Page 1
1
Technaxx® * User Manual
HD Outdoor Camera with LED Lamp TX-106
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the
device the first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
If you drill a hole in the wall, please make sure that power cables, electrical
cords and/or pipelines are not damaged. When using the supplied mounting
material, we do not take the liability for a professional installation. You are
entirely responsible to ensure that the mounting material is suitable for the
particular masonry, and that the installation is done properly. Also ensure that
the mounting place is strong enough to hold this heavy device. When working
at higher altitudes, there is danger of falling! Therefore, use suitable
safeguards.
Keep this user manual for future reference or product sharing carefully. Do
the same with the original accessories for this product. In case of warranty,
please contact the dealer or the store where you bought this product.
Warranty 2 years
Enjoy your product. Share your experience and opinion on one of the
well-known internet portals.
Features
⚫ Multi functional: video recording with sound, photo, light
⚫ PIR motion detection of 60° angle up to ~7m (open areas)
⚫ PIR trigger time 1–1.5 seconds
⚫ Light in high brightness of 150 lumen (2W) up to ~8m distance
(open areas) & luminous time ~20 seconds
⚫ Alarm at low battery by LED indicator light
⚫ Stand alone device powered by batteries
⚫ Wall mounting (360° rotation, 180° up/down)
⚫ Many other mounting possibilities e.g. in the garden with the
ground mounting holder
⚫ Protection class IP65 (dust & waterproof)
Page 2
2
Technical specifications
Image sensor
1/4" CMOS 2MP
Video format / Video file
720p, 25fps / MP4
Photo format / Photo file
1280x720 Pixel / JPEG
Camera lens
F=2.0, FOV 92° horizontal / 92° vertical
PIR
max. distance ~7m / angle 60° / trigger time 1–1.5
sec.
Light
distance ~8m / power 2W, 150 lumen (20W
incandescent bulb) / Colour: 6000–6500 Kelvin
Storage
MicroSD* card up to 32GB (Class10)
[*not included]
Power supply
4x D-cell alkaline batteries* 1.5V
[*not included, not rechargeable]
Ø duration
battery life
Video mode 20x at night ~2.5 month
Photo mode 20x at night ~7 month
Light mode 20x at night ~2 month
Low battery
4.5V (LED is blinking in red)
Operation temperature
–10°C up to +40°C
Weight / Dimensions
400g / (L) 19.5 x (W) 15.0 (H) 10.5 cm
Package
Contents
HD Outdoor camera with LED lamp TX-106, 1x
Ground mounting holder, 3x Screws with dowels,
User Manual
Note: These parts are needed to operate but are not included.
4x D-Alkaline batteries, 1x MicroSD card (Class10) up to 32GB
(FAT32 formated), MicroSD card reader or other device to
download media from MicroSD card to PC, PC to set time and
date (use “time.txt file”) → watch the recorded video and photo
files).
Security and Disposal Hints for Batteries: Hold children off batteries. When
a child swallowed a battery go to a doctors place or bring the child into a
hospital promptly! Look for the right polarity (+) and (–) of batteries! Always
change all batteries. Never use old and new batteries or batteries of different
types together. Never short, open, deform or load up batteries! Risk of injury!
Never throw batteries into fire! Risk of explosion!
Hints for Environment Protection: Packages materials are raw materials
and can be recycled. Do not disposal old devices or batteries into the
domestic waste. Cleaning: Protect the device from contamination and
pollution (use a clean drapery). Avoid using rough, coarse-grained materials
or solvents/aggressive cleaner. Wipe the cleaned device accurately.
Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388
Frankfurt a.M., Germany
Page 3
3
Product overview
1
PIR (motion detection)
5
LED light
2
Microphone
6
Angle adjustment
3
Camera
7
Mounting base thumb
4
Status LED (red / green)
8
Mounting base
How to use the camera
A.1 A.2
Remove the front
cover by rotating
counter-clockwise
→ picture A.1 and A.2.
B.1 B.2
Open the lock → picture B.1.
Insert 4D-Cell batteries →
picture B.2.
Note: Install batteries with
polarity in correct position.
Page 4
4
C.
1 = MicroSD card slot
Insert a MicroSD card into the
MicroSD card slot (C.1) → close the
battery compartment and then the
lock. → slide the switch to your
desired setting (Video / Photo / Light /
Off → see chapter Mode Settings)
Correct the time, see chapter “How to
set time and date”.
D.1
By removing the screw 2, you can
remove the head from the mounting
base for angle adjustments.
D.2
Hold the base to the installation
surface and mark the screw holes
with a pencil.
D.3
Drill holes on the marks into the wall
→ insert the dowels → drive screws
through the holes of the mounting
base.
Attention: asure that you use the
correct dowels for your desired
surface → the dowels in the package
contents are for normal concrete
walls.
Page 5
5
E.1
Replace the front cover by turning.
Important: The arrows must match
when closed.
→ When closed, the camera is
waterproof to IP65.
E.2
Put the head back on the basis
→ tighten the screw 2
F.1
Loosen the screw 1 (little by little)
→ turn the device to the right position
(max. 360° around)
→ tighten the screw 1
F.2
Loosen the screw 2 (little by little)
→ bend the device to the right
postion (max. 180°)
→ tighten the screw 2
Page 6
6
Mode settings
Video Mode
Photo Mode
Only Light Mode
1 = Micro USB port
2 = Mode Switch
Note: Use only new alkaline D-Cell
batteries with 1.5V rating. Do not mix old
and new batteries. Install batteries with
polarity in correct position.
(a) Video Mode
Switch the mode switch to VIDEO. The green status LED flashes as
soon as motion detection (PIR) is triggered. Videos are stored on
the inserted MicroSD card. Stop taking videos after 20 seconds
when there is no more movement. If during 20 seconds there is still
movement the video clip will continue recording. When the MicroSD
card is full, the oldest recording will be deleted and restored with the
newest recording. Light turns on with video in darkness, when
motion detection is triggered.
Note: Night videos drain more power resulting in shorter battery life.
Page 7
7
(b) Photo Mode
Switch the mode switch to PHOTO. The green status LED flashes
as soon as motion detection (PIR) is triggered. Photos are stored
on the inserted MicroSD card. Stop taking photos after 20 seconds
when there is no more movement. If during 20 seconds there is still
movement the camera will continue taking photos. After trigger
photos are taken every 2 seconds. When the MicroSD card is full,
the oldest recording will be deleted and restored with the newest
recording. Light turns on with photo in darkness, when motion is
triggered.
(c) “Light only” Mode
Light shuts off after 20 seconds if there is no more movement. If
during 20 seconds there is still movement the light will continue
shining for 20 seconds. Light goes on only in darkness to conserve
battery life.
(d) OFF mode
The OFF mode is the safe mode when any action must be taken,
e.g. replacing the MicroSD card/the batteries or transporting the
device. No video, photo or light will be turned on in this mode.
Set time & date
1 = Micro USB function
Before setting the time and date, format
the MicroSD card in a Windows PC.
File system: FAT32
Size of the allocation units: 32KB
This formatting prevents videos from
playing fast in playback.
Page 8
8
Note: Pay attention, when you set time & date, put the function
button to OFF position. A connection to the PC is only established in
the OFF position.
We suggest you to set time & date after battery replacement or long
period disuse the device.
1. Go to Technaxx.de → Support → Video Ueberwachung →
TX-106 and download the TimeSynchronize file.
Note: WinRar or Zip to unzip the file is necessary!
2. Insert MicroSD card to the camera (if not already inserted) and
connect the USB cable with computer.
3. Start the UsbTime.exe with a
double click to sync time&date
of TX-106.
4. The Software should show
the removeable disk, the
TX-106 under Device.
5. Click “Get Current Time” this synchronizes the time with computer.
It is better to add 30 seconds to the current time in Second position
because the time is synchronized when you restart the camera.
6. Then click the button “SET time” to finish time setting.
7. Eject the removable disk. And then disconnect the USB
connection between TX-106 and PC. Then slide the switch to the
desired mode.
Watch videos
To watch recorded videos on your PC, insert the MicroSD card
directly into the MicroSD card slot of your PC.
In case your PC does not have a MicroSD card slot, either use a
MicroSD adapter card, or connect the device with a Micro USB
cable to your PC. The camera function button put in OFF position!
The device now should be recognized as removable disk.
Page 9
9
PIR detecting range
Remark: The PIR detection
area is 60°. Moreover, the PIR
detection range is affected by
the environment temperature
(25°C is the best temperature).
Ground Mounting holder
With the ground mounting holder* (*included) you can you use the
device as path light with camera or as path light in your garden.
Battery life
It is depending on the mode you select as a default. Long battery
life is one of the most important requirements. There are several
variables that will determine the battery life (type of batteries,
temperature outside, frequency of activity, etc.) Night video and
photo frequency (light and record) will result in shorter battery life.
Different brands of batteries may also perform better than others, so
please experiment to find what works best for you.
Attention: If RED status LED blinks, insert new batteries. Notice:
Should battery fluid leak from a battery, wipe the battery case with a
soft cloth dry and put in a new batteries.
Page 10
10
Middle values for battery life
Video mode 10x / 20x / 30x times at night
(~3 / 6 / 10 minutes)
up to 5 / 2,5 /
1,5 month
Photo mode 10x / 20x / 30x times at night
(~1 / 2 / 3 minutes)
up to 10 / 7 / 3
month
Light mode 10x / 20x / 30x times at night
(~3 / 6 / 10 minutes with average brand alkaline)
up to 6 / 2 / 1,2
month
Light mode 10x / 20x / 30x times at night
(~3 / 6 / 10 minutes with top brand alkaline)
up to 8 / 4 / 2,4
month
WARNINGS
(To reduce the risk of fire, electrical shock or product damage/failure)
⚫ Do not expose unit with the cover open to rain, moisture, dripping
or splashing. ⚫ Do not open or close the battery door with wet hand.
Completely wipe off water on unit before opening.⚫ Do not
submerge product in water (this unit is designed for normal outdoor
use). ⚫ Only use batteries as specified in this user manual and
install according to correct polarization. Failure to follow may result
in leaking or exploding batteries, damage to product, fire or
personal injury. ⚫ Do not handle damaged or leaking batteries.⚫ Do
not expose to extreme heat. Do not leave product and/or batteries
exposed in direct sunlight inside a vehicle, or other contained
environment for a long period of time. ⚫ Only use accessories as
recommended in this manual.
⚫ TECHNAXX recommends using 4 pieces of D-Size Alkaline
batteries of very high standard, this product can model to obtain
maximum battery life (do not mix old and new batteries).
Rechargeable batteries are NOT recommended.
Page 11
11
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
US Warranty
Thank you for your interest in the products and services of Technaxx Deutschland GmbH &
Co.KG. This Limited Warranty applies to physical goods, and only for physical goods,
purchased from Technaxx Deutschland GmbH & Co.KG.
This Limited Warranty covers any defects in material or workmanship under normal use
during the Warranty Period. During the Warranty Period, Technaxx Deutschland GmbH &
Co.KG will repair or replace, products or parts of a product that proves defective because
of improper material or workmanship, under normal use and maintenance.
The Warranty Period for Physical Goods purchased from Technaxx Deutschland GmbH &
Co.KG is 1year from the date of purchase. A replacement Physical Good or part assumes
the remaining warranty of the original Physical Good or 1 year from the date of
replacement or repair, whichever is longer.
This Limited Warranty does not cover any problem that is caused by:
● conditions, malfunctions or damage not resulting from defects in material or
workmanship
To obtain warranty service, you must first contact us to determine the problem and the
most appropriate solution for you.
Technaxx Deutschland GmbH & Co.KG, Kruppstrasse 105, 60388 Frankfurt am Main,
Germany
* www.technaxx.de * support@technaxx.de *
Loading...