Technaxx 1080P TX–14 User Manual

CarHD Camera 1080P TX–14

User Manual

Declaration of Conformity: www.technaxx.de/ (in bottom bar “Konformitätserklärung”)

Before using the device the first time, read the user manual carefully.

Attention: In order to help you operate it correctly please read this instruction carefully
using. Charge the device once before use. Important: During usage connect the device
directly to the cigarette lighter socket of your car!

Features

 Car camcorder (video & photo & playback function) with Full HD resolution
 2.7” high resolution LTPS display (16:9)
 Supports MicroSD memory card (up to 32GB)
 120°A and high resolution wide angle lens (3.0 mega pixels, JPEG format)
 4x digital zoom, ranges from 12cm to limitless distance
 WDR (Wide Dynamic Range technology)
 1920 x 1080P FULL HD high quality video resolution
 Advanced MOV H.264 video compression technology
 Supports HDMI hight quality video transmission
 Start video recording: automatic video recording with record time setting
 Shows time and date on video and pictures
 G-sensor function (explanation see later)
 Anti-Shake mode
 1080P 30fps, 720P 30fps, smooth video flow
 Microphone & Speaker
 Built-in simultaneous charging and recording mode
 Motion detect function
 USB2.0 and HDMI output
 Live playback function (watch video while recording a video)
 Auto power on when starting car and Auto power off when car is off
 Continuous cycle recording mode: in case of full storage, recording goes on. Existing

files will be deleted one after the other.

 Plug into car cigarette lighter as a power supply for video recording while driving.
 Camera installation on bracket, easy to fix and to dismantle
 Bracket installation on windscreen by suction cup

Product Overview

1
2
3
4
5
6
7

4
5
9
10
11
12

USB port
AV port

No function

POWER button
MENU button
Lens
Speaker

DESCRIPTION OF THE KEYS

POWER button Switch the camera ON / OFF
MENU button Select optional menu
UP button Up / Zoom
DOWN button Down / Zoom
REC button Start video recording / Pause video recording
MODE button Switch between operation mode and corresponding

menu (video, photos, playback mode)

8
9
10
11
12
13
14

MicroSD card slot
UP button
DOWN button
REC button / OK button
MODE button
HDMI port
RESET button

Starting to use the car camcorder

Placing the MicroSD card: Insert a MicroSD card into the memory card slot by pushing

it carefully until you hear a “Click” sound. Remove the MicroSD card by pushing it once
and then remove it after it pops out.

Turning ON / OFF: Press the POWER button once to power on, blue light

indicator is on. Press the POWER button again to power off, blue light indicator is off.

Attention: Low battery is displayed before shutting down.

Video recording starts when MicroSD card is inserted; you can stop the video

recording by pressing the OK button for 2-3 seconds. When pressing the OK button
shortly, video recording starts again.

Changing Batteries – 3 ways possible

1. In-car battery charging with 5V charger* for the cigarette lighter (* included)

2. Using USB cable** to charge battery (** included)

3. Using an AC adaptor*** to charge battery (*** not included)
Red light indicator is on while charging. Full charging time is about 3 hours. Red light
indicator will turn off when the device is fully charged. Notice: Therefore a fully charged
battery approx. last about half an hour, it is recommended to plug the camera to the
cigarette ligher socket of a car during usage.

When the camera is fixed on bracket you can rotate it in different directions, the picture
you see on the display always will be in the correct upright position. But in case you
rotate the camera, then record a video and later watch this video on your PC screen, the
file is shown in the rotated position; you cannot (!) change the viewing angle later on the
PC screen.

G-Sensor Function: In case of a hard impact (e.g. a collision) or a very strong shock
(from 6G, e.g. the car rolls over) the video that is being recorded is stored automatically.
In addition, the video is LOCKED for deletion and an icon will appear on the screen. By
this function, the incident course of events can always be played back later.

Switch between different modes by pressing the MODE button

Setting Mode

System setting: Press MENU button once, press MENU botton again to enter the

“System Setting” option. A blue background will be displayed.
Format: Format the MicroSD card (Attention: this action will delete all data stored on
the MicroSD card!)

Language setting: You can choose between.. Confirm by pressing the OK button.
Reset system settings: Cancel / Proceed. Confirm by pressing the OK button.
Date / Time setting: Set Date / Set Time. Confirm by pressing the OK button.