Technaxx TX-69, 8MP TX-125 User Manual
1
Technaxx
®
* User Manual
Nature Wild Cam TX-69
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the device
the first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
Keep this user manual for future reference or product sharing carefully. Do the same
with the original accessories for this product. In case of warranty, please contact the
dealer or the store where you bought this product. Warranty 2 years
Contents
Features ........................................................................................................ 1
Camera overview ........................................................................................... 2
Power supply ................................................................................................. 2
Inserting the memory card ............................................................................. 3
Basic Operation ............................................................................................. 3
Using the wall bracket .................................................................................... 9
Connecting to TV ......................................................................................... 10
Download files to the computer .................................................................... 10
Technical specifications ................................................................................ 11
Features
Security camera battery operated for indoor and outdoor use
Ideal for recording and observing the wildlife and for monitoring houses
FullHD video resolution 1080p
2.31” TFT LCD display (960x240)
1/2,5" CMOS sensor with 5MP
Select functions: video, photo, video & photo
PIR sensor (~15m) & IR range (~20m) for night recordings
Triggering time 0.6 seconds
Built-in micophone & speaker
MicroSD card** up to 32GB (**not included in delivery)
Camera protection class IP56 (dust proof & heavy splash water proof)
2
Camera overview
1
Display screen
11
Down button /
Capture button
2
Up button / Video button
3
Right button
12
MicroSD card slot
4
Shot button
13
AV port
5
OK button
14
USB port
6
Speaker
15
OFF
7
ON
16
Test
8
Left button
17
Infrared LEDs
9
Menu button
18
Lens
10
Replay button
19
PIR sensor
Power supply
Before use, install 4x or 8x pieces of AA batteries* 1.5V (*included) in the
correct polarity. Open the camera case and remove the battery cover. [If
only using 4x AA batteries, they must be installed together in the same part of
the battery housing – top or bottom. Note: With only 4x AA batteries the life
span will be only half of the time it could be.]
3
Inserting the memory card
The camera has no built-in memory, therefore insert a formated (with FAT32)
MicroSD card** up to 32GB (**not included) for saving files.
Attention: Do not insert the MicroSD card forcibly; refer to the marking on the
camera. The MicroSD card should have same temperature like the ambient
temperature. The camera will be short-circuiting influenced by environment
temperature and humidity. Notice protection for the camera when using it
outdoor.
If the capacity of MicroSD card is full, the camera will stop recording
automatically. The LEDs will go out (when Endless Capture is OFF).
Press the edge of the card gently to pop-out the MicroSD card.
Basic Operations
Turn On and Off the camera
Switch the MODE button to “Test/On” to turn on the camera.
Switch the MODE button to “Off” to turn off the camera.
System Setup
Switch MODE button to “Test”, then you can set the system parameters.
Press Up/Down button to switch between Video and Photo mode.
Press Menu button to open the setup menu.
Press Up/Down button to scroll through all menus. Then press OK
button to enter the options interface.
Press Up/Down button to scan all options. And press OK button to
confirm options.
Press MENU button again to turn back to last menu or exit the
setup menu.
Setup menu and function as below:
Mode: [Photo] / [Video] / [Photo & Video] (default). Select and press OK
button to confirm.
Set the
working mode
Capture mode
Camera only takes pictures.
Video mode
Camera only records video.
Capture & Video mode
(default)
Camera will take a photo first,
and then start to record video.
4
Photo Series:
Set photo number
of continuous
shooting
Photo mode
Camera will take photos continuously
Options: [1 photo] (default) / [2 photos in series] /
[3 photos in series].
Select and press OK button to confirm.
Photo Resolution: Set the image resolution: the bigger the resolution the
higher the sharpness! (It will take bigger space either.)
[12MP (4000x3000)] / [8MP (3264x2448)] / [5MP (2592x1944)] (default) /
[3MP (2048x1536)] / [1MP (1280x960).
Select and press OK button to confirm.
Video Resolution: [1920x1080] / [1280x720] (default) / [720x480] / [640x480]
/ [320x240]. Select and press OK button to confirm.
Set the video resolution: the bigger the resolution the shorter the recording
time.
TL-Video Resolution: Set the resolution for the Time Lapse [2592x1944] /
[2048x1536] and press OK button to confirm.
Video length / Audio recording
Video length
Set the duration of recording a video clip shortest time is 3
sec. / longest time is 10 min.
Options: 3 sec. – 10 min. (default is 30 sec.)
Select and press OK button to confirm.
Audio
recording
Open this function camera will record audio when
recording video.
Options: [On] (default) / [Off].
Select and press OK button to confirm.
Shot Lag: 5 sec. – 60 min. Select and press OK to confirm.
“Short Lag” is the time between the current video and the next video. Set the
time of delay shooting when the camera detects the motion. Within the
selected time, the camera will not record any image or video. It can avoid
storing too much of the same event and saving more storage. (Default is 5
seconds.)
IR Distance: (set the distance of infrared induction): [Near] / [Middle] (default)
/ [Far]. Select and press OK button to confirm.
Note: Maybe you have to adjust the right option for your personal use.
Loading...