TechLogix Networx TL-TP100-HDC User Manual
TL-TP100-HDC Technical Specifications v161102
www.tlnetworx.com | +1-608-960-7242
Technical Specifications
TL-TP100-HDC
The TL-TP100-HDC is an ultra-thin extender set consisting of a transmitter (TL-TP100-HDC-T) and a
receiver (TL-TP100-HDC-R). Using HDBaseT technology, the set transmits an HDMI signal to the
receiver up to 100m distance via a Cat5e/Cat6A cable. Featuring bi-directional IR and RS232, you
can control your display or source using included accessories. With bi-directional PoE power, you
only need to connect the power supply on one end. Each unit has a 2 port network switch and a
10/100 Ethernet connection is extended through the cable.
Specifications
I/O Connections
HDMI
HDMI Type A Receptacle
Twisted Pair
8P8C port (Shielded RJ45)
IR Input
3.5mm TRS Jack
IR Output
3.5mm TS Jack
RS232
3pin phoenix socket
24V DC Power
5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking)
Ethernet
2x 8P8C port (Shielded RJ45)
Supported Video and Audio
Maximum Video Compatibility
Deep Color 36/30/24 Bit at 1080p 40 m: Deep Color 48 Bit at 1080p, 3D,
and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr 4:2:2; up to 60 Hz:
YCbCr 4:2:0
Video Compliance
HDMI, HDCP 2.2, and CEC (Consumer Electronics Control)
Embedded Audio
Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Input DDC Signal
5.0 volts p-p (TTL)
Input Video Signal
0.5 to 1.0 volts p-p
IR Carrier Frequency Range
33-55kHz at 5 volts
Features at a Glance
EDID pass through
HDCP2.2 compliant
4K over Cat 5e/6 up to
100m
1080p over Cat 5e/6 up
to 100m
Bi-directional IR, RS232,
and 10/100 Ethernet
TL-TP100-HDC Technical Specifications v161102
www.tlnetworx.com | +1-608-960-7242
HDBaseT Signal Characteristics
Maximum Distance
100m (330 ft.)
Cable Requirements
Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B
crimp pattern
Bandwidth
10.2 Gbps
Chassis and Environmental
Enclosure
Painted aluminum
Dimensions
152mm x 84mm x 16mm
Shipping Weight
0.71Kg (1.55 lbs) (Tx+Rx)
Operating Temperature
(Environment)
-10° to +40° C
Operating Temperature (Chassis)
45° C
Operating Humidity (Environment)
10% ~ 90%
Storage Temperature
(Environment)
-15° to +70° C
Storage Humidity (Environment)
0%~55%
Power, ESD, Regulatory
Maximum Power Consumption
4.4W (TX), 6.7W (RX)
Power Supply
24V DC
ESD Protection
15KV
Regulatory
HDBaseT, CE, FCC
Other
Standard Warranty
1 Year
Diagnostic Indicators
Power, Link, and HDCP LEDs
Network Indicators
Link Speed and Activity
Included Items
Installation Guide, power supply, US power cord, mounting “L” brackets (4
ea), mounting screws (4 ea), IR Transmitter, IR Receiver
Loading...