TechLogix Networx TL-SMP-HD User Manual
TL-SMP-HD Technical Specifications v161223
www.tlnetworx.com!!|!!+1-608-960-7242!
Technical Specifications
TL-SMP-HD
The TechLogix TL-SMP-HD is an HDMI collaboration system which includes a control system to turn
on and off the display and adjust the volume on the display with physical buttons on the top of the
transmitter. The display may be controlled by CEC or IR commands. EDID information from the display
is passed to the HDMI input, which supports video signals up to 4K/30.
With a 70 meter (220 ft) range, the TL-SMP-HD is not limited to a purely table top installation. The
transmitter is provided power from the receiver via the twisted pair cable.
Specifications
Transmitter I/O Connections
HDMI In
HDMI Type A Receptacle
TP Out (Bottom of device)
8P8C port (Shielded RJ45)
IR (IR learning only)
Embedded IR receiver
Firmware
Micro USB Type B
Receiver I/O Connections
HDMI Out
HDMI Type A Receptacle
TP In
8P8C port (Shielded RJ45)
IR Out
3.5mm TS Jack
DC 12V
5.5 mm Outside Diameter, 2.6 mm Inside Diameter Barrel (Locking)
Supported Video and Audio
Maximum Video Compatibility
70 m: Deep Color 36/30/24 Bit at 1080p 40 m: Deep Color 48 Bit at
1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr
4:2:2; up to 60 Hz: YCbCr 4:2:0
Video Compliance
Embedded Audio
Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Input DDC Signal
5.0 volts p-p (TTL)
Input Video Signal
0.5 to 1.0 volts p-p
IR Carrier Frequency Range
33-55kHz at 5 volts
Features at a Glance
•
Designed for table or podium-top use
• HDMI input; HDMI output
• Twisted pair between transmitter and
receiver
• Buttons for display control
• Powered from the receiver
• 220 ft. (70m) max distance between
the transmitter and receiver
HDMI, HDCP 1.4, and CEC (Consumer Electronics Control)
TL-SMP-HD Technical Specifications v161223
!
www.tlnetworx.com!!|!!+1-608-960-7242!
Extender Signal Characteristics
Maximum Distance
70 m: Deep Color 36/30/24 Bit at 1080p
40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz:
RGB, YCbCr 4:4:4, YCbCr 4:2:2; up to 60 Hz: YCbCr 4:2:0
Cable Requirements
Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B
crimp pattern
Bandwidth
10.2 Gbps
Maximum Distance
70 m (220 ft)
Chassis and Environmental
Enclosure
Top: Gray ABS, Bottom: Painted Steel
Transmitter Dimensions (HxWxD)
42 mm x 150 mm x 120 mm (1.65 in x 5.91 in x 4.72 in)
Receiver Dimensions (HxWxD)
23 mm x 130 mm x 102 mm (0.91 in x 5.12 in x 4.02 in)
Shipping Weight
1.72 kg (3.80 lbs)
Operating Temperature
(Environment)
-10° to +40° C
Operating Humidity (Environment)
10% ~ 90%
Storage Temperature
(Environment)
-15° to +70° C
Storage Humidity (Environment)
0%~55%
Power, ESD, Regulatory
Maximum Power Consumption
4.4W(TX), 6.7W(RX)
Power Supply
12V DC
ESD Protection
15KV
Regulatory
CE, FCC
Other
Standard Warranty
1 Year
Transmitter Diagnostic Indicators
Power LED, HDMI active LED
Receiver Diagnostic Indicators
Power LED, Twisted Pair LEDs
Included Items
Power supply with adapters (US, EU, UK, AU), mounting “L” brackets (2 ea),
mounting screws (2 ea), IR Transmitter, Rubber feet (8 ea)
Loading...