Page 1
Technaxx® * User Manual
Mini FullHD Cam TX-136
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the
device the first time, please read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
This device has a rechargeable battery. It must be fully charged before
first use. NOTE: Charge the battery of the device every 2–3 month if it is
not used!
Keep this user manual for future reference or product sharing carefully. Do
the same with the original accessories for this product. In case of warranty,
please contact the dealer or the store where you bought this product.
Warranty 2 years
Enjoy your product. Share your experience and opinion on one of the
well-known internet portals.
Features
Very small FullHD camera with 1MP CMOS sensor, clip, magnet
& wall holder (allow mounting on many surfaces) Built-in magnet
allows mounting on many metal surfaces Night vision with 6
invisible infrared LEDs Supports cycle recording (once the
memory is full, the oldest video files will be overwritten to store the
newest video files) Motion detection (~3m) Storage of files on
MicroSD* card up to 32GB class 10 (*not included) 3 modes:
video recording (1080p, 720p), automatic photo shoot by interval
(5–60 seconds), motion detection 2 video resolutions: FullHD
(1920x1080P) or HD (1280x720p) at 30fps Powered by
rechargeable 300mAh battery for ~90 minutes of video recording
Actioncam and spycam in one device
Page 2
Technical specifications
Sensor / Viewing angle 1/3" CMOS 1MP (H62) / 120°
Video resolution
1920x1080 (interpolated), 30fps
1280x720, 30fps
Video (loop recording), Automatic photo
Modes
(5–60 seconds), Motion detection
Photo format JPEG, 10MP (3648x2736)
Video format AVI, MJPG (compression)
Video length max. 5 minutes (new file every 5 min.)
Recording time ~90 min. (day) or ~45 min. (night)
Recording size 1080p: ~150MB/min; 720p: ~130MB/min
Power consumption at recording Day 110mAh / Night 230mAh
Motion detection Detection range 2–3m
Night vision 6x IR LED, 940nm (non visible), up to 4m
Connection Micro USB (charging & data transfer)
MicroSD* card up to 32GB class 10 (*not
External memory
included)
Built in rechargeable 300mAh battery
Power source
lithium-ion 3.7V
Charging time
~2–3 hours (use power adapter* DC
5V/1A, *not included)
Operating systems Windows 7/8/8.1/10, Mac 10.5 or above
Working temperature –10°C up to +45°C
Storing temperature –20°C up to +55°C
Weight / Dimensions 19g / (L) 2.7 x (W) 2.7 x (H) 2.7cm
Mini FullHD Cam TX-136, Micro USB
Package contents
charging cable, Back clip, Magnet, Wall
holder, User Manual
Hints for Environment Protection: Packages materials are raw
materials and can be recycled. Do not disposal old devices or
batteries into the domestic waste. Cleaning: Protect the device
from contamination and pollution (use a clean drapery). Avoid
using rough, coarse-grained materials or solvents/ aggressive
cleaner. Wipe the cleaned device accurately. Distributor:
Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388
Frankfurt a.M., Germany
Page 3
Product view
1 Mode (M button) 5 Microphone
2 Indicator light (LED) 6 Camera lens
3 ON / OFF 7 Infrared LEDs (6x)
4 Micro USB 8 MicroSD card slot
NOTE: TX-136 is not waterproof! The ON/OFF button up is the
right direction for recording!
Getting started
Connect the camera with the included Micro USB cable to the
PC or to an USB adapter* (DC 5V/1A *not included) or a mobile
device like a power bank. The charging indicator flashes RED when
camera is OFF. This indicates that the camera is charging. RED
light is always on when fully charged. The battery can be fully
charged within 2–3 hours. Note: It is also possible to record while
charging cable is connected. Make sure the power supply delivers
1A or more. Connect a power source (not a PC) and long press the
ON/OFF button. Then the BLUE & RED LED will light up. Wait until
the blue LED is steady on. Then you can choose the mode by
pressing M button. It may not work although the device is
connected to the power supply. Just try again.
Insert the MicroSD card correctly into the card holder.
To remove the MicroSD card: Press gently on the end of the
memory card, the card will be ejected.
Page 4
Note:
The camera is not equipped with built-in memory. Insert a preformatted memory card before use.
Format MicroSD card with max. 32GB to FAT32. Normally
MicroSD cards are formatted when you buy them.
Long press (2 seconds) the ON/OFF button, the indicator
light turns BLUE. Device is turned on and waits for mode to be
chosen.
To turn off: Long press the ON/OFF button for 5 seconds the
indicator light turns off. The device is powered off.
The correct positioning of the camera is to have the
ON/OFF button always on the top. The video and photo recordings
have the correct orientation.
Modus (indicator lights)
LED Meaning
RED & BLUE light flash rapidly for 5
seconds and device shuts down
low battery power
no memory card
RED light flashes charging
RED light always on with charging
fully charged
cable inserted
BLUE light Video mode
RED light Photo mode
RED & BLUE light Motion detection
Settings
Camera settings (time stamp, resolution, lag of 5–60 seconds) are
done with a file which is saved to the MicroSD card. This should be
done before using the device.
Time Modification
Turn on the camera. The BLUE LED turns on. Meanwhile was a
text file created on the MicroSD.
Page 5
Connect the camera with the Micro USB cable with the USB
port to your PC (if necessary press the ON/OFF button). Or remove
the MicroSD from the camera and attach it to your PC (if necessary
use SD card adapter).
Open the MicroSD path on your PC when it does not open
automatically.
Double click the time.txt file. It opens with the standard
Editor.
Change the date & time. Keep the format only change
the numbers! DD/MM/YYYY HH:MM:SS Y/N
You can also change the resolution and the lag in the
Camera Mode Setting
Time.txt Function
Y = shown in video and picture
DD/MM/YYYY
Time stamp
N = does not show in video and
HH:MM:SS Y/N
picture
Choose between FullHD
1920x1080 and HD 1280x720
Resolution 1080p / 720p
resolution for your video
recordings
Choose the lag between the
Lag 5–60 seconds
automatically taken photos from
5–60 seconds.
Functions
Standby Mode
Standby mode describes the status of the camera where the
camera is turned on but no mode is chosen. In standby mode you
can switch between the different modes. While switching no
records are started.
Video Mode
The resolution (1080p/720p) of the video needs to be chosen by
the time.txt file. To activate the video recording long press the
ON/OFF button. The red and blue light is ON, and the device starts
up. Then the red light turns off and the BLUE light stays on.
Page 6
The device goes into standby mode. In standby, press ON/OFF
once, the BLUE light flashes for 3 times and then turns off. The
device starts recording. Video files are saved every 5 minutes. The
video file will be saved sequentially until the memory is full. When
the memory is full the loop function will delete the oldest file and
saves the newest. Press the button ON/OFF once to stop recording
and return to the standby mode. The BLUE light is on.
Note: When the device is in standby mode (BLUE light is always
on): no operation it turns off automatically after 1 minute.
Automatic Photo Mode
The lag (5–60 seconds) of the photos need to be chosen by the
time.txt file. To activate the automatic photo recording long press
the ON/OFF button. The red and blue light is ON and the device
starts up. Then the red light turns off, and the blue light stays on.
The device goes into standby mode.
Press the M button once, the red light turns on and enters the
automatic photo mode. The camera takes one photo every X
seconds depending on the lag that is set. To change the mode
press the M button. To power off the device hold and press
ON/OFF button for 5 seconds.
Motion Detection Mode
The resolution (1080p/720p) of the video needs to be chosen by
the time.txt file. To activate the motion detection recording long
press the ON/OFF button. The RED and BLUE light is ON, and the
device starts up.
Then the red light turns off and the blue light stays on. The device
goes into standby mode. Press the M button twice, the red and blue
light will flash alternately until they turn off. The motion detection
mode is entered and activated. Does the device detect a moving
object, the red and blue light will turn off. When the recording has
finished the red and blue LED turn on again until new motion is
detected.
Page 7
Video files will save a video every 5 minutes. The video file will be
saved sequentially until the memory is full. When the memory is full
the loop function will delete the oldest file and saves the newest.
To change the mode press the M button. To power off the device
hold and press ON/OFF button for 5 seconds.
Night vision LEDs
The infrared night vision light turns automatically on in dark
environment.
Check the file on the computer
Connect the Micro USB cable** (**included) to the computer and
device. Either mass storage will open by itself or you have to open
it manually. View the stored video/snapshot files. If the camera has
not powered itself up while inserting the Micro USB cable, turn the
camera on. Press ON/OFF button once.
Now you will see two folders, image folder and video folder.
Choose any folders to check the corresponding files.
Warnings
The device is not waterproof.
Do not attempt to disassemble the device, it may result in short-
circuit or even damage.
Do not drop or shake the device, it may break internal circuit
boards or mechanics.
Keep the device in dry and ventilated environment, avoid high
humidity and high temperature. Also batteries should not be
exposed to excessive heat or direct sunlight.
The device will be hot after using for too long time. This is
normal.
Use the accessory provided by our factory.
Keep the device away from children.
Loading...