Techly I-PP 16-RU-C5ET, I-PP 24-RU-C5ET, I-PP 24-RS-C6T, I-PP 16-RU-C6T, I-PP 24-RU-C6T Quick Guide

19"PATCH PANEL

Thank you for purchasing this TECHLY PROFESSIONAL

easy-to-use panels that let you consolidate your network cables to reduce clutter.

have selected a model for use with Cat5e or Cat6 cables, unshielded twisted pair
shielded, from 12-port to 96-port, you’ll appreciate the benefts of convenience and
delivered by these quality features.

• Solid and reliable terminations for copper cabling featuring

• Compatible with both 110 and Krone punch-down tools

• Supports 22 to 26 AWG stranded and solid wire

• Cat6 performance (if applicable) is in compliance with the ANSI/TIA/EIA 568 C.2-1 standard

• Ideal for Ethernet, Fast Ethernet and Gigabit Ethernet network applications

• Connects RJ-45 ports to a network

• Meets 19” rackmount standards

• Lifetime Warranty

The images on the following pages of this guide show you the basic installation procedures for
connecting your patch panel to your computer cables.
NOTE: The images on the following pages are representative of all the variously sized (based on
the number of connector ports) patch panels in this TECHLY series. PROFESSIONAL

gold-plated jack contacts

19" Patch Panel, one of a

series of

Whether you

(UTP) or fully

reliability

Front view

Rear view

NOTE: These images are represent ational of this particular
series of TECHLY patch panels PROFESSIONAL
and show the basic design of each model.

Step 1

At the end of each cable to be connected to the
patch panel, strip away 25–30 mm (approx. 1")
of the outer jacket, then separate the inner leads
into four (4) pairs.

Color-Coding Reference

Step 2

Using the IDC color-coding reference (see previous page), position each T568A or T568B wire,
then connect each wire to the patch panel using punch-down tool as shown below.

Step 3

Place each cable in its associated holder (as shown below) to keep them neatly organized,
then place/position the patch panel as desired.

Specifcations

Standards

• IEEE 802.3 (10Base-T Ethernet)

• IEEE 802.3u (100Base-TX Fast Ethernet)

• IEEE 802.3ab (1000Base-T Gigabit Ethernet)

Certifcations

• RoHS compliant

Environmental

• Operating temperature: -40 – 68°C

Package Contents

• Patch Panel

• 4 mounting screws

• Quick start guide

• Nylon cable tie

TECHLY PROFESSIONAL

of active and passive networking products.

Ask your local computer dealer for more information or visit

www.techly.com

All products mentione d are trademarks or registered trademarks of their respective owners.

Copyright © TECHLY PROFESSIONAL

offers a complete line

Quick Start Guide

TLY-PATPAN-QSG-1106-03

2

3

4

5

6

7