TechLogix Networx TL-SMP-HDV Users Manual
User Manual
TL-SMP-HDV
Collaboration Hub
All Rights Reserved
Version: TL-SMP-HDV_170104
www.tlnetworx.com
TL-SMP-HDV User Manual
Preface
Read this user manual carefully before using this product. Pictures shown in this manual
is for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this manual
are acknowledged as the properties of the trademark owner. No part of this publication
may be copied or reproduced without the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.
www.tlnetworx.com
TL-SMP-HDV User Manual
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
l Unpack the equipment carefully and save the original box and packing material for
possible future shipment
l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
l Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
l Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
l Refer all servicing to qualified service personnel.
l To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
l Do not put any heavy items on the extension cable in case of extrusion.
l Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
l Install the device in a place with fine ventilation to avoid damage caused by
overheat.
l Keep the module away from liquids.
l Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
l Do not twist or pull by force ends of the optical cable. It can cause malfunction.
l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
l Unplug the power cord when left unused for a long period of time.
l Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
www.tlnetworx.com
TL-SMP-HDV User Manual
Contents
1. Introduction ................................................................................................................. 1!
1.1 Introduction to TL-SMP-HDV ............................................................................ 1!
1.2 Features ............................................................................................................. 1!
1.3 Package List ........................................................................................................ 2!
2. Panel Description ......................................................................................................... 3!
2.1 Transmitter ......................................................................................................... 3!
2.2 Receiver .............................................................................................................. 5!
3. System Connection ...................................................................................................... 6!
3.1 Usage Precautions .............................................................................................. 6!
3.2 System Diagram .................................................................................................. 6!
3.3 Connection Procedure ........................................................................................ 6!
4. CEC Control ................................................................................................................. 8!
5. IR Control .................................................................................................................... 9!
6. Specification .............................................................................................................. 10!
7. Panel Drawing ............................................................................................................ 12!
7.1 Transmitter ....................................................................................................... 12!
7.2 Receiver ............................................................................................................ 12!
8. Troubleshooting & Maintenance ................................................................................ 13!
9. After-sales Service ..................................................................................................... 14!
1
www.tlnetworx.com
TL-SMP-HDV User Manual
1. Introduction
1.1 Introduction to TL-SMP-HDV
The TL-SMP-HDV is a Collaboration Hub consists of Transmitter and Receiver.
HDBaseT technology is used to transmit high-resolution 1080p/4K signal from
Transmitter to the Receiver over CAT5e/6a/7 cable at a distance of up to 70/40m.
The Transmitter features one HDBaseT output, one built-in IR sensor, one HDMI input,
and one VGA input with built-in VGA scaler function; the Receiver supports one
HDBaseT input, one IR output and one HDMI output.
1.2 Features
l HDMI video resolution up to 4Kx2K @30Hz 4:4:4, compliant with HDMI1.4&
HDCP1.4.
l VGA input video resolution up to 1920x1200 @60Hz 4:4:4.
l When VGA video is selected as input, the output resolution will be enhanced to
1080p automatically to assure high-definition image.
l Maximum transmission distance is 70m for 1080p and 40m for 4Kx2K over
CAT5e/6a/7 cable.
l The Transmitter are powered by the Receiver by PoH technology.
l Support front panel button control, and the buttons can replace the key functions of
IR Remote based on IR learning function.
l Support manual CEC control.
l Support Micro USB online firmware update.
l Support Hot-plug.
l LED indicators show work status.
2
www.tlnetworx.com
TL-SMP-HDV User Manual
1.3 Package List
l 1 x Transmitter
l 1 x Receiver
l 1 x IR Emitter
l 8 x Rubber feet
l 1 x Iron Plate (mounted in the bottom of Transmitter)
l 2 x Mounting Ears with 2 screws (for Receiver)
l 1 x Power Adapter (12VDC 2A)
l 1 x User Manual
Note: Confirm all the accessories are included, if not, please contact with the dealers.
Loading...