Technaxx TX-100 User Manual
Technaxx® * User Manual
Car Alarm with charging function TX-100
& Remote Control for monitoring of vehicle interiors via PIR
motion detection sensor
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares
that this device, to which this user manual belongs, complies with the essential
requirements of the standards referred to the Directive RED 2014/53/EU. The
Declaration of Conformity you find here: www.technaxx.de/ (in bar at the
bottom “Konformitätserklärung”). Before using the device the first time, read
the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
This device has a rechargeable battery. It must be fully charged before first
use. NOTE: Charge the battery of the device every 2–3 month if it is not used!
Keep this user manual for future reference or product sharing carefully. Do the
same with the original accessories for this product. In case of warranty, please
contact the dealer or the store where you bought this product.
Warranty 2 years
Enjoy your product * Share your experience on Amazon
Features
12–24V rechargeable car alarm for the cigarette lighter socket
Has 2 USB charging ports with 5V/1A output power each
Automatic alarm triggering at motion detection by PIR sensor
(Passive Infrared sensor for physical movement detection for the
car's interior)
Built-in 450mAh battery for ~6 days standby time ensures alarm
triggering even when engine is switched off
Built-in alarm siren with 110dB
Remote control to activate and deactivate the alarm
LED status indicator
Over-current protection 2.8A & short circuit protection
Easy handling and installation
Technical Specification
~3m car interior (without obstacles (e.g. rear
Detecting distance
wall in trucks)
Detecting range 120° cone angle
Distance IR remote control ~8m (open field)
Alarm time 2 minutes maximum
USB output charging 2x 5V/1A
Built-in rechargeable 450mAh lithium polymer
Power
battery 4.2V
Charging time ~3–4 hours
Working time ~5 days (by alarm 5-times a day)
Standby time ~6 days
Input voltage DC 12–24V (cigarette lighter socket)
Charging current 65mA
Operating current 26mA
Transmission frequency 433.92 MHz
Frequency type ASK
maximum 20mW (by pressing remote
Radiated output power
control button, not continuously)
Material ABS
Weight / Dimensions
44g / (L) 3.2 x (W) 3.2 x (H) 11.5cm
car alarm
Weight / Dimensions
10g / (L) 5.3 x (W) 3.1 x (H) 1.0cm
remote control
Car Alarm with charging function TX-100,
Package Contents
Remote Control (with button cell battery
CR2032 3V), User Manual
Product overview
4
5
6
Car Alarm / Charger
Remote Control
PIR (Motion detection)
1
USB charging slot
2
(2x 5V71A)
Siren
3
Indicator (confirmation)
Remote control button
(activate/deactivate)
Battery compartment of remote
control
Loading...