from

German fixed-line and 42 cent/minute from mobile networks).

Free Email: [e-mail]

Keep this user manual for future reference or product sharing carefully. Do the
same with the original accessories for this product. In case of warranty, please
contact the dealer or the store where you bought this product.

Warranty 2 years

Features

 Video watch with integrated 2MP FullHD camera and microphone
 Inconspicuous camera lens in the dial
 Video resolution 1920x1080 with sound
 Separate sound recording (WAV)
 WEB cam function
 8GB flash memory
 4x IR LED for night vision ~1m
 Protection class IP65 (dust proof & water jet proof)
 Easy transfer via USB cable to a PC
 Plug & Play device

Technical specifications

CMOS sensor 1/4” CMOS 2 Mega Pixels
Lens Viewing angle 60° horizontal, IR night vision ~1m, 4x IR LED
Video resolution 1920 x 1080 (1280 x 720 interpolated)
Video / Audio format AVI , 30fps / WAV

Internal memory

8GB for video & audio files
Video recording time with sound ~35–40 minutes

Power consumption

DC 160mAh/3.7V (only video)
DC 100mAh73.7V (only IR)

Charging

Via 2.5mm jack to USB cable* (*included) or

DC 5V/1A USB power adapter** (**not included)
Built-in rechargeable 250mAh Lithium ion battery:
Charging time ~3 hours (without simultaneous recording)
Maximal recording time ~1 hour (fully charged battery)

Watch power supply / Battery

DC 1.5V/150mA / AG4 cell battery 1.5V

(not rechargeable, but replaceable)
Protection Class IP65 (dust proof & water jet proof)
Operation systems Windows 7 / 8 / 8.1 / 10
Working temperature –5°C up to 50°C
Weight / Dimensions 83g / Dial (L) 5.5 x (W) 5.2 x (H) 1.8cm
Package
contents

Video Watch with FullHD Camera TX-93,

USB charging cable with

2.5mm jack, Replacement knob for microphone, CD, User Manual

Charging Status & Low Battery Status

This watch has a built-in rechargeable (but not replaceable) Lithium ion
battery which can be charged by connecting the USB interface of the watch
with computer USB interface or an adapter** (**not included).

1. Charging: remove the knob (7) by screwing it apart and then insert the

2.5mm jack of the USB charging cable* (*included) to the watch. Insert the
USB jack of the cable to an USB port of a PC or to an USB 5V/500mAh
adapter** (**not included). After connection, the BLUE LED (9) lights up for
about 2 seconds. The RED LED flashes during the charging process. When
the BLUE LED constantly is ON (constantly shines) the watch is fully charged,
and you can disconnect the watch. Charging time is approx. 3 hours.

2. Low Battery Status: while recording a video and/or voices, the BLUE LED
flashes quickly when the battery becomes a low status. The camera turns OFF
automatically. Before the camera turns OFF, the files are saved.

Overview

1) Power ON/OFF
Video Record Button

2) Time adjust

3) Microphone

4) 4x IR LED light

5) Camera

6) IR LED light ON/OFF

7) 3.5mm jack charging slot

8) Sound Recording Button

9) Indicator LED