Technaxx®
Ultra Power Bank 10000mAh TX–70
User Manual
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the device
the first time, read the user manual carefully.
This device has a rechargeable battery. It must be fully charged before first use.
Service phone No. for technical support: 01805 012643 (14 cent/minute from German
fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
Features
Charging the most mobile devices (e.g Smartphone, tablet PC, ebook reader, etc.)
Rechargeable, portable 10000mAh lithium-polymer battery with 3.7V/37Wh Back
up power on the go 2 USB outputs for simultaneous charging of two digital devices
Charging status is shown by 4 LEDs Ideal for traveling
Technical specifications
Built-in rechargeable 10000mAh lithium-polymer battery with 3.7V/37Wh
Charging time
~ 10–11 hours
Input voltage/Current
5V/1.3 A
Voltage/Current: Output1 and Output2
5V/1A and 5V/2.1A
Working temperature
–10°C up to 50°C
Weight / Dimensions
220g / (L) 14.4 x (W) 7.3 x (H) 1.5cm
Package Contents
Ultra Power Bank 10000mAh TX–70, Micro USB to
USB charging cable, User Manual
Charge the Power Bank fully before use
Using the provided Micro USB cable and
connect the Power Bank (Micro USB port) to the
AC adapter* [*not included] (USB port). Using
the provided Micro USB cable and connect the
Power Bank (Micro USB port) to your computer/
notebook (USB port). It will take approx. 10–11
hours to fully charge the Power Bank. During
charging, the LEDs will illuminate accordingly (see
charging chart). When charging is completed, all
LEDs will remain until you disconnect the Power
Bank from the power supply.
QUICK POWER TEST: Perform the test by pressing the power button. The LEDs will
illuminate accordingly (see charging chart). After a few seconds, the LEDs will turn off
automatically.
Capacity
Charging time of the
Power Bank
iPhone 5
Sony Z1, Z2
Galaxy Note3
Galaxy
S4, S5
10000mAh
approx. 10–11 hours
4.3 times
2 times
2 times
2.3 times
Charging your Smartphone or another mobile device
NOTE: For best performance, make sure that Power Bank is fully charged. Refer to
page for charging instructions. Regularly examine the USB charging cable for any
damage to their cord plug, enclosure and other parts.
Insert the end of the included Micro USB cable or the original cable that came with
your device into the phone. Insert the other end into Power Bank.
Turn the Power Bank on by pressing the power button. The charging process will
start. To turn OFF the Power Bank, press and hold the power button long. Charging
time will depend on the type of device, your device will display the charging progress.
When charging is complete, disconnect the Power Bank from your mobile device.
Note: USB output2 one the left side. USB output1 on the right side.
Loading...