Technaxx®
LED RGB App-Bulb E27 7W
User Manual
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”)
Before using the device the first time, read the user manual carefully.
Innovative Home Technology
Control your bulb by Smartphone App!
Features
Power saving LED-bulb: 7 watts, Energy Class A, Base E27
Life span ≤ 25000 hours
Luminous flux and brightness: 490 ± 10Lm
Brightness and Colour are adjustable through the App on your Android or ios device
Illumination angle: 120°
Colour temperature: 5000K – 200K
Colour rendering: 70 Ra
Compatible with iPhone 4s or later, iPad3 or later, Android 4.3 device with Bluetooth
4.0 LE, ios 6.0 or above
Various possibilities of use, e.g. home interiors, bars, clubs, discos, etc.
1. Installation and Connection
(1) On your iOS device (iPhone, iPad), download and install the application – Nexturn
from the AppStore. On you Android device, download Nexturn from Google Play
Store.
(2) Take the bulb from the package, and fix it into the lamp holder and switch on the
light.
(3) Turn on the Bluetooth on the Apple device ( iPhone, iPad).
(4) Run the application Nexturn on your iPhone or iPad. Tap "Management" to show
device list and select the bulb to start connection.
The connection of the Smart Phone to the Bulp is depending on the wide area of the
Bluetooth. At the free space up to 20m and when some wall in between up to 15m.
2. Adjust Bulb Colour
After Bluetooth connection slide
your finger on the color wheel to
change the bulb color, or slide
your finger left and right on the
lower bar to adjust its brightness.
3. Change Scenes
On the “Scenes” screen, there are
several preset profiles for your
choice.
Different profile shows different
light effect.
You can choose one as your
favorite
4. Change Bulb Color by Rhythm
4.1. Play music on your iPhone,
iPad, Android phone or other
audio player.
4.2. In case the bulb is connected
with iPhone/iPad and music is
playing, the colour of the bulb will
change according to the music
rhythm.
5. Change Bulb Color by Picture
On the “Scenes” screen, tap to select a picture
from your iPhone or iPad.
Tap a color area on the picture and the bulb color
will change according to the selected color.
6. Control Multiple Bulbs
You can control color and brightness of a group of bulbs by the following steps:
1. In the Bulb list screen, tap multiple bulbs to pair them.
2. Once paired, tap on the upper left corner.
3. Tap to add bulbs to make a group.
4. Tap the bulb group and change its color and brightness.
You can delete a bulb group by
a) tapping at the upper right corner
b) selecting bulb group
c) selecting Deleting Group.
7. Settings
Device Name: Name the bulb.
Timing: Turn ON / OFF light automatically
at specified time.
Countdown: Turn ON / OFF light automatically
after specified countdown.
8. Management
Tap “Management” to enter the bulb list.
In this list, you can switch on or off the bulb
and bulb group.
Technical Specifications
Base / Energy class E27 / Class A
Luminous flux and Brightness 490 ± 10Lm
Color temperature (Tc) 5000 ± 200K
Color rendering 70 Ra
Brightness + Color adjustable through the App with your Android or iOS device
Power consumption 7W ± 10%
Illumination angle 120°
Voltage 100V ~ 240V
LED colours 6x White, 2x Red, 2x Green, 2x Blue
Input Power White 6W / RGB 6W
Power efficiency ≥ 80%
Service life ≤ 25000 hours
Radio Frequency 2.4GHz
Communication mode Bluetooth 4.0 LE
Transmission distance max. ≤ 20m (open range)
Withstand voltage ≥ 4kV
Lightning surge ≥ 4kV
Shell material AlN + ABS
Storage temperature –20°C ~ +65°C
Operating temperature 0°C ~ +50°C
Weight / Dimensions 142 g / Φ 7,0 cm x 12,6 cm
Package contents LED RGB App-Bulb E27 7W, User Manual
iPhone 4s or later, iPad3 or later
System requirements
Android 4.3 device with Bluetooth 4.0 LE
ios6.0 or above
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. NOTE: This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: Reorient or relocate the receiving
antenna, increase the separation between the equipment and receiver, connect the
equipment into an outlet on a circuit different from that to which the receiver is connected,
consult the dealer or an experienced radio/TV technician for help.
Hints for Environment Protection: Packages materials are raw materials and can be
recycled. Do not disposal old devices into the domestic waste. Cleaning: Protect the
device from contamination and pollution (use a clean drapery). Avoid using rough,
coarse-grained materials/solvents/other aggressive cleaner. Wipe the cleaned device.
Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt
a.M., Germany
Loading...