Technaxx Fitness Wristband Trackfit TX–63 User manual

Technaxx

®

Fitness Wristband Trackfit TX–63

User Manual

This device complies with the requirements of the standards referred to the Directive R&TTE 1999/5/EC.

The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom

“Konformitätserklärung”). Before using the device the first time, read the user manual carefully.

This device has a rechargeable battery. It must be full y charged before first use.

NOTE: Charge the battery of the device every 2–3 month if it is not used!

Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and 42

cent/minute from mobile networks). Free Email: [e-mail]

Features

 Wristband to monitor your fitness, your sleep and your active phases  Displays real
activity step, distance covered and calories burned  Clock & date display, calendar
function  Caller name or telephone number  Notifications: achieved goals, MSN, @, SMS

 Anti-lost function  Vibrating function  Sleep monitoring & wake up with vibrating alarm
 Displays statistics via diagram in the APP  Bluetooth 4.0 BLE connection, controllabl e

via APP  Free iOS and Android APP  Easy handling with 1 key  IP66 protection class
(dustproof & against waterjet)  Especially suitable for outdoor activities

Technical specifications

Bluetooth / Distance Bluetooth version 4.0 BLE / max. 10m
Display / Resolution 0.91” OLED display (2.3cm) / 128 x 32 pixels
Protection class IP66 (dustproof + protection against water jets)
Charging port at device Displacement contact
Charger USB charger with clamping function
Data transmission BT 4.0 BLE or USB

Time synchronization
Accelerate sensor Supports “3 AXIS”

Built-in rechargeable lithium-ion polymer 60mAh battery, 3.7V /

Power supply

Material PC half transparent (housing)+ TPU (wristband)
Weight / Dimensions 21g / (L) 14–19.5 x (W) 1.7 x (H) 1.1cm

Package Contents
Apple iOS Devices: supports iOS device with 4.0 BLE, iOS 7.0 and above.

Charging time ~2 hours / Working time ~36 hours / Stand-by time
~7 days

Fitness Wristband Trackfit TX-63, USB charger with clamping
function, User Manual

Supports RTC (Real Time Clock) and time
sychronization

Android Devices: supports almost all Android devices with 4.0 BLE, Android system 4.3
and above.

Approve which iOS or Android version your Smartphone is using.

View of the wristband



OLED Screen

1

Mounting hole for the wristband (from the inside)

2

Mounting hole for the closure of the wristband

3

(from the outside)

Strap colsure of the wristband

4

Charging port

5

Operation button

6

Wristband

7

1. Charging

Before first use, charge the device as shown in the picture below and make sure that the
charging hole be connected in the correct way. Be careful, not to charge in the opposite
direction, or it will lead the device to be short-circuit or scrap.

“a” with cycle =
Operation button



TX-63 indicates the battery charge level as when it is being charged. If
not, check whether you charge it in the correct way and make sure the USB interface is

connected in correct way.

TX-63 can be charged directly via USB (5V). It shows when it is full
charged. Standby time are ~ 7 days (depending on the actual usage).

Do not try to take out built-in battery in case of danger . Use the TX-63 USB charging line for
charging. Please keep using and charging it.

TX-63 Bluetooth will be off and cannot sync data while being charged.

2. Download & installion My Fitness Pro APP

Android APP: Search for Technaxx “My Fitness Pro“ in GoogleTM Play Store to download

the APP.

iOS APP: Search for Technaxx “My Fitness Pro“ in AppleTM Store to download the APP.

Install the respective APP.

3. Device initialization

The device will display when you use it for the first time. Press the button
for more than 3 seconds until time displays on the screen that means the initialization is

completed.

3.1. How to use Android APP and iOS APP

3.1.1. Sports

Main function: upload sports and sleep data, sync time, check steps/distance/calories/

battery usage state for every day/every week/every month.

3.1.1.1. You can upload data, sync time and check battery usage state all by
Synchronization the TX-63 with your phone

When using TX-63 for the first time, synchronize it with your mobile phone via the
„My Fitness Pro“ APP.

1. Activate Bluetooth, internet on your phone, open the APP, register it and then you will see

the main interface, click in the Sports interface.

2. Quickly press the button of TX-63 to light screen (do not hold the button for a long time,
in case it will switch into the Sleep mode).

3. The APP will display when in syncing until it’s 100% completed.

4. The first time synchronization means reset for TX-63, so after this down all existed data
will be cleared of wristband.

3.1.1.2. How to check steps, distance, calories and sleep data by APP

Click the triangle icon to choose a date which you need to
check, then click steps, distance, calories, sleep for detail data check at that day.

. The user can also choose “Day””Week””Month” to check the

data statistics.

3.1.2. Reminder

Main functions: create, add, modify, update and delete a reminder

3.1.2.1. How to create a reminder

Tap “+” to choose a reminder’s time and type; to choose the

reminder’s happen date by “self-defined repeat”. Click

Notice: 20 reminders could be created at most.

3.1.2.2. Reminder Modification - How to modify an reminder’s mode

to save the reminder.

In the interface

Reminder. When the reminder icon changes to
vibration following the settled time. Otherwise, it will not remind you.

, click in one of the reminders to turn on or turn off the

, the device will remind you by

3.1.2.3. How to modify an reminder’s content

Click in the main interface, then click the to modify the reminder
content. How to operate you can refer to 3.1..2.2.

3.1.2.4. How to delete an reminder

Click the Edit , then click the item’s left side .

3.1.3. Setting

3.1.3.1. My profile

Click on to “Setting” and put in your information. First, under “My Profile”, it is important
to record accurate information to ensure that the reading and outcome will be more
beneficial to the user. Here you can add information’s such as your name, your size and

your weight.

3.1.3.2. Preset sleeps

Click on Preset sleep to enter your desired bed and wake up time automatically. Close it th
e device will not enter the sleep mode automatically.

3.1.3.3. Goals

Set the goals of steps, distance, calories and sleep by rolling up and down, click the

“Done” for confirmation, or click the “Cancel” for reset. Click on “Save” once finishing.

3.1.3.4. Reset

Go in the APP in the menu “Settings”. Tap “Decoupling” and decouple the wristband from
your mobile phone. The wristband will reset to factory defaults.

3.1.3.5. Time format

Time format can be 12 hours or 24 hours

3.1.3.6. Log out
Click “Log out” can quit the account, or change to other account.

3.1.3.7 If nothing works !

Press and hold the button on the wristband. Only then connect the wristband to the power
supply. The icon for battery charging appears. The wristband will be activated and can now
be operated normally again.

. Click the save once finishing, return for

4. Display mode

4.1. Set up

Once reset the device or for the first use, it will show SET UP.

4.2. Activity mode

Interfaces of activity mode are as following:

1. Time, Date, Battery

2. Steps

3. Distance

4. Calories

It will display the data and reminder you once finishing targets under the activity mode.
Lighten the display by pressing the button can open the device Bluetooth. The device will
record the intraday data; data will be zero clearing on 24:00 automatically.

4.3. Sleep mode

Interfaces of sleep mode are as following:

1.

2.

It will record the user’s sleep status under the sleep mode. Reminder notifications are
disabled during this period of time.

Time, Date, Battery

Sleep

4.4. Switch of activity mode and sleep mode

Press the button for 3 seconds under the activity mode, it will vibrate you and enter the
sleep mode

seconds, or it exits according to user activity automatically. Device shows and records the
data as long as switching the relevant mode.

. User can exit sleep mode by pressing the button for 3