TECHLIGHTING 700FJPJLD7 Series Installation Instructions Manual
Installation Instructions for
920FJPJLD7C
Combination FreeJack and Power Jack Canopy
MULTI ORT-P CANOPIES
GP I :ENERAL RODUCT NFORMATION
This product is suitable for dry locations only.
IMPORTANT! If the canopy is wood, do not install any
head or pendant closer than 12 inches to this canopy.
Heat from the lamp may damage the wood.
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN OFF POWER TO THE
ELECTRICAL BOX.
700FJPJLD7_
CAUTION—RISK OF FIRE
1.1
Install the Backplate
1A
1 1 1 1 11
1
Remove all ten (10) button head screws around the
chandelier canopy.
1B
BACKPLATE
1C
BACKPLATE
3
4
4
2
Lift the backplate out of the canopy.
3
Feed the power line wires through the hole in the
middle of the backplate.
Mount the backplate to the electrical box with the two
4
long #8-32 screws provided.
1
Install the Canopy
1D
5
6
5
Line up an anchor with the center of a backplate hole
and push the anchor in up to the threads.
7
2A
1
1
7
SAFETY
BRACKETS
1
SAFETY
CABLE
Screw the anchor the rest of the way in with a
6
screwdriver.
Secure the backplate to the anchors with the screws and
7
washers provided.
1
Hook a safety cable through the safety brackets on each
end of the canopy and backplate.
2
Loading...